Trying to use Huawei E153 dongle with FC13, but had no luck.
"lsusb" returned following:
I tried "usb-modeswitch-1.1.7" too, but I couldn't install it.
Errors which I got are listed in attached error.txt file.
How can I get Huawei 3g modem E153 connects on F14 ? I've tried settings in network manager applet to set it with no success.
View 3 Replies View RelatedJust installed Centos5.5 and i want to install huawei E153 HSDPA on centos how do i do this ?
View 2 Replies View RelatedNeed a bit of help with this have got the broadband side working lovely on Mandriva linux but it should show as a removable drive in fact in windows it shows as two on linux none its as if there not there.Can anyone point me in rite direction to sort this.it sort of see but it just is not available normally removable drives just come up
View 1 Replies View RelatedI got a Huawei USB dongle (modem) that I use to access the internet. This of course required usb_modeswitch. My question is, how can I remove the storage functionality completely so that it does not show up anymore among the drives and simply be visible as ONLY a modem?
View 1 Replies View RelatedAnyone know how can get a vodafone huawei 4511 dongle working on ubuntu?
I've spent several hours reading stuff, most of which is way above my head.
I plug it in, set it up in "edit connections". Nothing happens.
It shows up in disk utility twice, as a usb vodaphone storage (huawei) and cd drive (vodafone cd rom)
I switched from puppy to ubuntu because I read that you could just plug dongles into ubuntu and they would be recognized. (Spent many many hours trying to get it working in puppy.)
Does anyone yet know of any Linux distro which offers native support for this usb HSDPSA dongle?
Failing that, any distro which can be hooked up to it with minimal tinkering.
Does anyone know how to connect to Huawei E122 Mobile dongle? I used to connect to E169 usb stick via umtston.
View 3 Replies View RelatedI'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedCode:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies View RelatedI just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
View 6 Replies View RelatedCan I migrate from fc12 to fc13 or do I have to do a full re-install? If I can migrate, can you point me to the instructions/working paper/etc.?
View 6 Replies View RelatedI have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
View 5 Replies View RelatedI am trying to setup VNC server on FC13 box. i am not able to do proper configuration. Can anone point to me a good link which is working. I did many configurations. but no success yet. I have an issue especially with xstartup script. I am running VNC server on Linux and RealVNC viewer on Win Vista OS.When i try to connect to VNC server from RealVNC viewer from Win Vista. It gives error like "unable to connect to host: Connection timed out (10060)"
View 4 Replies View RelatedFollowing this from the wiki: It states Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update. How do you ensure that its the last package to update?
First install the new fedora 13 gpg key. You may wish to verify this package against [URL] and the fedora ssl certificate.
rpm --import [URL]
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=13 distro-sync
- Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV.
- Intel video no longer works without Kernel Mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- nVidia video no longer works without kernel mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.
I have FC 13 with both KDE and Gnome loaded. Over the last couple of years of using linux. I've found Gnome better suitable for my needs than KDE and now I'm stuck!
View 6 Replies View RelatedI did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:
Code: default=0
timeout=0
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I need an non-interactive, symetric, passphrase mechanism that can be used on machines beyond my sys-admin control. Currently, I use the Python code (with variants):
Stat, Output = commands.getstatusoutput(
"gpg -c --passphrase=%s '%s'"%(Password, TarFileName))
to encrypt and decrypt files (tar balls). The "Password" is generated by a Python code on a singular removable flash drive. It worked with FC11 and Windows, but with FC13 I get an interactive dialog, which gets canceled, and then: can't connect to `/home/{a user id}/.gnupg/S.gpg-agent': No such file or directory
gpg-agent[3432]: command get_passphrase failed: Operation cancelled
gpg: cancelled by user
gpg: error creating passphrase: Operation cancelled
gpg: symmetric encryption of `testdata' failed: Operation cancelled
The operator does not know the pass phrase. This is a single user mechanism which relies upon the mounting of the special flash drive to work. The application is portable across many platforms and hosts, but can only be used by the possessor of the flash drive.
got my upgraded fedora 14 partition to boot, but I find out that I had to reinstall my nvidia driver, no big deal. seemed to go ok, but now when I go applications->system tools -> terminal I get the "starting terminal" thing on the bar, and then nothing. Can't figure out whats up.
