Debian Configuration :: Low Resolution Graphics
Jun 24, 2015
I installed a GIMP plugin (David's batch processor gimp) and a lot of packages got updated in the process.
The monitor resolution dropped significantly and going to applications -> system tools -> preferences -> settings -> display gives me the message 'could not get screen information' my webcam and microphone is not recognized anymore either ALT + TAB does not change between open windows. power off does not work. I have to shutdown the system using the command line.
The GUI has changed a lot as well. new color schemes (that I don't really like) file system manager has a completely new look too.
it is very strange. My GRUB screen is still in the old resolution. when the system boots up at some point the resolution changes to the lower resolution.
debian version
Code: Select allwim@debian7vaio15:~$ lsb_release -da
No LSB modules are available.
Distributor ID:Â Â Debian
Description:Â Â Debian GNU/Linux 8.1 (jessie)
Release:Â Â 8.1
Codename:Â Â jessie
[CODE]..
View 2 Replies
ADVERTISEMENT
Jun 23, 2010
I'm using squeeze. I wanted to know how you could determine from the command line in tty1 (or tty2 through tty6) what the resolution was that text was being displayed at. Is there a way? I know that in grub, you're supposed to be able to go to the command line and type vbeinfo. I tried this and got some information, but somehow I think it doesn't always apply to the terminal after the computer has booted up.
View 2 Replies
View Related
Aug 13, 2010
I've been having this problem for a long time now. It started suddenly and without apparent cause. 3D games won't work. At first I tried to play OpenArena, and it didn't work, the graphics went terribly slow and choppy, videos were not continious, but rather a succession of pictures of movement. I tried installing and re installing the game several times, but nothing... Now, I'm trying to run hedgewars (the re-make of worms) and it doesn't crash or anything, but the graphics are too slow and choppy again. This is the output from the terminal:
[Code]...
The 'there is no soundcard' message is scary... I have been having sound problems lately, where sounds just stops working in all applications, and only restarting the system will bring sound back. So as you can see my audio and video seem to be on the wrong track. But I don't know how to diagnose the disease... by the way. I installed hedgewars from squeeze though I have lenny. I added the squeeze line to sources.list.and then apt-get-ed it. Is that OK?
View 3 Replies
View Related
Mar 28, 2011
I keep failing at properly configuring my frame buffer.My laptop screen has a resolution of 1440 x 900, so I want 0x036b throughout the whole boot process.However, with my present configuration I have 1440x900 in the grub2 menu and the subsequent 2 seconds, while it displays "Loading Linux 2.6.32-5-amd64"(I reckon this still belongs to grub).
View 7 Replies
View Related
Aug 1, 2010
Enabling kernel modesetting on my computer breaks graphics, but Xorg.log and syslog don't tell me much, because they don't log any error.
The symptoms are the following: boot goes on normally, then the KDM login screen is corrupted. On the login screen there is a big square instead of the cursor, and that square does move as I move the mouse. If I press Ctrl+Alt+F1 I'll get a black screen instead of the terminal, and from there I cannot go back to virtual terminal 7 for login. The only thing I can do is to issue sys-requests for read-only remount and reboot.
Where could I start looking for the problem? What does it seem to be related to, Xorg, kernel, radeon driver?
View 3 Replies
View Related
May 6, 2011
The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies
View Related
Aug 15, 2011
I am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?
[Code]...
View 12 Replies
View Related
Aug 22, 2011
I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
View 5 Replies
View Related
Jul 4, 2010
I'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?
View 5 Replies
View Related
Apr 16, 2011
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
View 5 Replies
View Related
Jul 26, 2015
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
  1024x768   61.00*
  800x600    61.00Â
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [Â Â 15.510099] nouveau ![Â DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510148] nouveau E[Â DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510191] nouveau E[Â Â Â DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
View 3 Replies
View Related
Oct 28, 2010
Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution
Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences
Yesterdays log:
nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts
[code]....
There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.
View 2 Replies
View Related
Nov 2, 2010
I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.
I thought that this was due to xrandr, however when I issue:
# xrandr -s 1024x768
only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).
I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.
PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.
View 5 Replies
View Related
Mar 1, 2010
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
View 14 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jan 30, 2010
The login screen is always at maximum screen resolution, how can i change this?
