I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200
# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60
[Code]...
I'm installing a non-X server using squeeze 32bit netinst iso, expert installation. I don't know that I can specify "debian-installer/framebuffer=false" during the installation, after reboot I got a framebuffer display with console fonts smaller and fonts look like ubuntu. I search around I can edit GRUB config for the resolution items or disable framebuffer. How can I disable the framebuffer (use normal text system fonts) when booting in LILO?
I got everything installed and setuped, I don't want to re-install the OS again.
I am on Lucid 10.04 with Nvidia 9600m (v195.36.24) My TV is 1280x720, my Laptop is 1600x900 (Closest setting to the TV is 1360x768 ). I plug my laptop to my tv via an HDMI cable. I press F1 to get into my presentation mode, and the tv shows most of the desktop, but not all of it. Is there any way to conveniently make it so it automatically sets it to 1280x720?
View 1 Replies View RelatedI have ad724 chip from analog devices that converts VGA signal to composite video, but it requires input in PAL standart. Is it possible to change framebuffer resolution and synchronisation to achive PAL on RGB output? I have try to change this using fbset but there is no change of resolution. Grub runs kernel with framebuffer of 640x480 resolution and i'm able to watch videos using mplayer on cli ubuntu version, but i have problems with setting it up to PAL.Why fbset does not affect to current display?
PS. I have Intel Atom CPU with intel integrated graphics (maybe problem is here?)
I am using 11.4 32 bit Gnome. It is working fine expect high CPU usage. Specially by X-ORG. I am running this on my old PC with core2duo, Intel motherboard DG31PR, Integrated Intel GMA 3100 Graphics(intel G31 Exprss chipset) , 3 GB RAM I went to Hardware information in YAST and found some discrepancies.
1. desktop board is listed as D945GTP instead of DG31PR
2. in framebuffer 1440 X 900 is not listed which is my monitor resolution
3. BIOS info has no vendor name
I hope this is not a totally ridiculous question. I use putty often to remotely connect to my laptop at home. I recently learned about the Linux framebuffer, and was curious if there was a tool like putty that would let me remotely connect to my laptop but use the /dev/fb0 device for forwarding graphics. Sort of like a vnc or X11 forwarding, but instead of using X, gdm, kdm etc. we use the framebuffer.
View 2 Replies View RelatedI just installed Debian stable on my desktop computer and when I start it up I get a blank screen that says cannot display video in this mode.
View 9 Replies View RelatedRecently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
How can I know the display resolution (e.g. 1280x1024 px) without starting X?I mean: let us suppose that /etc/X11 was renamed to /etc/x11. After reboot Debian starts in text mode only.
View 9 Replies View RelatedI've just completed my first pc build, and installed Ubuntu 8.2. My build was focussed around a legacy Apple Cinema 30" display, which has 2560x1600 @ 60fps resolution. The motherboard - Gigabyte H97N-Wifi - supports that display, although the display drivers are supplied by Intel, and are therefore nonfree. On startup, my display resolution defaults to 1200x800. This is what /var/log/Xorg.0.log says about it:
Code: Select all[snip]
[ 1.830] (II) intel(0): Output VGA1 has no monitor section
[ 1.881] (II) intel(0): Output HDMI1 has no monitor section
[ 1.882] (II) intel(0): Output HDMI2 has no monitor section
[ 1.882] (II) intel(0): Output HDMI3 has no monitor section
[ 1.933] (II) intel(0): EDID for output VGA1
[ 1.986] (II) intel(0): EDID for output HDMI1
[ 1.986] (II) intel(0): Manufacturer: APP Model: 9232 Serial#: 33555281
[code]...
I bumped into a webpage which stated that xrandr does not work with proprietary drivers, and if that's true, I can't get it to change resolution on my screen.
I've decided to try Debian Lenny, after i succefully installed it without any problems there appears to be a problem - after loading the services and etc, my monitor turns off with a floating message saying it cannot display the current resolution, and that i should set it to 1280x1024@60Hz.
View 1 Replies View RelatedI recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies View RelatedI have a brand new computer with an ATI Radeon HD5850 video card I have a LCD monitor with a native resolution of 1920x1080. I installed Debian Testing 2.6.32-5-amd64
Because I have several machine, I use a KVM (switch keyboard) in the middle. This KVM is quite old but still work correctly only problem is that it don't forward the EDID information. Until now it wasn't a problem, and by specifying the correct parameters of the monitor in /etc/X11/xorg.conf , I always succeed to reach the 1920x1080 resolution
In installed the proprietary drivers from ATI Catalyst 10.6 (last version)
since I have 2 problems :
first in the console I used framebuffer in 1280x1024x32. Before installation of the ATI drivers, it was ok, now the screen is completely black !! on every tty (I didn't investigate much on this trouble yet)
Second problem:
I can't reach the native resolution of my monitor ! No matter what I'm doing, the best the driver propose is 1600x1200 !!
