Debian Hardware :: CNX5069 FIX - Speaker Not Muted After Headphone Plugged In
Jan 24, 2011
The system is squeeze amd64 and a toshiba tc655 notebook. Some relevant info:
$ lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
$ lsmod | grep ^snd_hda_intel
snd_hda_intel 20019 1
$ head -n 1 /proc/asound/card0/codec#0
Codec: Conexant ID 5069
My first idea was to try some different model names when loading the snd_hda_intel module, but after checking the alsa documentation unfortunately i didn't found this particular codec in it. Then after a few hours of lmgtfy.com sessions came the enlightenment. I found something interesting which actually turned out to fix this problem. Here it is: [URL].
View 1 Replies
ADVERTISEMENT
Jul 28, 2011
My only glitch with Ubuntu, which runs flawlessly on this beast, otherwise.I have spent more than 50 hours on this problem. In my case, inserting headphone jack doesn't mute internal speakers. There is sound in the headphone though.alsamixer ot gnome-alsamixer doesn't even show the headphone option. So I cannot change their values.I have tried model= various options, with no avail.I have uploaded my information to alsa projct and the link is: http://www.alsa-project.org/db/?f=18...788fc1458ff422
View 1 Replies
View Related
Aug 16, 2011
I have a netbook running squeeze + lxde. Every time I boot, I have to open alsamixer and turn on my speaker channel. Master and PCM are both enabled and at 100%, as is everything relating to the mic. Speaker just refuses to work with me though.
View 3 Replies
View Related
Jul 26, 2010
I am using Dell Vostro 1520 with Debian Lenny installed. My problem is that I am getting sound through both my headphone and laptop speakers. But it works fine in Windows XP.
Details of my audio device obtained from lshw is... code...
View 2 Replies
View Related
May 20, 2010
There`s no sound in headphone jack, if I plug a headphone nothing happens, the speaker doesn`t stop. BUT if i boot slack with the headphone plugged the opposite happens, the heaphone works but if i unplug it no sound come out from speakers.
[Code]...
After all that the problem continues the same. I`ve read that the alsa-driver comes with the kernel, so I have to install a knew one to get the last alsa-driver? Or just install like I did works?
View 2 Replies
View Related
Jun 25, 2010
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
View 9 Replies
View Related
Sep 23, 2010
I'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
[Code]...
View 9 Replies
View Related
Dec 19, 2010
when I plug headphones into my computer, sound comes out through both the headphones and the computer's speakers. Is there a way to disable the speakers when headphone are plugged in, or even disable them altogether?
View 1 Replies
View Related
Jun 3, 2010
I'm running 10.04 on a Fujitsu Siemens Amilo Pi 1505 laptop. Normally, when I plug my headphones in, all sound is diverted to them. I haven't found anything in sound preferences that changes this.(Under Sound Preferences, Output tab, there's a dropdown called Connector.It has options: "Analog Heaphones", "Analog Output" and "Analog Speakers" but they don't seem to make a difference.) I'd like to leave my headphones plugged in all day and setup my machine to play all sounds through my speakers (including Skype ringing), except Skype calls, which should play through my headphones. Skype has a feature to split the ringing and call sounds, i.e. play them on different devices, but the only option in each dropdown is "PulseAudio Server (local)".
View 1 Replies
View Related
Aug 24, 2010
Both the speakers and the headphones keep playing the sound with headphone plugged in.
View 1 Replies
View Related
Mar 25, 2010
I have the issue that the right channel is nearly to be muted (very low gain, high distortions).
This is my scenario now:
cat /proc/version
Linux version 2.6.30-spalsh (2.6.30) (root@angel3) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Mon Dec 14 22:03:13 CET 2009
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
grep Codec /proc/asound/card0/codec#0
Codec: Realtek ALC883
I am using alsa driver snd-hda-intel
View 2 Replies
View Related
Dec 7, 2010
I am using debian lenny. I have a problem with my headphone,its not working,but sound out from my speakes.
I checked for "alsa oss" installations.linux base sound system is there.
