Debian Installation :: 7.7 I386 Install On HP P440ar Storage Array
Mar 18, 2015
I am having problems installing Debian 7.7 i386 on the newest HP DL380 GEN9 server with P440ar storage array. The disk detection during installation fails to detect the array.
I have pinpointed the problem to hpsa.ko driver to be outdated as I need a minimum version from September 2014. I have already tried following the guide on " [URL]" but the driver compiling from sources fails (guide is from 2012).
Here is where I got the latest sources: [URL]....
Is there any possible way to install this debian version with this storage array? Newer kernel version is really not an option for me.
"3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux"
View 13 Replies
ADVERTISEMENT
Mar 20, 2011
I'm in need to replace a harddrive with higher capacity one but I can't tell which bay is holding on to a drive which has the OS. I don't want to pull the main drive. just wondering if there is a way to light up the led light next to physical drive/bay so I don't accidentally yank out the wrong one.
View 4 Replies
View Related
Jun 22, 2011
I'm trying to delete directories (long story, Mac temp files there, Windows not cooperating) on a sever connected to a HP 20 Modular Smart Array set up as RAID5. System currently running Windows. I've booted from a 9.10 LiveCD but can't see the external drives. Is it correct that I need to install mdadm to "see" those drives from LiveCD? From a different machine (linux) I can mount the drive using samba like so:
sudo smbmount //IP address/hostname RAID5 Root Share /mnt/ntserver -o username=smith,password=abcde123
I have admin privileges on the Windows OS. In linux (or Windows beforehand), is it possible to take ownership of the directories so that I can do a rm -f -r <dir> ?
View 6 Replies
View Related
Jul 5, 2011
I have an Acer Altos EasyStore SATA NAS box that hung, the only way to reboot was to crash the system (unplug it). Upon reboot it was not recognising the hard drives (it wanted to do a destructive reinitialize). Most of the importent data was backed up, however some was overlooked and we'd quite like to get it back. Removing the disks and placing them in a PC with enough SATA bays to cope, and booting with a live linux distribution (System Rescue CD) I can see the 4 drives are not suffering hardware error and that the original partions exist. Using mdadm I can assemble the Arrays without error (seems to be three but the only one I am concerned with is the RAID5 array of about 3TB). /dev/m1p2 mounts as a loopdevice once an offset is entered. In turn this mounts as an XFS parition. However despite df showing the partition almost to be full. ls -l or ls -a on the mount point shows it to be empty!
I got thusfar using a translation from a German language forum, unfortunately I only speak a little German, and the only other English language post on a simlilar matter I found within that site had no replies. The next step was to unmount loop, then run xfs_chack and xfs_repair on the file system. xfs_check returns that there is are a few dir size and offset errors along with link count mismatches. This I would presume normal for a file system that has become slightly corrupted. xfs_repair (version 3.0.3) gets as far as Phase 3 it finds and corrects zerolength entries, offsets on directories and bogus inode numbers. However the final two lines are:
Code:
realloc failed in blkent_append (2671166480 bytes)
zsh: segmentation fault xfs_repair /dev/loop1
A search on the error missing out data size just returns code to generate it, is anybody able to explain what it means? Also remounting hard drive, ls and varients of still do not return anything. Am I missing some thing (root I am logged in with now would have different credentials presumably to root on the NAS box, so how do I get around this)?
View 5 Replies
View Related
Jul 13, 2011
My goal is to connect up a bunch of CentOS 5.6 servers to storage array which is running as an SRP target. These servers will be running eventually as Xen hypervisors. I'm using Mellanox Infiniband cards and a Qlogic Infiniband switch.
OFED drivers are already installed as standard. I have done the following.
1. Base install of CentOS 5.6 X86_64
2. Installed the following packages...
openib
ibutils
srptools
infiniband-diags
opensm
[Code]...
It works perfectly and connects to the target immediately with great results. I'd just like this to happen correctly on startup.
