Ubuntu :: Adding Printer Memory To HP 4000 Laser Printer
Mar 16, 2011I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies
ADVERTISEMENT
Ubuntu :: Hp 4000 Network Printer No Longer Detected Still Works In Windows
Mar 8, 2011for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
Ubuntu :: How To Network Laser Printer
Oct 16, 2010I would like to know how to network a HP P1005 Laser Printer that is connect to my desktop with Windows XP SP3 Home, & as well network files & folders to watch it on Ubuntu on my laptop?
View 4 Replies View RelatedUbuntu :: Low Cost Laser Printer That Works Out Of The Box?
May 16, 2010I'm looking for a low cost mono laser printer that just works under Ubuntu. I know that a general 'rule of thumb' is go with HP, but that doesn't seem to be the case with their low-end mono printers, as they use the XQX Stream Protocol instead of Postscript. The more expensive HP printers appear to work because they use Postscript.
View 3 Replies View RelatedUbuntu :: Multifunction Monochromatic Laser Printer For 10.04?
Sep 24, 2010I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
Hardware :: Use Dell 1320 C Laser Printer Ubuntu 10.04
Oct 18, 2010Using ubuntu 10.04 a dell 1320 colour laser printer. I have been using a xerox driver for this but it will only printer from the single sheet feeder and no the paper tray. It works fine with XP and windows driver. I know that there is not a dedicated driver for linux but is there one which will work correctly and how do I install it?
View 1 Replies View RelatedHardware :: Installing HP Laser Jet 1018 USB Printer?
Jun 13, 2011I am using slackware 13 and cups is working OK. i installed the printer HP laser jet 1018 USB printer through localhost:631. it seems installed correctly but when i send test print there is no output.2nd thing i want to share that printer to some other windows machine on network so they can also use that printer
View 2 Replies View RelatedUbuntu :: Laser Printer Pro CP1525nw Capability - Cannot Be Found At Foundation's
Dec 4, 2010LaserJet Pro CP1525NW. HP website mentions that it is compatible with Linux. However, this particular model cannot be found at Linux Foundation's OpenPrinting Database. As you can see here, there is no mention of HP LaserJet Pro CP1525N which makes me worried. Also, the printer is not listed in HP Linux imaging and printing.
What are your thoughts and do you have experience with this printer? What other Color Laser printer do you recommend? The fact that the that printer's specification on HP website says that it is compatible with Linux, yet it is not listed on HPLIP nor in Openprinting makes me nervious.
Hardware :: Installing A Dell 1320cn Laser Printer With Ubuntu 9.10
Feb 4, 2010Just purchased new del 1320cn printer and unfortunatly ubuntu doesn't see it. I tried the Foomatic system as well, which does see the printer and identifies it but does not show the model number in the list.
Any help would be really good. My other Del 1110 mono laser worked first time!
If any terminal commands reqd, please could you be kind enough to list them as I get confused using terminal.
distro: ubuntu 9.10
Printer: Del 1320cn Colour Laser Printer
Red Hat / Fedora :: Canon 3108b Laser Printer Driver ?
Jan 8, 2010I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies View RelatedFedora :: Install HP Laser Jet P1006 Printer For FC14?
Mar 8, 2011i am getting problems in order to install my HP laser jet p1006 printer for FC14.
View 15 Replies View RelatedHardware :: Reliable Network Laser Printer For An Office?
Jan 4, 2010Can anyone recommend a reliable network laser printer for a small office (it will be used quite often)Actually, it doesn't have to be laser - what's more efficient?Obviously it has to work well with linux.
View 2 Replies View RelatedDebian :: Unable To Add Printer: Forbidden When Adding "New Printer"?
Aug 19, 2011I'm installed CUPS:
1. apt-get install cups cups-client hplip
2. /etc/init.d/cups start
3. localhost:631
When I try to add "New Printer" I see the message on the screen:
Unable to add printer: Forbidden
In log file message:
failed to CreateProfile: org.freedesktop.DBus.Error.NoReply:Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
Debian Installation :: When Connect The Printer, Doesn't Recognize Printer As The Photosmart B109 Printer For Unknown Reason?
