Debian Hardware :: Can't Enable Glamor Acceleration On Intel Card
Nov 10, 2015
I try enable "glamor" acceleration" instead of SNA on my system (Debian Stretch KDE) ..but for me doesn't works.
My graphics cards:
Code: Select all $ inxi -Gx
Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
Card-2: NVIDIA GM108M [GeForce 930M] bus-ID: 01:00.0
Display Server: X.Org 1.17.3 driver: intel Resolution: 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 11.0.4 Direct Rendering: Yes
View 2 Replies
ADVERTISEMENT
Apr 18, 2010
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
View 6 Replies
View Related
Mar 9, 2011
Running Squeeze, with kernel 2.6.32-5-amd64. I do not find out how to enable 3d acceleration with my Intel 945 embedded graphics card. Also having very (i mean VERY) slow scrolling in some webpages (such as apple website, or danielestulin.com website). I tested the following "Hardware Acceleration Stress Test" with Epiphany, Iceweasel and Firefox, and the best rate I get is only 3 fps...[URL].. I tested the Chess game included with default Squeeze install, running in 3d mode, and definetely there is no acceleration at all...
Here's my glxinfo output:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
[Code]...
View 13 Replies
View Related
Jun 7, 2010
I installed new ati radeon drivers in the morning because i was getting display/screen deformation when using some programs (like vertical lines and so on). Now everything is just fine but i can't get 3d accelerator to work and due to this some games are running very slow. I am a new linux user. I have done everything i know and searched this from the internet but i can't get 3d acc. to work again. i have installed new drivers over the old ones (or i don't know; mesa?)
[code]...
View 4 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
Sep 5, 2015
I'm running hardware already considered legacy and I was made painfully aware that those drivers, for ATI cards, are only available from Jessie repositories; yet, somehow I was able to have my system configured to run not the stock drivers the system used for installation but, allegedly, proprietary drivers.
I did notice an overall improvement on how the system displays everything on the screen but after fumbling around the system trying to install a game I had a message warning that only software acceleration was activated and not full hardware acceleration, which was what I was aiming at.
After going through a lot of guides on the web I was able to:
a) discover the system is running MESA drivers (or so I have understood)
b) install headers for my system but somehow along the way I fumbled whatever I was doing and I probably now have a lot of loose ends in the system
Being Debian (and rock solid) the system is still running smoothly but I really want to clean up after myself and correct what I can and improve where is possible.
View 3 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jun 4, 2010
When I was 12 fedora with graphics acceleration worked well and without problems but now I installed fedora 13 dvd compatible with everything when I installed it and no problem only in go to System> Preferences> Desktop Effects I came with a message.
Code:
3D graphics acceleration not available. Desktop effects require hardware support for 3D. I was surprised what I came out.
And try to end with the console
Code:
But most disappointing is that I do not use Nvidia, ATi, Intel only: / will get more info put this command and I miss it.
Code:
View 1 Replies
View Related
Jan 11, 2011
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
View 1 Replies
View Related
Sep 10, 2011
I can't enable 3d acceleration because when I enable the Desktop effects, and I exit the window, they are not active.. I enter in the desktop effects configuration again, and I can see that the option "enable" is uncheck.. I'm a newbie.. Can you explain me how do I get the driver for my Nvidia GeForce 9600M GT (512 MB of Graphic RAM)? Do I have enough power to run 3d?
View 5 Replies
View Related
Jul 6, 2010
I have a ATI Technologies Inc RV530 [Radeon X1600] Card which used to work fine under Squeeze until some weeks ago, after an update in didn't anymore and since I wanted to install to Lenny anyway and did a clean install of Lenny and now the card hardware acceleration doens't work. I followed url.
Since I am using a backports kernel I installed firmware-linux-nonfree from lenny-backports.
% uname -r
2.6.32-bpo.5-amd64
% lspci -v | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600] (prog-if 00 [VGA controller])
xorg.conf
Section "Device"
Identifier "Device0"
Driver "radeon"
EndSection
code....