To work around the issue I have added the line srp_daemon -e -o into the init script for opensm /etc/init.d/opensmd but it doesnt always start the srp_daemon process. Its rather hit and miss
I'd really like srp_daemon to run as a service with a proper init script but I wouldnt know how to write one. I understand that this issue has been addressed in the RHEL6 srptools package but that doesnt help me because the software I intend to use on these servers specifically requires 5.
View 4 Replies
View Related
Mar 11, 2011
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
View 4 Replies
View Related
Jul 24, 2010
There's a certain program I'm trying to run that will only work with the 32-bit version of a certain library - the 64-bit version included in the repository won't work for it. I found an i386 .deb package online (made for ubuntu but it should work with regular debian), but when I try to install it, it says incorrect architecture, use amd64 version instead.
How can I force it to accept the i386 version of this package?
View 14 Replies
View Related
Apr 4, 2011
I got a i386.bin software,but I can't installed it on my amd64 Debian.
Quote:
#dpkg -i --force-architecture .i386.deb
can install i386.deb software,but how to install the i386.bin?
View 4 Replies
View Related
Mar 22, 2011
iam unable to install axel in debian 6.0 i386 while installing through Synaptic Package Manager its Saying that there is No package of "axel"
View 1 Replies
View Related
Nov 4, 2010
downloaded the install dvd mounted it and ran it but I am getting an error line 55 of the kickstart file: section does not end with %%end install exited abnormally.
View 3 Replies
View Related
Feb 14, 2016
I have tried to download the latest XFCE Live CD 8.3.0 i386 both by HTTP & torrent & have tried the same at various mirrors but the download consistently fails.
View 1 Replies
View Related
Mar 25, 2011
I installed Debian Squeeze on a laptop today, with the official i386 DVD1. At the end, I was very disappointed to notice the installer automatically chose the amd64 kernel (with i386 packages ? how does that work ?). The hardware is compatible, but I'd really like to use the i386 kernel instead. Earlier, you could choose the kernel during installation ; I looked in Expert install with no luck. Where is it ?
View 4 Replies
View Related
Aug 4, 2011
I just installed Debian stable from the standard i386 DVD. When I booted up, I noticed that GRUB showed me that I had the amd64 version of Debian installed. However, I did not download an amd64 DVD, nor do I want that architecture installed on my system (even though my system can support it). The output from "uname -a" (which included both "amd64" and "x86_64") also seem to confirm this. However, I was able to install 32 bit packages and get them to work (gdebi wouldn't even let me do this when I had Ubuntu 32-bit).
View 4 Replies
View Related
Jan 15, 2009
Installing f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
View 13 Replies
View Related
Apr 18, 2009
I would like to try out fc10 on an old, k6-2 pc. Last night I tried to download the dvd, but firefox 'completed' the download with only 1.2/~3xg, and of course it didn't work.
I am trying a test net installation in VirtualBox, so far so good.
However, I would rather have a more complete installation on hand and I'm looking at the full install cd's --there are 6 of them.
[url]
Are all 6 required for a minimal install, or could I get by with one (or two, etc)? For example, with debian installation cds you can use just the first one -- the rest are just a complete set of packages for everything +kitchen sink.
View 1 Replies
View Related
Nov 14, 2009
I have VISTA home installed in my HP DV5 laptop and I have installed MS Virtual PC. When I try to install Fedora 11 i386 get stop at "SMP alternatives: switching to UP code" and won't proceed.But I installed Fedora 11 i386 in my desktop using same steps it work fine.
View 2 Replies
View Related
Apr 30, 2010
Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies
View Related
Mar 2, 2011
im trying to install wine1.3 and i need to upgrade libc6-i386 so i let apt-get try to do it, but it hangs at unpacking the deb, normally it has no problem no error occurs just sits there like its a huge deb but its only 3mbs. ive tryed using synaptic and doing the following.
sudo rm /var/lib/dpkg/lock
sudo dpkg --configure -a
sudo rm /var/cache/apt/archives/lock
sudo apt-get check
sudo apt-get clean
[Code]..