I made a lot of test and modification in xorg.conf but without success, it always goes back to this resolution and never propose something higher For information, if I connect the monitor directly to the video card (removing the KVM), everything is OK and the resolution is automatically set to 1920x1080
/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code].....
I've just tried to install X on my new debian system which had a nasty side effect.
I can see the bootcycle up to "Waiting for /dev to be fully populated." and then the screen switches into a display mode unsupported by my display. I've had problems like this many times before because the display returns it's capabable of resolutions like 2048x1536, which it just isnt. I've had to disable autodetection whenever using this display. One thing to note thought is that it's NOT X that's messing up the display. It's setting the wrong display mode even before the filesystems are mounted. And I've already uninstalled X with no change either. Also recovery(single user) mode has no proper display output either.
what is setting my display to the wrong mode?
I have wheezy installed on my laptop with XFCE 4.8 and kernel 3.14 from backports. The laptop uses Nivida-optimus:
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 1292 (rev a1)
I installed the proprietary bumblebee-nvidia (version 3.2.1) as per the instructions in URL...The problem is that when I connect a monitor to the laptop, the image is duplicated with only part of the screen showing on the second monitor. The monitor itself is not detected in the display settings or arandr / xrandr, so I can't change the resolution or set dual display, etc. Here is the output of xrandr:
Code: Select all$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 0.0*
I have a nVidia GeForce GTX 760 Ti Graphics card. I have installed the proprietary driver and disabled the open source one. The problem is when I connect to two monitors via DVI and VGA, the VGA one appears to be 'unknown' and is using incorrect resolution of 640x480. How can I correct its resolution?
The xrandr output
Screen 0: minimum 8 x 8, current 2560 x 1080, maximum 16384 x 16384
DVI-I-0 connected 640x480+0+181 (normal left inverted right x axis y axis) 0mm x 0mm
640x480 59.9*+
320x240 120.1
DVI-D-0 connected 1920x1080+640+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 60.0
1440x900 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x720 60.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
my TV resolution is 1366x786, I've set it with xrandr [URL] , but any mode I pick there are two black strips on the sides of my TV display. I'm using debian jessie 8.1 and xfce.
View 4 Replies View RelatedAfter spending the last couple of days running different distros on a old Compaq armada 7800 I've settled on Debian, as it's recognised most of the hardware with out to much tinkering
Only problem i have is the display resolution i need to run at 1024 x 768 but the max i can get is 800x600 I believe the display adapter is a S3 Virge/MX 2D/3D Dual Display Accelerator
Is there a driver/package I can download to correct this issue
I can use the console as long as some one give me Janet and John instructions
I have 3 little pieces of hardware called Xcore.
They are very stripped down computers with minimal configuration : 1Ghz CPU, 1GB RAM, 1 SD Card (and usual USB/VGA ports).
Everything runs fine out of the box with Debian 7.2
Linux debian 3.2.0-4-486 #1 Debian 3.2.51-1 i586 GNU/Linux
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
I installed a GIMP plugin (David's batch processor gimp) and a lot of packages got updated in the process.
The monitor resolution dropped significantly and going to applications -> system tools -> preferences -> settings -> display gives me the message 'could not get screen information' my webcam and microphone is not recognized anymore either ALT + TAB does not change between open windows. power off does not work. I have to shutdown the system using the command line.
The GUI has changed a lot as well. new color schemes (that I don't really like) file system manager has a completely new look too.
it is very strange. My GRUB screen is still in the old resolution. when the system boots up at some point the resolution changes to the lower resolution.
debian version
Code: Select allwim@debian7vaio15:~$ lsb_release -da
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie
[CODE]..
I keep failing at properly configuring my frame buffer.My laptop screen has a resolution of 1440 x 900, so I want 0x036b throughout the whole boot process.However, with my present configuration I have 1440x900 in the grub2 menu and the subsequent 2 seconds, while it displays "Loading Linux 2.6.32-5-amd64"(I reckon this still belongs to grub).
View 7 Replies View RelatedThe resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies View RelatedI am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?
[Code]...
I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
View 5 Replies View RelatedI searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedI cloned my disk that have dual boot in it clone the disk remove the old one put the new one so far okay. But when i put with the new disk to linux it goes to the emergency mode:
run fstab and this is my fstab results:
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=cd9637db-0479-4ef0-90fd-481a50e23060 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=df29ffb9-91a8-48d7-91cd-5e671b55677d none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=696FF92C4C532245 /media/Windows ntfs defaults,x-gvfs-name=Windows,x-gvfs-icon=%2Fhome%2Fdarkangel%2FDownloads%2Fwindows_hdd_icon.png,x-gvfs-show 0 0
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.00*
800x600 61.00
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [ 15.510099] nouveau ![ DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [ 15.510148] nouveau E[ DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [ 15.510191] nouveau E[ DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [ 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution
Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences
Yesterdays log:
nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts
[code]....
There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.
I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.
I thought that this was due to xrandr, however when I issue:
# xrandr -s 1024x768
only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).
I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.
PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.