Debian Configuration :: Screen Resolution With Kernel 2.6.32-5?

Aug 22, 2011

I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.

View 5 Replies


ADVERTISEMENT

Debian Configuration :: Login Screen Always At Maximum Resolution / Change It?

Jan 30, 2010

The login screen is always at maximum screen resolution, how can i change this?

View 2 Replies View Related

Debian Configuration :: NVidia - Set Screen Resolution And Refresh Rate

Apr 8, 2011

I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....

View 4 Replies View Related

OpenSUSE Hardware :: Screen Resolution Configuration Resets After Reboot?

Dec 15, 2010

I've read some people having the same problem, but I can't manage to fix it. I got a 1440x900 screen. Every time I reboot my system starts up with 1400x1050 , I have to go to System settings to fix it, options don't get saved as one would expect.

Well, I think my problem is cause of nvidia drivers, so I go to nvidia settings to get this fixed. But, these settings are all fine, it says 1440x900. When I try pressing Save to X (to make sure it gets saved), i get a failed to parse message (Failed to parse existing X config file '/etc/X11/xorg.conf'!). I've got driver version 256.53

Oh well, screw this, I'll do it manually, so I go to the xorg.conf file. But over here everything says 1440x900. How come my resolution keeps changing each time I reboot?

View 4 Replies View Related

Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?

Jan 24, 2010

I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?

View 12 Replies View Related

Debian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel

May 13, 2011

I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".

View 1 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Debian Configuration :: Low Resolution Graphics

Jun 24, 2015

I installed a GIMP plugin (David's batch processor gimp) and a lot of packages got updated in the process.

The monitor resolution dropped significantly and going to applications -> system tools -> preferences -> settings -> display gives me the message 'could not get screen information' my webcam and microphone is not recognized anymore either ALT + TAB does not change between open windows. power off does not work. I have to shutdown the system using the command line.

The GUI has changed a lot as well. new color schemes (that I don't really like) file system manager has a completely new look too.

it is very strange. My GRUB screen is still in the old resolution. when the system boots up at some point the resolution changes to the lower resolution.

debian version
Code: Select allwim@debian7vaio15:~$ lsb_release -da
No LSB modules are available.
Distributor ID:   Debian
Description:   Debian GNU/Linux 8.1 (jessie)
Release:   8.1
Codename:   jessie

[CODE]..

View 2 Replies View Related

Debian Configuration :: Same Resolution Through Whole Bootprocess

Mar 28, 2011

I keep failing at properly configuring my frame buffer.My laptop screen has a resolution of 1440 x 900, so I want 0x036b throughout the whole boot process.However, with my present configuration I have 1440x900 in the grub2 menu and the subsequent 2 seconds, while it displays "Loading Linux 2.6.32-5-amd64"(I reckon this still belongs to grub).

View 7 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Change Resolution Of Console (tty)?

May 6, 2011

The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?

View 1 Replies View Related

Debian Configuration :: Host Name Resolution Failure?

Aug 15, 2011

I am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?

[Code]...

View 12 Replies View Related

Debian :: Xorg Screen Resolution To 1366x768 Debian Lenny

Mar 24, 2010

i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics

View 2 Replies View Related

Debian Configuration :: Samsung VGA Monitor With GT 730 - Can't Set Correct Resolution

Jul 26, 2015

Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730

Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":

Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
   1024x768      61.00*
   800x600       61.00 

[Code] ....

Found these lines in /var/log/kern.log stating "unknown Kepler chipset":

Code: Select allJul 26 17:35:34 DRAGON kernel: [   15.510099] nouveau ![  DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [   15.510148] nouveau E[  DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [   15.510191] nouveau E[     DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [   15.510419] nouveau: probe of 0000:03:00.0 failed with error -22

Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:

[URL] ....

Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?

View 3 Replies View Related

Debian Configuration :: Nouveau: Resolution Re-ducted To 1024x768?

Oct 28, 2010

Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution

Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences

Yesterdays log:

nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts

[code]....

There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.

View 2 Replies View Related

Debian Configuration :: Xorg Affects Console Resolution?

Nov 2, 2010

I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.

I thought that this was due to xrandr, however when I issue:

# xrandr -s 1024x768

only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).

I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.

PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.

View 5 Replies View Related

Debian Configuration :: Framebuffer Uvesafb Display Mode/resolution?

Jan 10, 2011

I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200

# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60

[Code]...

View 9 Replies View Related

Debian Configuration :: Nvidia Driver Resolution Setting Not Working

Jun 5, 2011

I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.

