Ubuntu Servers :: Mainboard And Storage System - How Both Storage Devices Will Be Supported By Debian
Mar 11, 2011
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
View 4 Replies
ADVERTISEMENT
Jun 18, 2014
I want to disable mounting usb storage devices except some devices based on its vendor id. I tried by adding below udev rule in debian wheezy
Code: Select allACTION=="add", SUBSYSTEMS=="usb", RUN+="/bin/sh -c 'for host in /sys/bus/usb/devices/usb*; do echo 0 > $host/authorized_default; done'"
ACTION=="add", ATTR{idVendor}=="054c", RUN+="/bin/sh -c 'echo 1 >/sys$DEVPATH/authorized'"
But it disabled all usb devices(USB keyboard and mouse). How can I allow other devices except storage devices.
View 0 Replies
View Related
Mar 29, 2010
I am running Lenny. USB storage devices are painfully slow, if the data to be copied is above 4GB it works on transferring for more than half an hour and then comes up with an error dialog(saying something like file size is too big). The problem exists in both read and write.
I did google a bit and here is the output of lsmod | grep hci
ehci_hcd28428 0
uhci_hcd18672 0
usbcore118192 4 usb_storage,ehci_hcd,uhci_hcd
[Code].....
View 2 Replies
View Related
Jun 8, 2010
I am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
View 3 Replies
View Related
Jan 26, 2010
I have collected a number of computers over the years, and now I would like to put them to good use. I considered UEC, but many do not support hardware virtualization and all I really need is storage. Over all the machines, I estimate that I have 4-5 terabytes of storage, all going to waste because each one has relatively low storage space. Is there any way I could setup a redundant storage solution that utilities these machines in a networked system?
View 4 Replies
View Related
Sep 30, 2010
My friend bought a new PC, and he's duel booting Ubuntu 10.04LTS and Windows 7 Ultimate. At first I tried partitioning the hardrive using fdisk in Ubuntu, but it couldn't find hda. After looking in /dev/, there wasn't hda, or any sd* devices. I looked in gparted and used the installer afterwards and both came up with nil. I installed Windows, updated the BIOS using the utility that came with the mobo, and tried seeing if Ubuntu could detect my hardrive and it couldn't. I even turned ACPI off when booting and that didn't work either.
The motherboard is a new Gigabit with 3 PCIe slots and a USB3.0.
View 2 Replies
View Related
Mar 23, 2011
[URL]
In the above link am using for the Disable for USB device. how i can re enable the USB devices.
View 2 Replies
View Related
Jan 2, 2011
My USB devices are being detected when I run the 'lsusb' command.However there is no driver that is set to the device.Also the /dev/sdX device is created so there is a mount point
View 1 Replies
View Related
Jun 14, 2009
I've been running F10 with a four disk RAID5 setup that has been working fine, however when I tried to do a fresh install of F11 I can't get past the "Select Country" and "Select Keyboard" screen of the GUI as a message will say "Detecting Storage Devices" and then throw up an error. I can't give you the full error, because when I click Save The Detecting Storage Devices box appears and I can not select anything under it or enter my Bugzilla account.However, when I plug just the hard drive that has XP on it then the installer continues swimmingly.I've backed up everything, so if I have to I could zero out the drives however they're all rather large so it'd take an inordinate amount of time.
View 2 Replies
View Related
May 3, 2010
Running various applications, including Open Office, I need to open files from my external hard drive, from within said application itself. But the file menus for all my applications list only the files of my primary hard drive, and I can't look at other drives. Surely there must be some way to do this.
View 2 Replies
View Related
Dec 9, 2009
I'm installing F12 on a new HP ML-350 G6. The machine has 4 Gb memory, and a Smart Array P410i SAS controller. There are two 72 Gb disks set up as a RAID 1. I'm using a full install DVD. There are no other storage devices other than the RAID, a USB tape drive, and the DVD drive. When I try to install F12 it hangs after setting the keyboard type with "Finding Storage Devices". I've let it sit for an hour or more and it doesn't get beyond that.
F11 installs on the machine with no problem. I've used the F12 DVD on other machines with no problem (but not any other ML-350s). If I switch to a console session, dmesg shows the driver for the controller (HP CISS) has loaded and the RAID drive recognized. The appropriate devices (/dev/cciss/c0d0, /dev/ccss/c0d0p0, etc.) are all present in /dev.