Jan 3, 2011I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedFedora :: Install Brother HL-2170W Wireless Laser Printer?
Oct 20, 2009I have Fedora 11 and am trying to install Brother HL-2170W Wireless laser printer. I installed it and used CPUS but cannot print. SELinux is enabled. On Brothers site there is an FAQ about SELinux and CUPS. [URL] I followed these instructions but still cannot print. Jobs get queued. Under Printer properties -> Policies, there is an Enabled checked. For some reason when I check this Enabled box and click Apply, the changes do not take effect. Then Enabled checkbox gets uncheck again.
I cannot even print a test page as its status shows Pending.
Fedora :: Canon Lbp3000 Laser Printer - Make It Work Under F14 And F15?
Jun 17, 2011Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.
View 5 Replies View RelatedGeneral :: Installing Printer - Add Printer In Local Network Or Windows Printer Via Samba
Nov 23, 2009I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
OpenSUSE Hardware :: 11.2 64bit - Brother HL 3040CN Laser Printer Compatibility
Jul 5, 2010I have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
View 3 Replies View RelatedSoftware :: CUPS No Longer Printing With Brother HL2170W Laser Printer
Jun 25, 2011I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
CentOS 5 Hardware :: Hp P3005 Laser Printer Gives Me 49FF04 And Fuser Error
Aug 11, 2010Hp P3005 Laser printer gives 49FF04 error message and 50.2 fuser unit problems. I open my printer, It doesn't receive tray paper. If you give this issue information about my broken piece, on fuser film is torn inside,deformed lower sleeved roller Worn bushing. I will buy a company this spare part on I want to fix my own printer.(Please understand my english is not very good show ) Bilberk Printer-Service-Spare parts [Moderator edited to remove advertising link.]
View 1 Replies View RelatedUbuntu Networking :: Mount An HP Laser Printer On Home Network Through A VPN IPSES Connection From Laptop?
Dec 12, 2010I have tried to mount an HP laser printer on my home network through a VPN IPSES connection from my laptop, but I cannot manage to see the printer or make it accept commands.
View 1 Replies View RelatedDebian Hardware :: Compile Driver For Laser Printer Brother HL1110 For AMD64
Mar 31, 2015I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (
It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)
My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2
The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1
-> ls -R
.:
brcupsconfig Copying filter PPD
[Code] ....
How do I compile and install it on my computer ? ( Or get the printer working ? )
General :: Print Data To Laser Printer Using An Overlay Form And Save File As Pdf?
Jun 5, 2010i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies View RelatedGeneral :: Doesnt Recognise My Floppy Drive - Cant Install My Printer A Samsung ML4500 Laser
Dec 24, 2010I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
Ubuntu :: Adding A New Printer?
Jun 17, 2010I am trying to install a printer, an Epson Lx-300 II. I go to System>Administration>Printing and select a New printer. No printer is automatically detected, so I select Epson Dot Matrix from the list (as the LX-300 II model is not listed). This is ok, and it prints however it prints weirds letters.
View 2 Replies View RelatedGeneral :: Adding Windows Printer In Ubuntu System?
Feb 15, 2010I need to add those in my ubuntu system so that i can do printing from remote machine. so what i m doing is System-administation-printing then m clicking on the desired share then after when i click on verify its asking me for username and password. So just confirm me one thing do i need to add my username to windows machine, apart from that i also need to do any changes in samba config files.
View 3 Replies View RelatedCentOS 5 :: Lost Network After Adding Printer Server?
Sep 2, 2010I installed CentOS 5.5 on my Compaq desktop PC connected to a LAN/Router, at the installation somehow the LAN connection was automatically determined and I was able to use the browser without doing anything.However when I added a print server to the LAN/Router I lost network connection from my Compaq PC running CentOS 5.5. Is there a way to rerun network manager installation to determine the new LAN settings (with a print server attached)
View 7 Replies View RelatedUbuntu :: Root Admin - Loading The Printer Drivers For New Lexmark Printer
Jul 6, 2010Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedUbuntu Networking :: Can't Locate Printer Drivers In Network Printer Setup?
Oct 19, 2010I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
Ubuntu :: 'Add Printer' Missing When Running System-config-printer
Aug 1, 2010I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies View Related