Ubuntu Multimedia :: Resolution With Emulators After Install New Graphics Card?
Feb 4, 2011
Just tried and failed miserably to get an Nvidia 6200 based graphics card to play nice with my machine.After putting my ATI Radeon 9200 back in the box, my emulators have gone all kinds of strange.
ZSNES will crash as soon as I attempt to load a game full screen and will leave the screen resolution at the resolution ZSNES was running in (800 x 600, for example.GENS again will alter the screen resolution to whatever it was running in when the emulator is minimised. I'm running 10.10 with 1gb Ram, 128mb ATI Radeon card, P4 3ghz. Was all fine until I tried the new card and I did a fresh install only last week .
View 2 Replies
ADVERTISEMENT
Apr 13, 2011
I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.
View 2 Replies
View Related
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
View Related
Jan 23, 2011
Okay first off I'm a noob with Ubuntu. I've been trying to get Warcraft 3 and WoW to run on ubuntu via Wine, so far I managed to get them installed and running but I always have problems with graphics (poor rendering as oposed to when I ran them on windows). So I figured that maybe the graphics card/driver aren't installed correctly.
On the terminal I got this information: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) I checked System > Administration > Additional Drivers When it finishes searching for drivers I get the message "No proprietary drives are in use on this system" (I have no idea what this means, I read elsewhere that I should check this) So um, I don't know If any of this is useful or necessary to fix my problem.
View 1 Replies
View Related
Mar 28, 2010
Using Ubuntu 9.10 I installed Ubuntu onto a second hard drive and everything seems to work fine except for the fact that I cannot install the driver (it says not supported or something) when I downloaded it from the website. I downloaded the driver made for Linux. The driver manager claims "no proprietary drivers." At the moment it shows to be using integrated graphics, but I need the full hardware graphics to play games. The open source alternate driver didn't work either.
View 2 Replies
View Related
Sep 15, 2010
I've been trying a bunch of different solutions to getthis fixed. Let me give you the details: I'm currently on Ubuntu 10.04 Lucid Lynx. I have a Geforce FX 5200 graphics card and I have the nvidia proprietary drivers installed (version 96, I tried 173 as well but there's doesn't seem to be a difference).
My monitors native resolution is 1680x1050 but since my graphics card cannot handle that resolution I use 1280x1024. I've had this resolution working before on Ubuntu as well as Windows with the same graphics card. My problem is that in nvidia-control, the list of resolutions does not include 1280x1024, and the closest to that is 1280x900 which is not supported by my monitor. So the only tolerable resolution I can get is 1024x768.. if you've used this resolution then you know that it is not tolerable for long. So I tried to force the resolution by using xorg.conf.. Here it is:
[Code]...
For some reason this isn't forcing 1280x1024.. I'm still in 1024x768 and it still doesn't list it in nvidia-control.. What's weird is that on the previous release (Jaunty or Hardy) this xorg.conf worked fined and got me my 1280x1024.
View 4 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
Feb 3, 2010
i don't know what this os want from me one moment everything is fine the next it's not first of all it started asking me to choose resolution on startup it said undefined b31 and i have to press enter then 366 for 1024x1280 32 bit how can i fix this problem how can i define 366 resoultion as default and how can i update the screen card driver for 10.1 i have ati hd 3650 agp card. and by the way what are the cool things i can do with graphics here except the rottaing windows.
View 1 Replies
View Related
Nov 22, 2009
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
View 14 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Nov 18, 2010
I have recently started using openshot to edit video and have found it very good. Previously I have been using Kino and openshot certainly seems more intuitive. Trouble is the more ambitious my productions the more juddery and prone to crashing the program becomes So I am thinking of an upgrade. At the moment I am using on board graphics. Or would more ram be the first thing to go for.