View 1 Replies
View Related
Jun 22, 2011
Using Fedora 15 64 bit. The problem is when I put in a USB stick (directly into USB port front or back), or SD memory card via Card reader, they take a long time to auto mount. About 30 seconds. I've tried a few different USB sticks and memory cards. Once mounted they work fine. This is a new install, been running for a few weeks, but the problem only seems to have started in the last few days. Also, not sure if it's related, but now Shotwell takes about 30 seconds to start. The screen comes up, but the interface in non responsive for around 30 seconds. Both USB and Shotwell problems seem to have started at the same time.
View 3 Replies
View Related
Sep 7, 2010
steps to block usb mass storage devices in linux
View 2 Replies
View Related
Aug 4, 2010
I am currently working on fedora 12.I Tried to install Fedora 13 on my System but dont know why Installation being stopped while looking for basic storage devices .how to come out from the problem?
View 1 Replies
View Related
Jul 15, 2010
What is the command or script that is run to check the storage devices like Netapp or Hitachi?
View 4 Replies
View Related
Apr 30, 2010
Getting very frustrated trying to install F12 to my work PC. Its a dell precision 670 with a 3ware 9550sxu raid controller running raid 5. Its consistently crashing at the point when it says 'finding storage devices' with a message about : Mismatched Sizes. What I could try? I had no problem on this machine with fedora 11, so whats changed? Just for info by the way, theres two raid volumes on this system a 750Gb that contains my windows vista installation in a 500 Gb partition (NTFS) and the free space I'm using for fedora. The second volume is a 2TB data volume with a single data partition (NTFS).
View 1 Replies
View Related
Apr 17, 2010
The intention is to have this system dual-boot. When i first put it together, i decided to setup a raid5 array spanning 3 sata drives. I installed Windows 7 first, decided i'd get to Linux later. I left 150mb or so at the beginning of the array for /boot, and about 200gb at the end for my linux install. i'm getting to the linux install. My distro of choice is Fedora 12. I start the setup, and at the point where it's time to partition, the installer tells me that its unable to find any suitable storage devices.
I Crtl-Alt-F2 to a console, and fdisk -l. Fdisk reports three individual drives which all have partitions already. All have free space. None make sense. So i turned to google, and found some threads which explain that this chip doesn't run a true raid, rather its what's been referred to as fake raid. Which is that it depends on the windows driver in order to actually present the array to the OS, and that the best way to get by that on linux, is to break the array, and use LVM instead.
That's all well and good, but i lose two things in doing that. First i lose the resiliency of raid 5, and second, well, what does that do to my windows install? I've considered moving all of my data from windows to other machines, and then just starting from scratch, but i'd really much prefer a method of using the chips fake raid in linux. Is there a driver, or module which i can install to make this happen?
View 3 Replies
View Related
Oct 18, 2010
I'm trying to get a complete overview of booting so I can multiboot. An explanation of the hardware that stores data and the hardware that runs it with the paths the data takes would be awesome!
Here are some quotes that are not comprehensive.
Quote from [url] "When the processor first starts up, it is suffering from amnesia; there is nothing at all in the memory to execute. Of course processor makers know this will happen, so they pre-program the processor to always look at the same place in the system BIOS ROM for the start of the BIOS boot program. This is normally location FFFF0h, right at the end of the system memory. They put it there so that the size of the ROM can be changed without creating compatibility problems. Since there are only 16 bytes left from there to the end of conventional memory, this location just contains a "jump" instruction telling the processor where to go to find the real BIOS startup program."
System Memory is your RAM is it not? Why are they being specific in stating the address location in the Firmware that BIOS uses? An external EEPROM on the board is totally different from RAM is it not? Does the BIOS data travel to a specific RAM Location?
Is there a small processor connected to BIOS or is everything run with the Main CPU?
What exactly is the "chipset" that is referred to with booting?
View 2 Replies
View Related
Jan 24, 2010
I'm running Ubuntu 9.10 with Kvm. I've used a howto to configure my network. Seems to work fine, I've installed the Virtual Machine manager, when I go to create my Virtual Machine, I see the the image is automatically created in /var/lib/libvirt/images. I have a totally separate path for my images. How to I configure a different image directory
View 1 Replies
View Related
Mar 22, 2010
I wanna try to install ubuntu server on my poweredge 1955 with emc storage, but on the partitioning step it says:
"the following partitions will be formatted:
...<here goes all the lvms in the storage>..."
I already tried all the options in the partitioning step without success
View 3 Replies
View Related
Jul 1, 2011
I am looking for the best/cheapest way to build a ubuntu server with 8tb of storage hanging off of it.
I don't feel it needs to be hardware raid, so more software raiding swap in and out failed disk drives.