View 1 Replies
View Related
Aug 17, 2010
Im trying to install Ubuntu server for DVD/CD iso.The mdsum is correct: md5sum ubuntu-10.04-server-i386.iso ives 15342636441181f7a19c65984b44e24c ubuntu-10.04-server-i386.isoI have tried it a number of times and the same sequence re-occurs:The first error occur during �Installing the base system�First sign is a red screen displaying a �Debootstrap warning� After a few re-tries the system defaults back to the Installer menu:I then select to post the debugger logs to a web server that starts:the first sign of problems in syslog are:
Aug 17 09:35:35 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Aug 17 09:35:37 hw-detect: Loading PCMCIA bridge driver module: i82365
Aug 17 09:35:37 kernel: [ 268.912151] Intel ISA PCIC probe: not found.
[code]....
View 5 Replies
View Related
Jan 17, 2011
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386# ls
bin ChangeLog conf data doc init.d install.sh lib README script
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386# ./install.sh
There is running avgd deamon. Stop it first, please.
Installation aborted
root@amudo-linux:/home/amudo/avg85flx-r863-a3205.i386#
I want to install AVG8.5. but I do not understand to stop avgd daemon. What should I do?
I use Ubuntu 10.10
View 1 Replies
View Related
Apr 29, 2011
Trying to install a newly downloaded DVD image of 11.04 this morning on my T410 LT (4 core/4GB). The image MD5'd okay, burnt it, stuck it in the drive, rebooted, asked me about install lang = english, select install ubuntu, get subject error and it falls into initramfs prompt.So, I put my 10.04 install CD in and guess what, it works!
I will repeat what I have already posted in the another forum, and I understand install is a difficult part of the system, but there is always some glitch or another just trying to start install with ubuntu. Once it runs, if it run, I normally see few other problems after that.
View 2 Replies
View Related
Dec 22, 2010
I installed Debian 5.0.3 (Backport with .34 Kernel), because my server hardware (Dell PowerEdge R210) needs special firmware and drivers.However, the installation went quite smooth.I put the system on a RAID 1 Array with about 500 GB space.s I said the installation went well, however, it doesn't boot! No GRUB, nothing
View 4 Replies
View Related
Nov 26, 2015
I'm having issues with a RAID array.
Setup is like this:
Debian Jessie, 2 hard disks, each having 2 partitions: /dev/sda1, /dev/sda2, /dev/sdb1, /dev/sdb2. Partitions were paired during installation, so they form /dev/md0 and /dev/md1. /dev/md0 is the root (/) partition, /dev/md1 is for /home.
At the end of the install process, I chose /dev/sda1 to carry Grub. And I think this is where I screwed things up.
After removing one of the hard drives, there was no boot capability. So, I installed Grub on /dev/sdb, too.
Now it displays the boot menu but cannot find the kernel. This is where I got lost in the process.
Do I need to reinstall the OS or is there a way to fix it? I suppose I have to edit Grub.
View 0 Replies
View Related
Aug 21, 2010
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string
len equ $ - msg ;length of our dear string
section .text;section declaration
[code]....
View 3 Replies
View Related
Nov 19, 2010
Like it says in the title, I am thinking it should be this hard to install the RAID1 array in my brand new PC. Here is what is happening. I have two brand new 1TB drives that I am attempting a new, fresh install of 10.10 on (in fact, the entire box is new). I am attempting to use the alternate desktop install so that I can have access to the manual partitioning (which is required to setup RAID 1, correct?).
I tried to use the guide here: [URL]... I followed the steps, but when I got the the very end (after selecting and creating the MDs) I get an error message stating that there is no root file system defined. I went back and checked all the steps and I am sure I followed everything in the guide.
Here are some quirks (not sure if they are bugs or not) In step 5 of the disc partitioning, it says to select the bootable flag and set it to yes (I am assuming). I press enter over that options, the screen flashes really quickly to a progress bar, but then comes back to the options screen and it still says bootable flag is off. No matter how many times I do it is says "off".