View 1 Replies
View Related
May 9, 2011
trying to get Ubuntu to work properly on a Del Dimension 2400. It has on board Intel Extreme graphics card. [URL] It installs and but runs slowly when the ubuntu GUI is up and running. The CPU is maxed out for quite small tasks. Selecting additional drivers gives nothing, so I guess it isn't running the graphics card in hardware acceleration - which is slowing down the system. I want to buy a graphics card to use on this Dell PC. It uses PCI expansion cards. I'm thinking of ebaying a second hand graphics card.
View 4 Replies
View Related
May 30, 2010
I have a Sapphire HD4850 X2 1G GDDR3 PCI-E graphis card, and presently I ruin a Windows 7 OS, but am moving to Ubuntu GUI Desktop, and was wandering where I could get Linux drivers for this card (and they are NOT available from the Sapphire site), or how I could get Windows drivers to work with this card, I do have 4 monitors using this card so I need the drivers and ability to use 4 monitors.
View 2 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Oct 21, 2010
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
View 1 Replies
View Related
Oct 25, 2010
I have an older Dell Inspiron 4550 w/ 2G memory and 38G HD. I believe I have GE440 graphics card. I am running 10.04, but the graphics are slower than I would like and when I tried to upgrade to 10.10, my card was not supported and I had to re-install 10.04.
- Can anyone recommend a good graphics card to choose for an upgrade for this machine?
- Is changing graphics cards pretty much the same as installing a memory chip, What is the best way to do the upgrade?
View 6 Replies
View Related
Jul 12, 2011
I have a lenovo ideapad z570 with intel i5 2nd gen 2410m processor and intel integrated graphics. In lshw, my graphics are shown as: "2nd Generation Core Processor Family Integrated Graphics Controller"
Code:
glxinfo| grep render
returns:
Code:
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile GEM 20100330 DEVELOPMENT x86/MMX/SSE2
Compiz works fine, so do some 2D games. However, performance is choppy on most other games(2D and 3D).
Are these graphics fully supported by Ubuntu yet? If not, does any other linux flavour have support for this?
View 1 Replies
View Related
Sep 6, 2010
After a while I decided to give ubuntu another go so I set up a dual boot configuration. Everything works well except my graphics card. I have 2 problems (don't know if they are connected)To start with, it's a laptop with an onboard Radion 3200 and it has another ATI Mobility Radeon HD4570 built in. I have an external screen attached to my laptop. (1920x1080)When Ubuntu first booted it asked me if I wanted to install proprietary drivers, so I did that. Now when I took a look in the control center it showed my two monitors but they were both attached to the 3200 and I can't seem to find anything about the other (better) card. It does not appear in the proprietary drivers, I can't (I think) select it in the configuration utility.
View 5 Replies
View Related
Oct 12, 2010
Just fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
View 3 Replies
View Related
Jan 3, 2011
I'm building a new Ubuntu system for use as a desktop machine and personal server (http, smb, smtp). It'll be based on an Intel i7 950 and a Gigabyte X58A-UD3R LGA 1366 ATX Motherboard.
I'm looking for recommendations for a graphics card that will support dual monitors and runs well under Ubuntu. Would like some decent 3D support.
View 3 Replies
View Related
Jan 6, 2011
I got it into my head to change the graphics card in my Ubuntu 10.04 media center. I removed my old ATI card and installed a new ASUS ENGT 430. I tried to uninstall the ATI drivers and associated software prior to this but obviously I didn't get it all. When I boot into X it takes me in under low graphics mode. I've tried rebuilding my xorg.conf. I've installed the driver from the ASUS site and nothing.
I decided to swap in my old ATI card and obviously I've not cleared all the ATI artifacts as the low graphics mode that machine first booted into was at the high resolution that I was running previously. I uninstalled all Nvidia software but now I'm not even able to get the old ATI software to work. Jockey sees the drivers after I install them through the Software Center but they're not really working. XBMC won't start for GL reasons.
