Configuration :: Newest Upgrade Of Debian Testing Breaks Nvidia And Xorg / What's Going On?
Jul 1, 2011
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
View 14 Replies
ADVERTISEMENT
Sep 29, 2015
While trying to solve the problem indicated in another thread [URL] .... I realised that I do not have the file /etc/X11/xorg.conf.
Also, if I enter the command Code: Select allsudo kate I get
Code: Select allcannot connect to X server :0
I tried logging in to another terminal (tty3) and entered
Code: Select allstartx
Kate opened normally with root permissions.
Currently I have a Nvidia card but I am using nouveau drivers.
My question is: installing the Nvidia drivers (following the guide in [URL] .....) would fix these Xorg issues?
I had troubles with nvidia drivers in other distros....
View 2 Replies
View Related
Jun 6, 2011
After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.
View 9 Replies
View Related
Jan 29, 2011
Could someone give me the steps to installing/enabling the newest Flash 10 in Debian Testing/Squeeze?I want to install via the steps one would do from Adobe's website.IT DOES NOT WORK.IT DIDN'T WORK FOR ME.I just want to install the routine way that is usually done in Linux but when I downloaded it, I was asked to extract it and I have no idea where it got extracted to.Can anyone help?I don't mind starting from scratch.I don't remember how to do this method.I'm used to the 'non-free' package in the repo but Flash 10 is no longer working so I want to use the 'sure' method.
View 5 Replies
View Related
Feb 7, 2010
Arch linux 32-bit AMD 2400XP, ATI Radeon 7500 Graphics Just did a system upgrade which included xorg-server being upgraded to version 1.7.4.901 This seems to have broken the "radeon" driver--I get a very dim green screen. I have now got the system running with the vesa driver.
Google shows that there is a known issue here, but I did not see my exact symptoms or a cure.
View 10 Replies
View Related
Apr 1, 2014
I am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove):Â subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: Â xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
View 6 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Jul 19, 2011
I've just installed Lucid Lynx on both my machines in the interest of sitting and waiting for the Unity/Gnome 3 storm to blow over. On the HP (see below), everything works great, and I've followed instructions online on how to upgrade to LibreOffice, upgrade the kernel to 2.6.38 using the kernel PPA, etc.
However, on the IBM, I'm using Nvidia proprietary graphics drivers. These work well on the stock kernel that 10.04 installed (2.6.32-32), but installing 2.6.38 seems to break the driver. If I install the driver first, and then the kernel on top, X stops working and I have to revert to the default, generic driver to get back in. Once there, I cannot install the driver again. The Additional Drivers dialog goes through the motions, but then drops a "systemerror: installarchives() failed" error message.
So, is there a different version of the driver I should be trying to install? I should clarify at this point I tried all three options the Additional Drivers dialog provided me, all gave the same result (version 96, version 173, and version current).
Or should I leave the kernel at 2.6.32? Is there any downside to leaving it?
View 7 Replies
View Related
Apr 5, 2011
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
View 11 Replies
View Related
Jun 5, 2010
Upgraded from 13.0 to 13.1 following the instructions. Downloaded latest nvidia package (NVIDIA-Linux-x86-96.43.16-pkg1.run) for my geForce4 MX 4000. Compiled and installed new module (old one was 96.43.13).
Xorg fails to start with this:
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux mercury 2.6.33.4-smp #1 SMP Wed May 12 21:39:37 CDT 2010 i686
Kernel command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 3
Build Date: 05 May 2010 01:54:53AM
Current version of pixman: 0.16.6
Before reporting problems, check [URL]
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.....
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80a1e6b]
1: /usr/bin/X (0x8048000+0x57b75) [0x809fb75]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe40c]
Segmentation fault at address 0xc
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
The "nv" driver works.
View 4 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Aug 1, 2010
Enabling kernel modesetting on my computer breaks graphics, but Xorg.log and syslog don't tell me much, because they don't log any error.
The symptoms are the following: boot goes on normally, then the KDM login screen is corrupted. On the login screen there is a big square instead of the cursor, and that square does move as I move the mouse. If I press Ctrl+Alt+F1 I'll get a black screen instead of the terminal, and from there I cannot go back to virtual terminal 7 for login. The only thing I can do is to issue sys-requests for read-only remount and reboot.
Where could I start looking for the problem? What does it seem to be related to, Xorg, kernel, radeon driver?
View 3 Replies
View Related
Jul 25, 2011
I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.
The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.
The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the
service vboxdrv stop
rmmod vboxpci vboxnetadp vboxnetflt vboxdrv
lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.
View 3 Replies
View Related
Jan 22, 2010
I upgraded testing today on my intel laptop. During the upgrade I got the message that the new kernel would require additional firmware, see attached. Is the solution for this to install the driver from Realtek? [URL] If so, the instructions said to check if the driver was already installed, but what does the output below mean?
conor@con-u3s:~$ lsmod | grep r8169
r8169 27596 0
mii 4664 1 r8169
View 3 Replies
View Related
Feb 11, 2010
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
View 10 Replies
View Related
Feb 7, 2010
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
View 5 Replies
View Related
Oct 21, 2010
I get the following on startup:
(==) Log file: "/var/log/Xorg.0.log", Time: xx
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
[Code].....
My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.
View 14 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
Mar 11, 2011
After trying to use the safe-upgrade command with aptitude, I receive these errors:
apt (0.8.11) unstable; urgency=low
apt-get install pkg/experimental will now not only switch the candidate of package pkg to the version from the release experimental but also of all dependencies of pkg if the current candidate can't satisfy a versioned dependency.
View 2 Replies
View Related
Aug 4, 2011
I want to have most my system in Debian Stable and a few packages updated to a version that is not in Stable repos.For example Abiword. With the one in Debian Stable I have many issues.I could add Debian testing repos and update it, but then I will have to upgrade to testing a lot of programs that I didn't intended to upgrade.ex: Abiword in testing may requiere libc6(testing) and with that I would have to upgrade a lot of programs that will not work with a newer version of libc6.
View 4 Replies
View Related
Nov 8, 2015
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
View 2 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Feb 26, 2010
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
View 1 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Feb 17, 2011
I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.
Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.
View 1 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Mar 2, 2009
I just got a set of updates from Xorg11 (Index of /repositories/X11:/XOrg/openSUSE_11.1/i586) repository and now, my X doesn't come up. During update, zypper complained about xorg-x11-libxcb and it didn't get updated. On further investigation I noticed that libxcb-xlib.so.0.0.0 is missing in the new package (version 7.4-4.2. The one currently installed in 7.4-1.24).
View 9 Replies
View Related
Jun 19, 2011
I'm running debian 2.6.32-5-amd64 and have spent an interesting day trying to get nvidia-glx running...What appears to be happening, is that installing nvidia-glx uninstalls X.I've tried various installation methods (Synaptic, apt-get, module-assistant) and the final result seems to always be /usr/bin/X not found.Re-installing X blows away nvidia-glx.The symptoms look a lot like this post: viewtopic.php?f=7&t=45188Is it possible that this problem has returned?
View 10 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
May 25, 2010
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
View 8 Replies
View Related
