Debian Configuration :: Keyboard Freezes Periodically In Testing
Feb 17, 2011
I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.
Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.
This started happening after I started working on the kernel image and initramfs tools configurations basically started trying to make my system work the way I wanted.I can be doing anything like playing worms or being on this forum and the screen turns black but I don't lose energy just nothing shows on the screen and my keyboard doesn't respond the num lock doesn't turn either state,
So it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.
The OS is # uname -a Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux (aka Squeeze?)
Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.
One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.
I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing.I did some searching and couldn't find anything that looked similar
I am not sure exactly what is going on, but my ASUS UL30a (X32a) keeps locking up until I press a key, then it seems to resume for a while.
At first I thought it was just the mouse, but I noticed that the screen stops refreshing also. Hitting the space key (or any other key) brings the systme back to life (until it happens again).
It is a fresh install of Ubuntu 10.10, not much seems to be going on in the top list (compiz 1%, xorg 0.5%)
I am looking for ways to try and diagnose the problem (if not fix it )
(==) Log file: "/var/log/Xorg.0.log", Time: xx (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) open /dev/fb0: No such file or directory
[Code].....
My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15 code....
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
but I have been literally banging my head against the wall.I am trying to configure skype on my system (testing, x86) but unsuccessfully.Let me say that I am now using skype (static) as downloaded from skype website.
$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
As the title say, I'm having this odd problem, consistently, if I disconnect the USB keyboard from the box, it hangs after initializing md0 (raid of 10 sata disks).. The cursor blinks, but it never gets further, I've had it hanging like that for a day (I started the box before I went to school, and when I got home, I found that it never booted completely)
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg. After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation:
The following packages have unmet dependencies: libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed E: Broken packages
My desktop sometimes freezes and does not respond to keyboard or mouse. I initially thought the CPU was overheating but it froze tonight when my CPU temperature was 32C and it has been up to 50C without freezing. I am beginning to think it is a software issue rather than a hardware issue but do not know. I looked at the pm-powersave.log and user.log but did not see anything suspicious.
We have several systems (DELL-Server PowerEdgde) installed with Debian Jessie 8.4 (physical server and VM) and if the server has big Disk I/O (copy, backup with Backup Exec) the VMs freeze.
Console output: [168960.072192] INFO: task jbd2/xvda2-8:139 blocked for more than 120 seconds. [168960.072209] Not tainted 3.16.0-4-amd64 #1 [168960.072213] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [168960.072220] jbd2/xvda2-8 D ffff8803e72946e8 0 139 2 0x00000000
[code]....
The system installed: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06)
I installed Jessie with ext4 and ext3, same error!
I have a Dell Latitude E6410 which I can boot from an Iomega external hard drive when I want to run Linux on it. It is a work issued Windows XP laptop and when I travel, I am more comfortable with Linux, so I created a dual boot option without touching their hardware. The external hard drive plugs in to the USB ports and the BIOS picks it up as the primary boot media, although the internal drive is still present. (That is the desired outcome).The problem is that the system periodically locks up solid and only a forced power off will get it to respond. The system seems to go into a kernel panic and fails to write anything before dying. The system completely locks up and stops responding to mouse and keyboard. It also seems to drop off the network. When I look at the logs after restarting, nothing at all shows up related to a kernel panic or anything else. To further complicate the diagnosis, on the reboots, sometimes the boot process locks up at "Starting GDM3", sometimes it doesn't, and wont for several attempts but eventually will boot to gnome. Some times it runs fine for a few hours, sometimes for only a few minutes. Can anyone recommend a way to diagnose this?I am trying to run Debian 6.0 32-bit with the defaults.
After a successful install of the MFC-J4420DW printer and scanner using Brother's install utility, I am experience severe battery drain and xsane freezes (total system lockup, requiring using CONFIG_MAGIC_SYSRQ keyboard command REISUB or hard reset).
The Brother support page and utility/drivers are found here: URl....My laptop is the HP Elitebook 8540W and I am running Debian 8 using LVM, separate partitions for /home, /var, /temp, /swap, and /. I have looked at logs in /var/log. kern.log, daemon.log, messages and dmesg, but have not found any relevant info ...
I purged all drivers/packages and tried a manual install using each deb package, but ran into some permission errors, so I purged again. I also purged xsane and reinstalled it, then did a complete printer reinstall using the brother Driver Install Tool.The tool works great, full functionality for the MFC-J4420DW. But I know I can't live with the power drain, and I would really prefer to use Gimp and the xsane plugin rather than simple scan ..
I run an old Toshiba Satellite M35x S114 Laptop with Debian Testing, it always runned smoothly - although it IS testing . Since the latest update to kernel 2.6.32 , the X server just freezes. The init goes all the way to gdm, and then a blank screen , no mouse pointer, no way to get out of this screen (not CTRL+ALT+BACSPACE not CTRL+ALT+F1 / F2 ... etc) just a hard reset.
I can boot to the older .30 kernel with absolutely no problem, gdm starts normally login successfull (as I am able to write this on the reffered machine and all).
Here comes the gory details:
>>> The graphic card: lspci | grep gra 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) >>> When it works with .30 kernel: cat /var/log/Xorg.0.log code....
Noting that there are no more Modlines in the new Xorg.0.log
Besides, X is disabling the mouse and keyboard in the configuration.
I've run into an issue that I'm not sure how to address. I'm running Squeeze and upgraded my system this morning.
The packages upgraded were:
About 10 seconds after upgrading, the system froze completely and I had to do a hard restart. The system froze again 10 seconds after the bash login prompt was displayed (I'm not using a display manager) after reboot. The source of the problem appears to be my Realtek 8192SE wireless driver. I was able to boot the kernel in recovery mode and uninstall it, which has fixed the issue. Rebuilding the driver causes the problem again.
I suspect that something to do with the sysv and init packages affected the driver in this way, but I've no idea where to start in trying to fix this. I can't imagine this is a fault of the Realtek driver as it worked just fine up until this point.
I can't use the webcam with skype. I followed the instructions on the SDB Skype page of opensuse.org. I can make calls and recieve calls, but there is no video option. Sound isn't going either way during the calls. In Skype's options menu, there is a place to test the video. When I click on the "Test" button, Skype freezes and eventually the terminate application window comes up. The webcam is a Logitech that works fine in Cheese, and I've used it with previous versions of Opensuse and Skype. The only skype available that I've found is the 2.1 beta version, so that's what I'm using. I'm using Opensuse 11.4 with KDE4.