View 2 Replies
View Related
Jun 21, 2009
In the current release of Debian, is there a reason that I can only hear sound through one speaker. With any other distro, the sound can be heard through both.
View 3 Replies
View Related
Jul 12, 2010
I don't know why this happened, but now I can barely hear any sounds using my headphone. I haven't changed any of the alsa settings. Speakers work fine, very fine!
View 4 Replies
View Related
May 11, 2011
I'm a new user of "Debian Squeeze", using the testing repositories, and it's de first time that I post in this forum. I'm very happy to become a member of Debian comunity. Well, I want to change the "beep" sound of the internal speaker to another sound. I mean to any sound on my external speakers. I've searched about it but I haven't found anything useful.
View 1 Replies
View Related
Jun 20, 2011
My audio is working, but when i put my usb speaker in it, it doesnt redirect sound to the speaker, just continues to play from the laptop.
In gnome, System->Prefernence->Sound shows the following:
Device: HDA ATI SB
Device: Logitech USB speaker (Alsa Mixer)
lsusb shows:
Bus 002 Device 003: ID 046d:0a04 Logitech, Inc. V20 portable speakers (USB powered)
dmesg shows:
[ 1530.060050] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 1530.229080] usb 2-1: New USB device found, idVendor=046d, idProduct=0a04
[Code]....
my usb speaker has volume control-up/down, mute, that seems to work, just no sound coming out of it. I am running Squeeze 6.01, kernel 2.6.32-5-686 Also I have 2 computers with squeeze 6.01 installed, both doesnt output usb sound, but the speaker works fine with winXp and ubuntu.
View 1 Replies
View Related
Aug 26, 2011
My headphone jacks, both of them, do not work. When I plug headphones into either of them, the speakers cut out but no sound comes into the headphones.They work fine with my G1 phone so I know they aren't the problem. I had a different issue and was running 2.32.5blah-blah for a while and thought that was the problem.I'm on unstable -- if someone can tell me how to emit my kernel version I can c/p it into here but I'm a n00b. It's 3.0.something (remembered from the grub menu).
View 6 Replies
View Related
Apr 6, 2011
I have a Fujitsu Siemans Amilo A1630 installed with squeeze and am having problems making the headphone jack work with ALSA, there is no sound from this port and jack auto-detect does not work. All drivers are present and correct and necessary modules for my sound device appear to be loading properly, the device seems fully functional except for headphones.
View 6 Replies
View Related
May 27, 2011
I was trying to make my surround sound work and screwed things up. Anyways, one of them is the one with the vertical slider and the other one is the one with the horizontal slider. I want to get rid of the one with the vertical slider. How do I do this? (The one with the vertical slider is in the part where the "tray-ed" programs go). When I use my keyboard volume up and volume down buttons, I notice that the two controls respond APPROXIMATELY the same where one is slightly ahead of the other. If more information is needed, just ask.
View 5 Replies
View Related
Jan 27, 2016
I'm running Debian Jessie 8.2. I have a bluetooth USB dongle connected to my machine.
I run `sudo bluetoothctl -a` then do the following:
Code: Select all [NEW] Controller 5C:F3:70:6B:57:60 debian [default]
Agent registered
[bluetooth]# scan on
Discovery started
[CHG] Controller 5C:F3:70:6B:57:60 Discovering: yes
[bluetooth]# devices
[Code] ....
But I *can* connect to my iPhone this way. Why can't I connect to my Bose Mini II SoundLink speaker?
View 0 Replies
View Related
Jul 26, 2010
I am using Dell Vostro 1520 with Debian Lenny installed. My problem is that I am getting sound through both my headphone and laptop speakers. But it works fine in Windows XP.
View 12 Replies
View Related
Aug 23, 2011
I have a Acer emachine E732z laptop. I have installed debian squeeze gnome, but it is unable to play audio through laptop speaker. The (3.5mm)audio jack is working fine and I can play audio through it. I have also installed Linux mint, but no audio(in speaker and audio jack). There is no such problem in Windows7.
View 1 Replies
View Related
Jul 27, 2010
I have got a Creative X-fi gamer card. I have Creative 4.1 speakers. One of the front speaker doesn't work and I use one front and two rear and of course one subwoofer.