The server itself normal duo core CPU with 2Gb of memory and i would like to have the internal drive of the O/S only.
View 8 Replies
View Related
Apr 1, 2011
I am trying to disable USB storage from servers.What I did is as following1> modprobe -vr usb_storage2> blacklist usb_storageIt is working fine. But root can again load the module into the kernel. [ modeprobe -v usb_storage ] want to restrict this also. My requirement is not even root can access the usb storage.
View 5 Replies
View Related
Jan 14, 2010
I'm planning on setting up a home file server. I was wondering what platform would be recommended for something like this. The server would be used mainly for media storage which would be shared between an HTPC and a couple desktops and laptops. I was thinking of just getting whatever motherboard had the most SATA headers on it (which currently seems to be something P55-based) and setting up a RAID5 fakeraid with some 1.5 or 2TB drives and the OS in RAID1 with whatever drives I have laying around. It there anything flawed with this approach? P55 boards with 10 SATA headers are currently upwards of $200, which is kind of pricey. Is there a more economical route that I should consider? Also, are there any known problems with setting up a fakeraid like this using certain motherboard's SATA controllers?
View 4 Replies
View Related
Aug 24, 2011
My 11.04 installation is running beautifully in VM on ESXi. I'm trying to add storage so I added the disks, assigned them in vmware to the vm, then tried to mount them when I received the error code...
my setup:
HP Microserver, booting vmware from USB drive. Hardware RAID card (Adaptec RAID 2405), 2 x 250GB HDD in RAID1 (datastore1) with VM's, 2 x 2TB HDD in RAID1 (datastore2) - the storage I'm trying to add.
A search of the above errors yielded many results, all of them were different scenarios to mine.
View 8 Replies
View Related
Jul 14, 2011
I trying to create a Cluster Linux with two servers and one storage, I have mounted some filesystems in both servers, but, when I create a file on server (1), I don't see the file on server (2).
Is that a problem with the linux or storage configuration ?.
View 1 Replies
View Related
Jan 18, 2010
I need some advice or tips or maybe your own experiences about building a home data storage or NAS.Here's some thoughts / requirements I think it should have:It should expandable. I'll stick a couple of 1TB HDDs and a little later I'll stick some moreIt should easily integrated to both Ubuntu and Windows 7. Ideally it'll be an integrated part of the filesystem.I'm thinking some sort of RAID as a backing up my data. RAID 1 seems like a such a waste but then again, these days, HDDs are cheap.And when I do add more HDDs, I'd like them to appear as one big storage unit instead of separate drives.Any suggestions and tips on how to go about this is welcome. Questions are plenty: should I go with server hardware or is bigger ATX case and standard hardware enough? I'll need some pointers so keep 'em coming
View 9 Replies
View Related
May 22, 2011
I run Debian on my old computer to use it as a server. Everything is configured properly so that it functions as a web server. Now that summer comes closer I will not be home most of the time and I was thinking to use part of my server to upload/download files. Is there some nice package that provides an easy interface for such a task? I am reffering to something like the wikimedia package but for just downloading/uploading files.
View 6 Replies
View Related
Jun 22, 2011
I'm trying to delete directories (long story, Mac temp files there, Windows not cooperating) on a sever connected to a HP 20 Modular Smart Array set up as RAID5. System currently running Windows. I've booted from a 9.10 LiveCD but can't see the external drives. Is it correct that I need to install mdadm to "see" those drives from LiveCD? From a different machine (linux) I can mount the drive using samba like so:
sudo smbmount //IP address/hostname RAID5 Root Share /mnt/ntserver -o username=smith,password=abcde123
I have admin privileges on the Windows OS. In linux (or Windows beforehand), is it possible to take ownership of the directories so that I can do a rm -f -r <dir> ?
View 6 Replies
View Related
Apr 20, 2011
Can ANYONE point me in the right direction on how to use storage on multiple servers as a single cluster?I thought storage cluster was for that but, after much googling, and even more help from here, I don't think that achieves my goal. My goal is to have multiple servers share a file system, to act as somewhat of a network raid, so if node-A goes down the files are available on other nodes, and hopefully so when the capacity of the nodes are reached I can add nodes to expand the "cluster".
View 6 Replies
View Related
Dec 8, 2010
I have one scsi storage array, JetStor SATA 416S,split into 2 halves. each is RAID5 12TB. Is it possible to dedicate each half to a different rhel5 server. I have "lsi22320-r" ultra230 dual channel scsi adapter in each server.
The first server sees the 2 halfs however the second server doesn't on the first server:
View 2 Replies
View Related