View 4 Replies View RelatedI have just updated to FC 13 (64 bit), and there seems to be a problem with Jabber in Kopete. I use this to connect to the google talk servers. In FC 12 this was not a problem. However, now I recieve a message "Cannot load the Jabber protocol plugin." when trying to add a Jabber account in kopete. This happens on two separate recently upgraded machines.
I suspect the kdenetwork package shipped with FC 13 is broken in this respect.
EDIT: Updating to the kde packages from the kde-testing repository fixes this, so it looks like the package is indeed broken.
I have a fresh install of FC13, nVidia 9800 GTX+ video card but no 3D.
View 4 Replies View RelatedI have a mivvy l310 netbook. Before I had FC12 on it and I couldn't upgrade (not enough space on /boot, tried all commands and it didn't worked) to FC13. So I said I would do a fresh install for FC13. I used live CD FC 13 iso to make the usb drive (16gb) bootable.It boots, all goes ok, untill the installation is in progress of copying files to my HDD (at this point my HDD is empty, since it was formated). At about half of the progress bar of copying the installation files to HDD it stops with: ""There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media."" I can't go further and install it. I tried making the usb drive on FC13 (finished successfully, on another laptop with liveusb creator) and also on SUSE and it behaves the same.
I also tried second method (described in a thread around here, it worked for me in the past for FC11), by just making the usb drive bootable, using commands in the terminal (here my FC13 kernel, on another laptop crashes, for some commands) and when I try to install I get only: "missing operating system, sleeping forever". For this method, it does not boot at all, so I guess the usb drive is not properly setup. I don't know what else to try. I tried normal dvd iso, live cd, tried making the usb using commands, using live cd, with commands on suse, on FC13 etc...
LE: I found in messages log that I have: zlib_inflate error fc13
LE LE: what's more weird is that I downloaded the same live image of FC13 and burned it on a CD and managed to install it on my other laptop and it worked.
Later update: I tried now with the DVD iso for FC13 and now I get: operating system not found
I have a GeForce 7100 GS Nvidia card (that is, a 2 year old card: not old, not new), that I always used with the kmod-nvidia kernel modules without a problem.But FC13 installs nouveau, drivers for nvidia cards. I tried those, and glx is too slow. Foobilliard and gl-117 games are VERY slow, glxgears shows 400 fps. Is there a xorg.conf trick?
View 3 Replies View RelatedI installed pidgin 2.6.6 on fedora 13 and setup as following:
protocol: yahoo
pager server : scsa.msg.yahoo.com
port: 5050
file transfer server: filetransfer.msg.yahoo.com
file transfer port: 80
[Code].....
Post upgrade from 12-13 my Banshee installation is refusing to play CDs. In fact it doesn't even recognise there is one in the drive.
The icon appears on the desktop ok when I put on in and I get asked what I want to use to open it so it seems the system itself recognises a CD but for some reason Banshee doesn't.
I got an error about Banshee needing CD Audio Plugin, which I told Banshee to try and find but it failed. No idea where to go from here.
Worked it back to gstreamer-plugins-bad / ugly packages were wanted. So removed with yum then allowed banshee to try finding them.
It got as far as asking for root auth which I gave it, it them fell over in a heap.
Now it seems banhsee is no longer on my system and has some dependency issues....
[root@bigfoot log]# yum install banshee
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]....
I am using FC13 (2.6.33.6-147.2.4.fc13.x86_64) with a ASUS MB/Athlon II X4 CPU for the hardware.Recently my workstation keeps freezing, the power is still on, but the screen goes black,I cannot ping it from other computers on the network, the only thing to do is to press the power switch.
Questions:
* I cannot find any messages in the log, no kernel panic message on the screen, I even installed kdump but no kernel dump is created,does it means it can only be a hardware problem ? I have a vendor kernel module for my NIC and my video card could they cause that kind of problem ?
* I am logging the CPU temp every minutes and I notice that on a few occasion the CPU is close to 70C when the workstation freeze,is 70C too hot for the CPU, is that what CPU do when they reach a temp to high for them to operates ?