What do I need to purge all graphics drivers and install the nVidia driver? I've got a feeling if I started from scratch I could get it to work but I seriously don't want to reinstall everything. I've worked hard to get my XBMC config just so and I don't want to lose everything
View 2 Replies
View Related
Mar 11, 2011
i have an ati radeon x1550 (pretty old, i know) graphics card which worked perfectly under windows 7. i recently read that ati appears to have dropped support for this card installed on recent ubuntu distributions (i'm using ubuntu 10.10 + kde 4.6.1) the thing is, when i'm watching something on videos or playing a movie through vlc, the image looks jittery (random horizontal lines that break the image, it's pretty subtle but it's there...) i'm new to ubuntu (switched from windows 7 a couple of months ago) and what i'm looking for is one of two:
-either a solution to my drivers problem so i can use this card with full 2d and 3d support (like i used to in windows) or, a recommendation of which graphic card i should switch to (my motherboard has a 'pci express x16' slot). i've searched countless forums and sites but i can't reach a final conclusion: am i supposed to have good 2d and 3d acceleration with this card (with the right drivers installed)?
if the answer is 'no', then i'd like to know what i should buy. for what i've read, apparently i should stay away from ati and intel and look for nvidia. i'm not a gamer so i really don't need an incredible 3d acceleration (although some would be nice, just in case) what i really need is for my system to be snappy (i work with my computer) and most of all good support for multimedia apps (i would like to be able to use xbmc smoothly for instance) i'd like to know which is the cheapest graphics card that i can get that will meet my needs (the ones i just listed above)
View 5 Replies
View Related
Mar 16, 2011
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn]
Subdevices: 8/8
Subdevice #0: subdevice #0
[code]...
View 1 Replies
View Related
Apr 29, 2011
After I've installed an ASUS graphics card (ATI chip) my Ubuntu got no sound at all. My Codec is: VIA VT1708B 8-Ch. I've chosen "Internal Audio Analog Stereo" in Sound Preferences. Windows on the same machine works properly.
View 3 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Nov 8, 2010
Just wondering if there were any NES, SNES, etc emulators compatable with PowerPC Debian?
Not entirely sure if they will run well, but can't hurt to give it a try.
View 9 Replies
View Related
Apr 30, 2010
It all started Tuesday morning. I woke up and turned my computer on. Normally I just leave it on all the time, but I turned it off the previous night for some reason. When I turned it on, everything worked fine for about 10 minutes, until my monitor said "Monitor Working Out of Scan Range." I messed with the settings on the monitor to try and get it back, but to no avail. Restarting would make it work, but for even shorter periods. It eventually would display the manufacturer image (Everex), and then go dead again with the same message.
I thought it was the monitor at first, and got a new one. The new one is a wide screen 18.5 inch Dell IN1910N. The problem persisted, so I knew it wasn't this. I kinda figured it out when I started smelling something burning coming from my computer, and discovered it was the graphics card I installed awhile back. It is the pci ATI X1550, and its fan no longer worked.
So I figured, well, I will just remove it and go back to the onboard video. Doing this worked fine, until I got to the stage where it tried to boot to the Xserver, and then the computer just hangs. No sounds indicate I ever get to a logon screen or anything.
Now, I tried commands like sudo dpkg-configure xserver-xorg, and it asked me a lot of questions about my keyboard, but didn't fix my video. I also tried the "Xfix" option in recovery mode, and it purged all the old fglrx drivers, but that didn't help either.
I am currently using a live CD (I was doing straight command-line for awhile, after I also played hell getting the wireless working). I tried literally coping and pasting the entire contents of the X11 folder over, but that didn't work either (the xorg.conf files were the same anyway). I don't know what to do to get my old partition to boot X correctly.
All the commands I was copying before are not in my terminal now, and I'm not sure exactly what command-line information you need. I know that Openchrome is supposed to run the onboard VIA video, but I don't recall the command that tells me everything about it.
View 5 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Jan 31, 2011
I'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.
View 6 Replies
View Related