View 12 Replies View Related

Debian Hardware :: Sun Ultra 2 Xorg Configuration - Only Resolution Available Is 1152x900

Jul 6, 2011

I have setup a Sun Ultra 2 with Debian 6. It currently has dual 200MHz sparc I CPUs, 512MB RAM, and a Creator 3D 15MB video card. I have in the mail on its way to me dual 300MHz sparc II CPUs and enough RAM to max this thing out at 2GB. Anyway, I am currently having an issue configuring xorg.conf. The only resolution available to me is 1152x900 (which isnt even a supported resolution by my monitor), but Id like to use 1280x1024. I have tried for probably over a week now to no avail. I will paste my current xorg.conf file (the relevant parts), and please keep in mind that I have been messing with this file for a while so sorry if it looks bad.

View 8 Replies View Related

Debian :: Can't Get Optimal Screen Resolution?

Aug 23, 2010

I have a fresh install of debian on an older laptop. The screen resolution is 800 x 600, but I want it to be 1024 x768. I know this screen can handle this resolution because I've used it before. I tampered with xorg.conf according to this link, viewtopic.php?t=26577, but to no avail. Here is my xorg.conf

Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc104"
Option"XkbLayout""us"

[Code]...

View 6 Replies View Related

Debian :: Screen Resolution Became Lower?

Jun 23, 2010

One day when i logged in, my screen resolution became lower. The sistem do not recognize anymore my old resolution (native) 1600x900 . And you can realize that maybe there are problems with the video card, because the system is slower than before in this terms. What could have happened?

View 4 Replies View Related

Debian :: Cannot Seem To Change Screen Resolution

Aug 17, 2010

Ever since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.

Section "Monitor"
Identifier"Configured Monitor"
EndSection

Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"

Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection

View 2 Replies View Related

Debian :: Get Screen Resolution Up To 1400x900?

Jan 19, 2010

I've been googling around for a while now and have been unsuccessful in setting up the screen resolution up properly... I have the manual for my monitor in case you ask for any of the specs. Other than unsuccessfully changing the xorg file, I've successfully went through the steps on Debians wiki site for NvidiaGraphicsDrivers in order to get my 9800gt working. I want to get the resolution upto 1400x900, but in the "Screen Resolution" window I only have the option for 640x480,50Hz

[Code]...

View 9 Replies View Related

Debian :: Screen Resolution For The Terminal?

Nov 3, 2010

I am on a Debian 5 server and there is no desktop environment installed.I use mysql client on localhost and it's very hard to read tables with the lowest screen resolution.Is there a way to change it? I saw a few times, BACKTRACK changes command line's screen resolution but I don't know how to it or is it possible on debian.

View 7 Replies View Related

Debian :: Screen Resolution Of 505-i386-kde-CD-1

Aug 21, 2010

I just installed debian lenny KDE 5.5, when installing the screen was busy at 100% but when I first loggin in, at least I Had 75% of screen resolution. less than 102x768. What can I do? this new serie resoletion screen but the system allows me to be in graphical mode. To be clear, the system gives me at least 800x400. i'm using Toshiba Tecra M1 with a standard vga graphic adapter

View 18 Replies View Related

Debian :: Getting A Screen Resolution Of 1280x1024 On Laptop?

Dec 25, 2010

I am getting a screen resolution of 1280x1024 on my laptop, but I sometimes like the lower resolutions, which are unaccessible via the Screen Resolution program.

View 2 Replies View Related

Debian Multimedia :: I3 Cannot Handle Screen Resolution

Feb 14, 2016

I just changed the desktop on my thinkpad from awesome to i3. And now I have some very strange issues with the screen resolution. Because at home I use this x60 thinkpad on a dockingstation and a 19" display. As long as I used Awesome as my Desktop, the display manager as well as the desktop itself could handle the different screen resolution depending on if I'm out with just my 12" on my thinkpad or with the much bigger screen on my home 19" display.

I can understand that i3 maybe cannot handle this alone and I need xrandx to enforce the screen resolution. But why is the display manager (lightdm) also affected by this change? What is so different that even the DM cannot find the proper screen resolution?

View 1 Replies View Related

Debian Multimedia :: Could Not Maximize Screen Resolution?

Mar 18, 2010

I'm running debian lenny and want to change the screen resolution from 640x480 to 1024x768. I'm using a nVidia Geforce FX 5800 and I installed the additional nvidia drivers with the help of this tutorial [URL]. Here is my xorg.conf

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection .....

When I try to change the screen resolution via the gnome menu I just can choose the 640x480 resolution and 50Hz refresh rate.

View 4 Replies View Related

Debian Multimedia :: Getting 1024x768 Screen Resolution

Sep 3, 2010

I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.

[Code].....

View 13 Replies View Related

Debian Hardware :: Can't Set Screen Resolution To 1280x800?

Mar 14, 2010

I have installed Debian 5.0.4 on my Toshiba laptop and I can not set screen resolution to 1280x800. I had Ubuntu and openSuse previsoly installed on Toshiba and had no problems with setting screen resolution. My /etc/X11/xorg.cong looks:

Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc105"
Option"XkbLayout""hr"

[Code]....

What I need to edit to this file to solve problem? Do I have to install additional software?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved