Debian Configuration :: Same Resolution Through Whole Bootprocess
Mar 28, 2011
I keep failing at properly configuring my frame buffer.My laptop screen has a resolution of 1440 x 900, so I want 0x036b throughout the whole boot process.However, with my present configuration I have 1440x900 in the grub2 menu and the subsequent 2 seconds, while it displays "Loading Linux 2.6.32-5-amd64"(I reckon this still belongs to grub).
View 7 Replies
ADVERTISEMENT
Jun 24, 2015
I installed a GIMP plugin (David's batch processor gimp) and a lot of packages got updated in the process.
The monitor resolution dropped significantly and going to applications -> system tools -> preferences -> settings -> display gives me the message 'could not get screen information' my webcam and microphone is not recognized anymore either ALT + TAB does not change between open windows. power off does not work. I have to shutdown the system using the command line.
The GUI has changed a lot as well. new color schemes (that I don't really like) file system manager has a completely new look too.
it is very strange. My GRUB screen is still in the old resolution. when the system boots up at some point the resolution changes to the lower resolution.
debian version
Code: Select allwim@debian7vaio15:~$ lsb_release -da
No LSB modules are available.
Distributor ID:Â Â Debian
Description:Â Â Debian GNU/Linux 8.1 (jessie)
Release:Â Â 8.1
Codename:Â Â jessie
[CODE]..
View 2 Replies
View Related
May 6, 2011
The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies
View Related
Aug 15, 2011
I am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?
[Code]...
View 12 Replies
View Related
Aug 22, 2011
I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
View 5 Replies
View Related
Jul 26, 2015
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
  1024x768   61.00*
  800x600    61.00Â
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [Â Â 15.510099] nouveau ![Â DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510148] nouveau E[Â DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510191] nouveau E[Â Â Â DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [Â Â 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
View 3 Replies
View Related
Oct 28, 2010
Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution
Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences
Yesterdays log:
nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts
[code]....
There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.
View 2 Replies
View Related
Nov 2, 2010
I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.
I thought that this was due to xrandr, however when I issue:
# xrandr -s 1024x768
only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).
I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.
PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.
View 5 Replies
View Related
Jan 30, 2010
The login screen is always at maximum screen resolution, how can i change this?
View 2 Replies
View Related
Jan 10, 2011
I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200
# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60
[Code]...
View 9 Replies
View Related
Apr 8, 2011
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 4 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Jul 6, 2011
I have setup a Sun Ultra 2 with Debian 6. It currently has dual 200MHz sparc I CPUs, 512MB RAM, and a Creator 3D 15MB video card. I have in the mail on its way to me dual 300MHz sparc II CPUs and enough RAM to max this thing out at 2GB. Anyway, I am currently having an issue configuring xorg.conf. The only resolution available to me is 1152x900 (which isnt even a supported resolution by my monitor), but Id like to use 1280x1024. I have tried for probably over a week now to no avail. I will paste my current xorg.conf file (the relevant parts), and please keep in mind that I have been messing with this file for a while so sorry if it looks bad.
View 8 Replies
View Related
Mar 30, 2010
i have downloaded the pidgin.repo file from the web and copied in /etc/yum.repos.d. and i simply start the yum-updatesd service. When i fire the command yum install pidgin, it gives some name resolution problem. i am accessing net through proxy server.RHEL 5 is my distro. This is what the error msg i am getting.
[Code]....
View 5 Replies
View Related
Apr 2, 2010
I am successfully able to kickstart FC12 onto my system, however once anaconda runs it changes the resolution of the console when running a text mode install. Are there any kickstart options that can control this behavior?
I tried to set resolution and nofb in the kickstart configuration. I am using the text option for text install. My problem is that my remote KVM doesn't support the console resolution.
View 3 Replies
View Related
Dec 15, 2010
I've read some people having the same problem, but I can't manage to fix it. I got a 1440x900 screen. Every time I reboot my system starts up with 1400x1050 , I have to go to System settings to fix it, options don't get saved as one would expect.
Well, I think my problem is cause of nvidia drivers, so I go to nvidia settings to get this fixed. But, these settings are all fine, it says 1440x900. When I try pressing Save to X (to make sure it gets saved), i get a failed to parse message (Failed to parse existing X config file '/etc/X11/xorg.conf'!). I've got driver version 256.53
Oh well, screw this, I'll do it manually, so I go to the xorg.conf file. But over here everything says 1440x900. How come my resolution keeps changing each time I reboot?
View 4 Replies
View Related
Mar 31, 2010
I clean installed xubuntu on an old laptop. I think I messed up the original configuration of xorg though because the highest resolution is 800x600.
# dpkg-reconfigure xserver-xorg
or
$ sudo dpkg-reconfigure xserver-xorg
[code]....
View 1 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
Nov 18, 2010
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
View 6 Replies
View Related
Jul 20, 2011
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
View 1 Replies
View Related
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
Aug 3, 2011
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies
View Related
Mar 19, 2011
A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
View 1 Replies
View Related
Jul 31, 2011
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies
View Related
Mar 5, 2010
I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies
View Related
Jun 17, 2010
I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
View 1 Replies
View Related
Jul 6, 2010
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
View 14 Replies
View Related
Oct 3, 2010
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
View 1 Replies
View Related
Nov 14, 2010
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies
View Related