In Gnome, it works after I do few commands and all is well. But, in any other desktop environment only the front one speaker works and the rear two don't. Neither in KDE nor in XFCE or LXDE.
I am tearing my hairs on this. And it is indeed the same with other distributions.
Is it because now it has become actually 3.1 and channelling is not happening. But in Gnome they work.
View 3 Replies
View Related
Nov 13, 2015
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 Replies
View Related
Apr 3, 2015
My laptop's (Acer Travelmate P243-M-6456) headphone jack had been working fine, and has no issues when booted into Windows, but it suddenly stopped working.
I've gone through alsamixer, and the volume is up, and nothing seems to be muted, and I've tried to do everything I could throughout the sound options in the Gnome System Settings.
Here is my ALSA information script output : [URL] .....
View 0 Replies
View Related
Jan 13, 2016
Just installed sid on a new system and I'm having a problem with pulseaudio.I have a motherboard with built-in Realtek audio, and the system should use that for everything except the system bell, which goes through the internal PC speaker that's connected to the motherboard.It works that way on the console. If I type C-g in Emacs, the pc speaker beeps, same with bash completion etc, while aplay will play wav files through the external speakers connected to the sound card. It's perfect.
Now in X, pulse doesn't know what to do. It defaults to the external sound card speakers, so they play all "normal" sounds (like music files) but when I type C-g in Emacs, there's a drip sound that comes out of the speakers. The internal PC speaker doesn't beep at all.I'm using GNOME 3, and I like it, so I can't just purge pulse because it wants to take GNOME with it. If I go to setup > sound, "Line Out - Built-in Audio" is selected, but I have another option for "Analog Output - pcsp" ... that's the snd_pcsp module for the internal speaker. If I select that, it plays the same sound files but through the internal speaker. So when I do C-g in emacs, the beep does come from the internal speaker, but it's not the normal beep you hear in the console -- it's actually the same ogg (or wav or whatever) file that makes the drip sound from the speakers! And worse, if I sleect the pcsp option in setup, it uses the internal speaker for EVERYTHING - including playing audio music files, watching YouTube, whatever! And naturally the sound is very horrible and fuzzy.
Is there any way to tell pulse that I want to use my motherboard's soundcard for everything but the beep, just like in the console?
View 7 Replies
View Related
May 10, 2011
I have a Toshiba Satellite L650 with a Conexant 5069 sound card, and when I plug in my headphones the built-in speakers don't mute. I already tried adding options snd-hda-intel model=lenovo to /etc/modprobe.d/alsa-base.conf (I also tried auto, toshiba, thinkpad and ideapad). This is the alsactl init output:
Unknown hardware: "HDA-Intel" "Conexant ID 5069" "HDA:14f15069,1179fd12,00100302" "0x1179" "0xff1e"
Hardware is initialized using a guess method.
View 5 Replies
View Related
Mar 11, 2011
I just installed Debian Squeeze on my Acer Aspire 7736ZG and I also got some problems with the Realtek ALC888 onboard-sound. Normally, the speakers should mute themselves when headphones are plugged in, but they don't. Instead I hear sound on both, speakers and headphones.
I already installed pulseaudio, but that didn't help. On Ubuntu Maverick (11.01?) I had the problems that the sound didn't play at all until I installed an alsa-driver which was modified by one of the ubuntu developers. Is there any fix like this for Debian Squeeze, too?
View 4 Replies
View Related
Apr 21, 2011
Running Debian Squeeze 64-bit
$ lspci -v
View 4 Replies
View Related
Jul 9, 2011
I have a debian-powered NAS (Buffalo LinkStation) and I want to configure the following behaviour: When ethernet (eth0) is plugged in, connect and get a static ip address (ie. 192.168.0.11) When a wireless usb-adapter (wlan0) is plugged in, connect to a wireless router (ie. "Ankkanet") get another static ip address (192.168.0.12)
My /etc/network/interfaces :
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[code]....
what could be causing wireless to disconnect when ethernet cable is unplugged?
View 3 Replies
View Related