View 2 Replies
View Related
Jan 10, 2011
I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200
# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60
[Code]...
View 9 Replies
View Related
Apr 8, 2011
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 4 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Jul 6, 2011
I have setup a Sun Ultra 2 with Debian 6. It currently has dual 200MHz sparc I CPUs, 512MB RAM, and a Creator 3D 15MB video card. I have in the mail on its way to me dual 300MHz sparc II CPUs and enough RAM to max this thing out at 2GB. Anyway, I am currently having an issue configuring xorg.conf. The only resolution available to me is 1152x900 (which isnt even a supported resolution by my monitor), but Id like to use 1280x1024. I have tried for probably over a week now to no avail. I will paste my current xorg.conf file (the relevant parts), and please keep in mind that I have been messing with this file for a while so sorry if it looks bad.
View 8 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
Feb 8, 2010
I've been loitering over my resolution and nvidia xserver settings for about 2 days now, fiddling with xorg.conf and breaking ubuntu in the process trying to get my resolution at it's native settings. I've searched through many forums and none of them have solved my problem. Its maximum resolution is 1360x768, which isn't enough. It should be 1440x900. I have tried adding custom modes to the xorg.conf file and it wouldn't work. I don't know what's going on. Also here is my xorg.conf since I saved the nvidia settings to it...
[Code].....
View 9 Replies
View Related
Nov 10, 2009
I recently installed Kubuntu 9.10 onto a HP/Compaq dc5000, video card Intel 865GV w/Extreme2.The LCD monitor I have is V7 L17PS max resolution: 1280x1024.My problem is the maximum resolution that is available in Kubuntu is 800x600.I tried to run "sudo dpkg-reconfigure xserver-xorg" from terminal however I got not response. No screen or app started.I also tried to install "xserver-xorg-video-intel" from KPackageKit however it never allows this, the Apply button stays grayed out.What can I do? Am I able to change the screen resolution to something higher?
View 3 Replies
View Related
Jan 17, 2010
I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?
The weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptom im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.
View 8 Replies
View Related
Apr 13, 2011
I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.
View 2 Replies
View Related
Sep 15, 2010
I've been trying a bunch of different solutions to getthis fixed. Let me give you the details: I'm currently on Ubuntu 10.04 Lucid Lynx. I have a Geforce FX 5200 graphics card and I have the nvidia proprietary drivers installed (version 96, I tried 173 as well but there's doesn't seem to be a difference).
My monitors native resolution is 1680x1050 but since my graphics card cannot handle that resolution I use 1280x1024. I've had this resolution working before on Ubuntu as well as Windows with the same graphics card. My problem is that in nvidia-control, the list of resolutions does not include 1280x1024, and the closest to that is 1280x900 which is not supported by my monitor. So the only tolerable resolution I can get is 1024x768.. if you've used this resolution then you know that it is not tolerable for long. So I tried to force the resolution by using xorg.conf.. Here it is:
[Code]...
For some reason this isn't forcing 1280x1024.. I'm still in 1024x768 and it still doesn't list it in nvidia-control.. What's weird is that on the previous release (Jaunty or Hardy) this xorg.conf worked fined and got me my 1280x1024.
View 4 Replies
View Related
Feb 4, 2011
Just tried and failed miserably to get an Nvidia 6200 based graphics card to play nice with my machine.After putting my ATI Radeon 9200 back in the box, my emulators have gone all kinds of strange.
ZSNES will crash as soon as I attempt to load a game full screen and will leave the screen resolution at the resolution ZSNES was running in (800 x 600, for example.GENS again will alter the screen resolution to whatever it was running in when the emulator is minimised. I'm running 10.10 with 1gb Ram, 128mb ATI Radeon card, P4 3ghz. Was all fine until I tried the new card and I did a fresh install only last week .
View 2 Replies
View Related
Nov 17, 2009
my PC can have resolution of 1024x768 while running Windows XP and Ubuntu 6, but on Mac OS X and Centos 5 I just can use in 800x600 resolution mode.in Centos, i did:
# lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
# lspci -n | grep -i 00:02.0
00:02.0 0300: 8086:2772 (rev 02)
then went to [URL] but found no drivers for 8086:2772 no drivers for VGA Intel 82945G/GZ?
View 1 Replies
View Related
Nov 22, 2009
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
View 14 Replies
View Related
