I get #1030 - Got error 28 from storage engine from mysql while i phpmyadmin, i am able to get info from the database while im on my site.
The disk isnt full so im guesing it could be some user access, but how do i check this?, and fix it?
I need help about the error in my website. I have the following error....
Code:
user warning: Got error 134 from storage engine query: SELECT data, created, headers, expire, serialized FROM cache WHERE cid = 'theme_registry:database1' in /var/www/html/web/includes/cache.inc on line 26.
I'm looking for a simple and reliable search engine for searching particular content on the files in the storage database. The output will display files' name and their path. Google search found following site:- "List of search engines";[URL]..There are many of them. I have no idea how to make my selection. Could you please shed me some light. Furthermore can a simple shell command do the same job?
View 4 Replies View RelatedI've installed Debian twice on my new system and always have mei_me errors and the system doesn't boot. The errors are:
mei_me: HBM haven't started
mei_me: link layer initialization failed
mei_me: init hw failure
mei_me: initialization failed
While it would suggest some sort of hardware problem, this system is working fine with Ubuntu 14.04 & 16.04.
I've installed drivers for Brother HL-1030 printer (LPT port), according to instructions provided in this site,...
[URL]
Although the printer is ok (because it works in other OS like windows) when i try to print a document, the printer gets alive, shows that is receiving data with "data" led and i even see a progress bar showing how the data is being sent but, in the end, data led turns off and the printer does not even load the paper. This are the commands i've used for installing the driver:
ln -s /etc/init.d/cups /etc/init.d/lpd
mkdir /var/spool/lpd
mkdir /var/spool/lpd/HL1030
dpkg -i --force-all hl1030lpr-1.1.2-1.i386.deb
[code]....
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I'm trying to install mysql on Lenny. I managed to get apache and php going just fine but i'm getting this error for mysql at the mo: The following packages have unmet dependencies.
mysql-client: Depends: mysql-client-5.1 but it is not going to be installed
mysql-server: Depends: mysql-server-5.1 but it is not going to be installed
E: Broken packages
I don'thave a cluse how to fix this. I've read that adding a line in sources.
I loaded Avast anti virus into Ubuntu 10.10 this morning. It seemed to go okay and uploaded the updates. But then it stopped. Now when I try to start it I get the following error message. 'An error occurred in avast! engine: Invalid argument'
View 1 Replies View RelatedAt the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:
[root@boris ~]#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
[code]....
hen I change innodb_log_file_size to more than 5mb no php script is working... and I have this strange error in my scripts errror_log
Date: Sun, 10 Jan 2010 15:00:39 +0200
Error Number: 1286
Error: Unknown table engine 'InnoDB'
IP Address: 77.7.246.165
Page: /index.php?showtopic=174868
mySQL query error: SELECT * FROM ibf_topics WHERE tid=174868
I change it in my.cnf than restarted mysql
My PC has an internal combustion engine.Yes, it has.Every morning, when it's cold (at my work place), I start my pc, and it takes a loooong-looooong time for debian etch to boot.And after it started, if I want to open a file / program / folder, it takes more than 2 minutes to open them.After about 10 minutes of PC being ON, everything goes back to normal speed.This started to happen since last winter.If I leave the heat on over night in my room at work, next day when I start my pc it works perfect from the first time.
View 2 Replies View RelatedI'm using debian etch - clamav.clamscan states: >> This version of the ClamAV engine is outdated.<<which is correct, my system is using 0.95.3 in vola you find 0.96
View 2 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have been using Epiphany for about 10 days now. It seems that suddenly my search engine was changed from Google to VirginMedia.I cannot find any option to set the default search engine, either in Epiphany preferences or in gconf-editor.Can anyone explain how this change has occurred or how I might get back to having Google as my default search engine? I am using Debian Lenny 5 and Epiphany 2.22.3
View 5 Replies View RelatedI have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
getting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
I'm trying to install snort-2.8.5.3 on centos5-i386 an I get this error from ./configure --with-mysql --enable-dynamicplugin command:
ERROR: unable to find mysql headers (mysql.h)
checked in the following places
/usr
/usr/include
[Code].....
I've read here it has to do with libmysqlclient12-dev. How can I install libmysqlclient12-dev on centOS?
Is it possible to install snort from repositories using yum?
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I've got an Atom-based EeePC1000 with 2.6.34-0.slh.11-sidux-686.The DebianEeePC wiki ( as the following information.As of kernel 2.6.30, the "Super Hybrid Engine" is supported: /sys/devices/platform/eeepc/cpufv contains a value which is 256× the number of available settings plus the current setting; you write a number n (0 ≤ n < number of available settings) to it to alter the setting.
View 2 Replies View RelatedI am trying to connect to my mysql database using php but I am getting the error "Fatal error: Call to undefined function mysql_connect()".
I checked phpinfo() and there is no reference to MySQL. I believe this means that my install of PHP doesn't support MySQL. Do I need to uninstall and reinstall with a version of PHP with MySQL support? If so how should I do this and how do I get a version of PHP that supports MySQL?
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Need a driver for a Compaq P900 Trinitron monitor, Model PE1030 using Linux Mint 8 Helena. Unable to change resolution. Max is 600 x 400.
View 6 Replies View RelatedI can't get mysql to update from lenny (mysql-5.0) to squeeze (5.1). apt tries to start the server but comes up with some kind of configuration script error.
View 1 Replies View RelatedI took some pictures tonight and plugged in my flash card reader (via usb) as always. Only this time, the device isn't assigned a proper location (like "sdc3").
A little research later and I *think* I need the module "usb-storage", which I can't get to load. It's been a *long* time since I had to mess with modules and I'd like some fresh eyes on what the problem might be.
This is my lsmod output:
Code:
I also ran modprobe with -n -v:
Code:
I have run depmod -a and tried the modprobe again...
Code:
If I drill down to the /lib/modules/<kernel -r>/drivers/usb/storage/ where the .ko file is and say:
Code:
So.... since I haven't changed anything that I can think of since the last time I took pictures...what happened? How do I fix this?