View 8 Replies
View Related
Aug 17, 2011
i'm currently running Ubuntu 11.04.Heres my problem. Everytime i try to run Compiz and apply some of the fantastic effects none of them seem to work. So this tells me that something is either wrong with my graphics driver (because upon a clean install of Ubuntu it says i don't have a graphics card that can supoort Unity) or i've just simply missed a step in adding one.I've checked Nvidia X server only to get the message "You do not appear to be using the NVIDIA X driver Please edit your x configuration file (just run `nvidia-xconfig as root)" I would love to run it in root if (and don't laugh) i only knew how :
From the many commands i've found online i've tired to either get to or find xorg.conf and if i'm mistaken doesn't exist for some reason. In a nutshell. I can't enable 3d acceleration, i can't find xorg.conf.I currently have 325m Nvidia card on my laptop, if it helps : I can give a ton of other information in necessary.
View 9 Replies
View Related
Mar 8, 2010
I'm trying to get full 3D acceleration working with an Intel 82865G Integrated Graphics chipset on my Arch install. I'm wondering if it's possible to get it to work with xf86-video-intel, as I can't seem to get the Intel-provided drivers to compile. As also stated, I have to xorg.conf to speak of, so I can't exactly go in and simple edit lines, unless I wrote it from scratch, which I'd really rather not do, LOL. I've tried Google (including their special Linux search mode), and LQ Search, and I can't seem to find information that's relevant enough to me that I can use. Here's glxinfo (only the (hopefully) relevant portions):
Code:
[root@archie mrcode]# glxinfo | grep -i "direct rendering"
direct rendering: Yes
[root@archie mrcode]# glxinfo | grep -i "renderer"
[code]...
View 13 Replies
View Related
Apr 6, 2010
I'm using Ubuntu 9.10 (Karmic Koala) & recently added Ubuntu Studio to it. For quite some time, I'm trying to enable direct 3d acceleration on a virtual XP SP3 machine running over VMware Workststion 7.0.1.
As per VMware forums & many other sites, 3d hardware acceleration is supported for XP as guest provided that host Linux version is supported by the VMware product running that VM.
The forum also says that Ubuntu 9.10 is now supported by Workstation 7.0.1.
So: I have a supported version of host (Ubuntu 9.10) XPSP3 as guest. Latest version of VMware tools installed. Still I don't get hardware acceleration for the guest XP VM.
View 3 Replies
View Related
Jul 27, 2010
I am trying to figure out how to enable 2d/3d hardware acceleration, but I really don't know how.I have the proprietary ati (fglrx) driver.
View 3 Replies
View Related
Nov 12, 2010
I have an HP laptop with an ATI 4300 HD built-in. When I play avi/divx video in fullscreen, this is kinda choppy sometimes. I use the ATI proprietary driver: How do I enable hardware video acceleration for this driver?
View 5 Replies
View Related
Mar 4, 2010
opensuse v11.2, linux 2.6.31.12-0.1-desktop x86_64
ati radeon hd3200 (built into motherboard)
gnome desktop
The video acceleration is clearly not enabled since I can practically watch each pixel drawn. (Well, a bit hyperbolic, but really slow.) Another system, same hardware, had this slow video problem and at one point required a complete OS re-installation. The slow video refresh went away. So there is some way to configure the graphics+display to enable acceleration at install time.
View 4 Replies
View Related
Apr 30, 2011
Moving from 10.10 to 11.04 on i3-530 IGP. Launching VMware and opening any virtual machine results in the VMware window opening and quickly vanishing. The VMware process is still running without any display.VMware runs on 10.10 but without any hardware acceleration.How can I get VMware to run, and how do I enable hardware acceleration?
View 3 Replies
View Related
Aug 3, 2010
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
View 5 Replies
View Related
Sep 13, 2015
I have an intel 7265 AC wireless card. When I try to download something my estimated download time is tripled almost every 5 mins.And when I play an online game from steam (cs:go or dota2) the ping goes to 250-300 ms which generally stays around 80ms. I'm using debian jessie. So far, I've tried turning of the power save mode of the card, changing ISP and router but none of them worked. I have a fairly good internet connection (I'm using it with my other machines without a problem) so I don't think the connection or router is the problem. Below you can find some information about system.
