After each boot I find 2 occurrences of WARING! Can't find hypervisor information in sysfs!
in /var/log/boot. This box is running as KVM-host, so I am a bit worried about 'warings' like these...
I installed a new squeeze serverXen Hypervisor runs the server as Dom0 anda virtual Windows XP.The server runs samba, postfix, dovecot, squid, cups and hylafax with a Frritz ISDN card (module fcpci.ko).The used memory of Dom0 rises slowly (about 5MB /h) until the system crashes.As a workaround i installed a reboot every 24 hours.htop shows normal behavior.The system is already in production, so i can't stop services to track this bug.I need some hints how to debug the running system to find out, where the memory gets lots.
View 3 Replies View RelatedRunning AQemu says me the following:
Could Not Get USB Information From System!
USB Support is Disabled.
Add Support proc FS TO YOUR Kernel.
i followed a Tutorial about configuring apache to have HTTPS Protocole , but since i ask for a certificate , i can't input information such country code etc , i'm runing this configuration on Webmin , i'm using Debian of course so how can i input the code ?
View 1 Replies View Relatedi recently started sockets programming. In the process i began to look for relevant network information about my computer and realized that ifconfig wasn't displaying the same information that resides in my /etc/network/interfaces file. On the interfaces file my IP address is 192.168.1.109 for interface eth0 but ifconfig displays 192.168.1.101. I was under the impression that ifconfig got its information from the interfaces file but clearly doesn't. I tried re configuring the device with ifconfig and then disabling and re enabling the device with ifdown and ifup so that the device updated its information but it didn't.
[Code]....
I'm running the current release of Debian with the 2.6.26-2 kernel. This is an upgrade from an older (2.4 kernel) series redhat release. One of the things I had working in the older system was a dns server with accompanying monthly update of the root hints file. I tried working through a dns how-to to set this up again, but it seems much has moved around since I last played with this. All of the files listed in the how-to are not where it says they should be. I am looking for a better reference on keeping the dns server running with current server information.
View 1 Replies View RelatedAs title says, running unetbootin throws this error [URL]...... I can easily find the files myself (go to synaptic > look at installed files > scroll down) and I can't remove/purge because they would require me to remove some important software (XFCE).
FIX: Required some more 32 libraries.
I have been getting some compile errors here and there and have read that possibly I need to install the kernel-devel package.I am running 2.6.33.4 which I built from source.I have also built and installed the kernel-headers.I cannot find the kernel-devel for 2.6.33.4 anywhere, can I build it myself from the kernel source?
View 2 Replies View RelatedI have installed dhcp3-server via apt-get install dhcp3-server, but I couldn't find any initscript. So, how can I start and stop it properly ?
For now , I have added "dhcpd" line in rc.local.
I bought a bluetooth pen, I connect it via USB, my bluetooth connection is active but I can't find other therminals, and my debian machine it isn't visible to other terminals.
It seems that my bluetooth connection works, but it can't pair other terminals. I want to connect bluetooth speaker, but it seems impossible.
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
Trying to build a driver for a TV tuner card. When I enter 'make menuconfig', I get this error:
make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'
/lib/modules/2.6.32-5-amd64/source/scripts/Makefile.build:44: /lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile: No such file or directory
make[3]: *** No rule to make target `/lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile'. Stop.
make[2]: *** [scripts_basic] Error 2
Suspect I need another package in addition to linux-headers.
Running Squeeze, amd64, KDE.
i'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?
View 1 Replies View RelatedI'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.
I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0
[Code]...
I'm attempting to install ndiswrapper-dkms package. The installation fails due to the following error:Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. dpkg reports that the source is installed
[code]....
I've been searching google for the past couple of days but haven't found anything specific. Any ideas to get me going in the right direction?
uname -a reports
Linux debtop 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 GNU/Linux
I am using Debian testing i386. Just upgraded to 2.6.39-2-686-pae. After reboot, and ever since, I am getting warning: WARNING: Could not find hdaps input device (No such file or directory). You may be using an incompatible version of the hdaps module. Falling back to reading the position from sysfs (uses more power). Use '-y' to silence this warning.