Also, and here is the bigger problem I think. - So the guide says to select the free space in each drive and then select Automatically Partition the free space, which I do, and it comes back and looks formatted accordingly - has 975.6 GB ext4 / and 24.6 GB swap swap. No Problem there.
BUT - whenever I do the same thing to the second drive, the partitions on the first seem to disappear. Meaning, it doesn't say free space, and has two partitions listed, but the / and the swap (last items in each row) have moved to the second drive partitions. I am not sure if this is how it is supposed to be since the pictures in the linked guide to not show what it looks like after that. THis is driving me crazy and I have to have it set up in RAID 1 and unsure as to what it is I am missing.
View 1 Replies
View Related
Feb 3, 2011
I'm trying to switch to a new RAID5 array but can't get it to boot. My disks:/dev/sda: new RAID member
/dev/sdb: Windows disk
/dev/sdc: new RAID member
/dev/sdd: old disk, currently using /dev/sdd3 as /
The RAID array is /dev/md0, which is comprised of /dev/sda1 and /dev/sdc1. I have copied the contents of /dev/sdd3 to /dev/md0, and can mount /dev/md0 and chroot into it. I did this:
Code:
sudo mount /dev/md0 /mnt/raid
sudo mount --bind /dev /mnt/raid/dev
sudo mount --bind /proc /mnt/raid/proc
[code]....
This completes with no errors, and /boot/grub/grub.cfg looks correct[EDIT: No it doesn't. It has root='(md/0)' instead of root='(md0)']. For example, here's the first entry:
Code:
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-25-generic' --class ubuntu --class gnu-linu
x --class gnu --class os {
[code]....
However, when I try to boot from /dev/sda, I get:
Code:
error: file not found
grub rescue>
View 9 Replies
View Related
Dec 19, 2009
I'm trying to install Fedora 12 i386 using CD#1 for a minimal install. For that during installation I selected only Base. For some reason when I started installation it was trying to install 432 packages (Base has got about 80 or so packages). i can understand there might be some dependencies, but really that much? I kept going with the installation of 432 packages, but it finally failed on gtk2-immodule-xim-2.18.3-19.fc12.i686.rpm.I need just minimal install, so I can install LXDE later on by myself.
View 11 Replies
View Related
Oct 11, 2010
I've googled my problem but I'm not sure I can find an answer in layman's terms. So here's my noob, simple question, please answer it in semi-noob-friendly terms I've been trying to install ubuntu for a while on my desktop pc. I gave it another go with 10.10 but I always have the same problem:
I've got two raid sets connected to an ich10r chip and they work fine in windows (2 samsung 1to + 2 raptors 75gb). Upon installation, dmraid only sets up the first raid set (Samsung array) but not the second one (Clean raptors intended for ubuntu). I don't have any other installation option, all my sata connectors are unavailable. So, is there a manual install solution? Can I force dmraid to mount the second raid set and not the first one? I think I read somewhere that this was a dmraid bug, but I can't find it anymore.
View 8 Replies
View Related
Jan 8, 2010
im trying to install ubuntu 9.10 desktop i386 version, but i simply cant do it! I have tried for hours now. I boot my computer, the cd-room boots, i choose language from the list and press install ubuntu, after that i see the ubuntu logo blinking and in few minutes it gets black and shows "Input Not Supported" and its just bumping around the screen! I had a feeling that maybe my monitor (ASUS) does not support ubuntu so i tried with a very old syncmaster monitor, but similar message appeared! What could be the problem?
View 1 Replies
View Related
Apr 11, 2011
I recently got interested with with OS.. So I downloaded wubi in Ubuntu website. I opted for the Ubuntu Netbook Edition as am using a lappy. However, halfway through finishing download I got an error. The log shows:
OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.10-netbook-i386.iso'
View 1 Replies
View Related
