Debian Hardware :: Ethernet Card Intel I217-LM Not Recognized By Wheezy
Mar 7, 2014
I tried to install the latest stable version of Debian (download yesterday : Debian Wheezy 7.4.0) on my new computer Fujitsu Celsius W530.The version installed is exactly this one (given by the commande "uname -a") :
PCNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
=> A Debian Wheezy 64 bit
I have a problem with the Intel ethernet card : I217-LM (the model was verified on the Fujitsu specifications and also on the Windows 8 I use on another partition).During the install procedure, Debian did not find the ethernet card.I continued the install without it and after I tried to make it found.I got a Linux driver in the Intel Web Site but I saw after that Debian loaded yet this driver (e1000e), so I did not install the driver from Intel (I needed to get linux-headers and to compil the files).
So when I force the system to load the driver, it gives no error but the device is still not found when I try to bringup the network interface.URL...
- understand why I see the Device (with "lspci" command) and the module "e1000e" (I tried also the "e1000" one) loaded with "lsmod" command ?
- make the card work to allow my debian for connecting to internet ?
Here some commands which can show you the problem :
Code: Select all~# lsmod | grep e1000
e1000e 120822 0
root@PC-DEV-JB-debian:~# ll /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
-rw-r--r-- 1 root root 184K févr. 2 02:04 /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
I just bought a new server with one of the most recent v3 Intel processors (socket LGA1150). The board (Supermicro X10SLM-F) uses the new Intel NICs (i217LM + i210AT), not supported by the current Debian stable release. Hence, the ethernet adapter is not recognized during the installation process.
I would like to be able to install something as close to stable as possible in a production server such as this one.
i can't install debian 5 in my emachines G725 notebook, the ethernet card is not recognized, it's name: Atheros AR8132 PCI-E Fast Ethernet Controller .
I'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing : Code: Select all$ grep EE /var/log/Xorg.0.log [ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux (~)$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
I am running the commands as ROOT. I also tried: setserial /dev/ttyS3 irq 3 uart 16550A skip_test but I am getting the same stty: /dev/ttyS3: Input/output error
Output of:
Code: Select alldmesg | grep tty
Code: Select all[ 0.000000] console [tty0] enabled [ 0.952559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.953593] 0000:00:1e.3: ttyS1 at MMIO 0xd0810000 (irq = 19, base_baud = 2764800) is a 16550A [ 0.954072] 0000:00:1e.4: ttyS2 at MMIO 0xd080e000 (irq = 19, base_baud = 2764800) is a 16550A [ 27.740208] ttyS2 - failed to request DMA
[Code] .....
lsof /dev/ttyS3 doesn't return anything so it means there is nothing connected to ttyS3 I guess but I am not very skilled with linux so I might be mistaken
Why I can see 4 ttyS* in my Linux but physically I have only 2 physical Serial Ports on the board?
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
Go to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/" and delete the e1000e.ko-file
Then download [URL]
Take the newly downloaded e1000e.ko-file and move it to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/"
And finally load the module with either: "# modprobe e1000e" or "# insmod e1000e".
You should now have a working ethernet connection.
If connection is lost on system restart try rmmod e1000e; modprobe e1000e
I've for the first time installed linux (debian) to my computer. And I have a problem with ethernet that I can't solve.
I have a Asus Sabertooth P67 motherboard with built in ethernet card, I cant find any drivers for linux, I've tried google, Asus support page etc, but can't anything that says it will work with my computer, just a alot of windows drivers.
where I can find the drivers? Or if there's another way to solve the problem. When installing Debian i could choose between different drivers but no one worked, I've also tried with my motherboard CD but there was just windows drivers...
Where should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
Has anyone had any luck in trying to install wheezy (latest testing snapshot available) on any system with either a AMD/ATI 68xx or 69xx card?All goes well in the install, but on reboot, all that is seen is a "_" and no text, and it hard locks.I am pretty sure this is a conflict with the video card drivers that get installed by default (and which should be blacklisted), but I have no idea how to fix it.The recovery mode don't work either, it is the same "_" with no text, and it ends up hard locking. There is no chance at getting access to a console at all.
I recently installed the XFCE spin of Debian (amd64) on my Lenovo L440. I tried installing it before, but apparently the 3.2 kernel that ships with Wheezy doesn't properly support the proprietary firmware for the wireless card, blah blah. So I wound up using Windows 8.1 for a bit, and then Fedora (boo). Anyway, with the wheezy-backports kernel (3.16.7-ckt4-3~bpo70+1) everything works like a charm. Everything, that is, apart from the sound card — the entire system is completely mute. Well, apart from the system beeper. I searched the forum and found another thread, but that guy was (for some reason) just running dwm — I figured XFCE might feature a more complete sound system. But maybe the output he gave will be useful in my case as well:
I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
I've got a problem on my Debian, I've tried installing all the correct alsa packages and all packages that have the word sound or audio description. The problem that is happening here is that when I go into settings and click on sound in Gnome, it appears to have a dummy output and in fact, a few weeks ago, the sound was working properly. Now, I believe, that after an update, the sound card was not recognized. Used the lspci command in root mode, and showed my sound card which is onboard. I'll leave the model below it, because I've tried everything and could not solve anything.
Code: Select allroot@debian:/home/weiller# lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.
However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).
Then I found this: URL.., but I was expecting more of a download than the source code itself.
I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.
I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.
I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?
I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.
I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.
i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?
Just turned on my computer after being away for a month and I am unable to browse the web when connected using my ethernet card.Skype is able to work fine and I am able to ping my router yet both Iceweasel and Chrome are unable to connect to any websites. Apt-get did not work as well, and Chrome states that there is an error with the DNS lookup, which lead me to try:
# /etc/init.d/nscd restart
yet it didn't work. I am able to browse the web normally when connected using the wireless card.
I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works) DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
I have an intel 7265 AC wireless card. When I try to download something my estimated download time is tripled almost every 5 mins.And when I play an online game from steam (cs:go or dota2) the ping goes to 250-300 ms which generally stays around 80ms. I'm using debian jessie. So far, I've tried turning of the power save mode of the card, changing ISP and router but none of them worked. I have a fairly good internet connection (I'm using it with my other machines without a problem) so I don't think the connection or router is the problem. Below you can find some information about system.
This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