Code: Select all$ lspci | grep Network
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
Code: Select all$ dmesg | grep iwlwifi
[Â Â 9.236494] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[Â Â 9.750780] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
[Â Â 9.750971] iwlwifi 0000:03:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
[Â Â 9.896465] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[Â Â 9.896516] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[code]....
Those are the outputs of the commands I know.
View 10 Replies
View Related
Sep 15, 2014
I'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[Â Â 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
View 3 Replies
View Related
Mar 9, 2015
I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.
View 3 Replies
View Related
Mar 7, 2014
I tried to install the latest stable version of Debian (download yesterday : Debian Wheezy 7.4.0) on my new computer Fujitsu Celsius W530.The version installed is exactly this one (given by the commande "uname -a") :
PCNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
=> A Debian Wheezy 64 bit
I have a problem with the Intel ethernet card : I217-LM (the model was verified on the Fujitsu specifications and also on the Windows 8 I use on another partition).During the install procedure, Debian did not find the ethernet card.I continued the install without it and after I tried to make it found.I got a Linux driver in the Intel Web Site but I saw after that Debian loaded yet this driver (e1000e), so I did not install the driver from Intel (I needed to get linux-headers and to compil the files).
So when I force the system to load the driver, it gives no error but the device is still not found when I try to bringup the network interface.URL...
- understand why I see the Device (with "lspci" command) and the module "e1000e" (I tried also the "e1000" one) loaded with "lsmod" command ?
- make the card work to allow my debian for connecting to internet ?
Here some commands which can show you the problem :
Code: Select all~# lsmod | grep e1000
e1000e        120822 0
root@PC-DEV-JB-debian:~# ll /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
-rw-r--r-- 1 root root 184K févr. 2 02:04 /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
[code]....
View 5 Replies
View Related
Jul 20, 2010
I bought a Mini ITX motherboard Intel DH57JG bu the installation DEBIAN does not recognize the ethernet card.
View 9 Replies
View Related
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
View 1 Replies
View Related
Jun 22, 2011
The system has driver for intel, but the opengl version is 2.1. How to update opengl version to 4.1. (intel 945). For ATI just download driver version 11.5 and install it. All is OK.
View 1 Replies
View Related
Mar 2, 2010
I like Linux.
I like OpenGL.
I don't like X.
On Linux, is there anyway to get 3D acceleration from my Nvidia card without X? Ideally, I'd have the kernel boot, get to a console, then somehow get into a "graphics mode", where my entire monitor is just a single OpenGL screen ... and I draw stuff to it with OpenGL. Without X.
View 4 Replies
View Related
Nov 6, 2010
I'm having problems with my video card (Radeon X1600) ever since I upgraded to 10.04 (video is fine until I stress the video card (eg using 3D acceleration)). This appears to be a problem with the drivers for the video card. I've had problems in the past with video cards (many because I didn't check that the card I'm buying is "Linux friendly" or not. Now I'm doing my do diligence and asking the community what video card I should buy to replace my current one? I have the following Motherboard: [URL]
View 9 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line). I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 1 Replies
View Related
Mar 18, 2011
I have crunchbang statler xfce installed on my netbook. And everything used to work (with some work arounds for somethings) till i updated the system last week, and now i dont have hardware acceleration. When i run glxinfo as user i get the error segmentation fault, but as root everything seems to be okey. /var/log/xorg.0.log shows that the intel driver is loaded normaly. So this looks to me that i might not be in the right group. But grep video /etc/group gives as output: video:x:44:mardo
I even tried chancing the the DRI group to mardo in the xorg.conf without sucses
Code:
Section "DRI"
Group "mardo"
Mode 0666
EndSection
Code:
mardo@crunchbang-netbook:~$ ls -l /dev/dri/card0
crw-rw-rw-+ 1 root mardo 226, 0 Mar 19 11:33 /dev/dri/card0
View 4 Replies
View Related