View 1 Replies View RelatedI've followed the guide at URL.... but my computer is unable to find any Bluetooth devices. Whether I'm using the command line or gnome-bluetooth, I don't get any results. If I plug in a cheap USB adapter, I'm able to connect and use the devices.My computer is a HP ProBook 4330s running Debian Jessie. And as far as I can tell the Bluetooth adapter is a Ralink rt3592 combination Wi-Fi and Bluetooth PCI card. The Wi-Fi works fine, but when i try to connect to a Bluetooth device, I get no search results.
View 9 Replies View RelatedI'm trying to use module-assistant to add the vboxdrv using instructions also found here in the debian forum. However, m-a can't find the linux-headers because it looks for the package linux-headers-2.6.32-5-trunk-686. I attempted to specify were the headers were by using:
m-a prepare --kernel-dir /usr/src/linux-headers-2.6.32-5-686/
but also doesn't work. Instead, I get the error:
Bad kernel version specification at /usr/bin/m-a line 566.
Anyone knows how to work around this?
By the way, the reason I am doing this is because when I installed virtualbox (following the instructions in debian wiki) there's no vboxdrv. When I try to modprobe it, I get:
FATAL: Module vboxdrv not found.
I have a computer with internet access with amd64 architecture running Debian stable (Lenny). I have another computer with NO internet access with i386 architecture running Debian stable (Lenny).I want to download some packages for the i386 computer using the amd64 computer. So far, the only way I can see to do this is to use dpkg-architecture to temporarily change to i386 on the internet computer, run aptitude with the download-only option to retrieve the packages I need with all suitable dependencies, then switch the internet computer back over to amd64.
I can't imagine I'm the only person who ever needed to do this, and yet I've had no luck finding any advice. The method I described seems rather awkward - is there a more elegant solution?
I apologize to the membership, I realize now the absurdity of this subject. Having now studied the online repository search functions closer, I see it appears packages are automatically retrieved with all necessary dependencies. As such, it is not necessary to use apt and its various functions to do the job.
I am currently using Debian Lenny and am having problems with my pptp vpn client. I can use the following software for as long as I like without my pptp vpn connection dropping out:
(1) iceweasel
(2) icedove
(3) gtk-gnutella
If a use a bittorrent client, however, my pptp vpn connection drops out within a few minutes. I have tried these bittorrent clients: transmission, deluge, tixati. Enabling or disabling the firewall makes no difference.I have searched pptpclient.sourceforge.net and Debian User Forums but have not been able to find any suggestions on settings to change in a bittorrent client.
I need to make a validation before start my application, so I read the Hard Drive serial from the /sys directory (sysfs).
So I was thinking if there is someway to star Linux without the /sys (sysfs) and put manually some files, and override the real hard disk serial.
Question? Where can I find information about copyright?
A real state agent took one of my pictures from facebook to use it for his bussiness. He charges 2.5% for marketing.
Is there a way to find out information about a process based on the command used to run it?
Ideally I would like to get processes ID %CPU and memory usage back. I have written a short shell script which does this but I wonderd was there a command that did this.
Here's my shell script
Code:
#!/bin/bash
ExpectedArgs=1
ARGS=$#
if [ $ARGS != $ExpectedArgs ]
[Code]....
I randomly get system crashes of a fresh Fedora 15 install.
I cannot reproduce, however.
Where would I find information on system crashed (kernel panics)?
Where can I find comprehensive information on optimizing Linux? I keep searching online but seem to get only to performance monitoring. I don't want to run a lighter version of Linux or upgrade my hardware! Just want to get my current distro and future ones I might install to run at its best.
View 8 Replies View RelatedWhen I try to hit my jsp pages all that gets displayed is the source code.I cannot find any log files that give me any information. It seems as though apache is not forwarding requests to tomcat6 but I cannot verify this. I need some direction on what is happening here. I'm lost and have run out of options.Would JAVA classpaths cause this type of behaviour if they are wrong?
View 2 Replies View RelatedHow do you setup Secondary or Slave Servers in NIS? Will the domain of the slave server be the same as the Master Server?
View 1 Replies View RelatedThe default Emacs on Mac OS X, 22.1, appears to have some problems with the info/help stuff.
When you hit C+h i, it says:
Can't find the Info directory node.
It works in AquaEmacs, but I downloaded the 23 version of emacs precompiled binaries from here and I still have the same problem.
how to find the only particular user (usage) of memory information
View 6 Replies View RelatedAll routing settings made with the ip tool (route command) are lost when the redhat server reboots.How to save routing information to a configuration file?
View 2 Replies View Related
