Hardware :: Installing A Dell 1320cn Laser Printer With Ubuntu 9.10
Feb 4, 2010
Just purchased new del 1320cn printer and unfortunatly ubuntu doesn't see it. I tried the Foomatic system as well, which does see the printer and identifies it but does not show the model number in the list.
Any help would be really good. My other Del 1110 mono laser worked first time!
If any terminal commands reqd, please could you be kind enough to list them as I get confused using terminal.
distro: ubuntu 9.10
Printer: Del 1320cn Colour Laser Printer
Using ubuntu 10.04 a dell 1320 colour laser printer. I have been using a xerox driver for this but it will only printer from the single sheet feeder and no the paper tray. It works fine with XP and windows driver. I know that there is not a dedicated driver for linux but is there one which will work correctly and how do I install it?
I am using slackware 13 and cups is working OK. i installed the printer HP laser jet 1018 USB printer through localhost:631. it seems installed correctly but when i send test print there is no output.2nd thing i want to share that printer to some other windows machine on network so they can also use that printer
I was curious as to if there was a way to install a 32bit driver on a 64bit system. I have a dell v515w printer and the only driver they provide for it is a 32bit driver. I was wandering if anyone may know of a way to install it or if anyone knows of any other available drivers. I have searched everywhere for i dont know how long and came up with nothing i have tried installing the 32bit libraries and it didnt help.. and going back a 32bit system is out of the question due to ubuntu not wanting to load.. i think it has something to due with my hard drive being to large... but im using ubuntu 10.10 maverick 64bit...
I would like to know how to network a HP P1005 Laser Printer that is connect to my desktop with Windows XP SP3 Home, & as well network files & folders to watch it on Ubuntu on my laptop?
I am new to Linux having just recently installed Fedora 10 on my Dell Inspiron 1720. I bought a Lexmark x4975 wireless printer which comes with an installation disk for windows and Mac only. Any ideas how I can install the printer on my linux setup?
I'm looking for a low cost mono laser printer that just works under Ubuntu. I know that a general 'rule of thumb' is go with HP, but that doesn't seem to be the case with their low-end mono printers, as they use the XQX Stream Protocol instead of Postscript. The more expensive HP printers appear to work because they use Postscript.
I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
unable to print to / install / locate Dell P1500 laser
The printing troubleshooter says:
"CUPS service does not appear to be running. to correct this , choose SYSTEM->Administration->Services from the main menu and lookfor the cups service"
unfortunately there is no->Services tag under ->Administration to look for the CUPS Spooler.
running 10.04 64 Bit on a dual boot with vista AMD6000 box Printing is fine on the vista side so the printer and usb connection is fine.
LaserJet Pro CP1525NW. HP website mentions that it is compatible with Linux. However, this particular model cannot be found at Linux Foundation's OpenPrinting Database. As you can see here, there is no mention of HP LaserJet Pro CP1525N which makes me worried. Also, the printer is not listed in HP Linux imaging and printing.
What are your thoughts and do you have experience with this printer? What other Color Laser printer do you recommend? The fact that the that printer's specification on HP website says that it is compatible with Linux, yet it is not listed on HPLIP nor in Openprinting makes me nervious.
I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
Can anyone recommend a reliable network laser printer for a small office (it will be used quite often)Actually, it doesn't have to be laser - what's more efficient?Obviously it has to work well with linux.
I have Fedora 11 and am trying to install Brother HL-2170W Wireless laser printer. I installed it and used CPUS but cannot print. SELinux is enabled. On Brothers site there is an FAQ about SELinux and CUPS. [URL] I followed these instructions but still cannot print. Jobs get queued. Under Printer properties -> Policies, there is an Enabled checked. For some reason when I check this Enabled box and click Apply, the changes do not take effect. Then Enabled checkbox gets uncheck again.
I cannot even print a test page as its status shows Pending.
I have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
Hp P3005 Laser printer gives 49FF04 error message and 50.2 fuser unit problems. I open my printer, It doesn't receive tray paper. If you give this issue information about my broken piece, on fuser film is torn inside,deformed lower sleeved roller Worn bushing. I will buy a company this spare part on I want to fix my own printer.(Please understand my english is not very good show ) Bilberk Printer-Service-Spare parts [Moderator edited to remove advertising link.]
I have tried to mount an HP laser printer on my home network through a VPN IPSES connection from my laptop, but I cannot manage to see the printer or make it accept commands.
I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (
It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)
My system is: Release 7.8 (wheezy) 64-bit Kernel Linux 3.2.0-4-amd64 GNOME 3.4.2 AMD Athlon(tm) II X2 245 Processor × 2
The source code contain the following files: -> pwd /home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1
-> ls -R .: brcupsconfig Copying filter PPD
[Code] ....
How do I compile and install it on my computer ? ( Or get the printer working ? )
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
My dad owns a business and the computer he uses for engraving uses Windows 98 and he wants to upgrade and he likes ubuntu and I want to know how to install an Epilog Laser Engraver model 2000 25a laser!
I have Dell 1545 pre-loaded with Ubuntu 9.04. It has Oracle VM VirtualBox installed, for which I run Ubuntu 10.04. I have downloaded drivers for Ubuntu 10.04 to interface with Lexmark X6650, and can easily print documents from Ubuntu 10.04. However, I cannot figure out how to access the scan function.
Do you know about a driver for Windows Dell AIO A920 Printer in Ubuntu 9.10? I have problems to print through my Linux. The printer is shared by a PC with Windows XP...
