i followed a Tutorial about configuring apache to have HTTPS Protocole , but since i ask for a certificate , i can't input information such country code etc , i'm runing this configuration on Webmin , i'm using Debian of course so how can i input the code ?
View 1 Replies
Running AQemu says me the following:
Could Not Get USB Information From System!
USB Support is Disabled.
Add Support proc FS TO YOUR Kernel.
After each boot I find 2 occurrences of WARING! Can't find hypervisor information in sysfs!
in /var/log/boot. This box is running as KVM-host, so I am a bit worried about 'warings' like these...
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View Relatedmy thinkpad Edge 11 has some problems with the touchpad and the trackpoint, so i want to permanently disable the touchpad, but not the TrackPoint. Both are PS2 devices.
/dev/input/mouse0 --> TouchPad
/dev/input/mouse1 --> TrackPoint
How can i disable the device? In X it does not work with gpointing-device-settings
i recently started sockets programming. In the process i began to look for relevant network information about my computer and realized that ifconfig wasn't displaying the same information that resides in my /etc/network/interfaces file. On the interfaces file my IP address is 192.168.1.109 for interface eth0 but ifconfig displays 192.168.1.101. I was under the impression that ifconfig got its information from the interfaces file but clearly doesn't. I tried re configuring the device with ifconfig and then disabling and re enabling the device with ifdown and ifup so that the device updated its information but it didn't.
[Code]....
How to hardcode/fix a udev roule for /dev/input/event0?For example my touchscreen device jumped after restart, sometimes will be recognized as input3 and sometimes as input0.
I: Bus=0003 Vendor=1fd2 Product=0064 Version=0100
N: Name="LG Display LGD-MultiTouch"
P: Phys=usb-0000:00:1d.7-4.1/input0
[code]....
I am using Debian testing i386. Just upgraded to 2.6.39-2-686-pae. After reboot, and ever since, I am getting warning: WARNING: Could not find hdaps input device (No such file or directory). You may be using an incompatible version of the hdaps module. Falling back to reading the position from sysfs (uses more power). Use '-y' to silence this warning.
View 1 Replies View RelatedI'm trying to make a script that loads at boot and asks for user input before doing it's stuff. So I created a script in /etc/init.d/ following the example given there (skeleton file) and used update-rc.d to make it load before GDM.
But when my script requests user input, init doesn't stop, and goes on loading other services and loads GDM. I have to CTRL+F1 to get to my script. I want my script to pause the init system till it ends doing it's stuff and the the other services can go on loading.
I tried
#X-interactive: true to no avail.
A tiny Linux kernel patch that makes the desktop incredibly more responsive: [URL]...
View 14 Replies View RelatedI want to get the hardware information in linux. As in windows we can have API to get the network adapter information and all. But in linux why dont we have? i try to read network adapter info in /proc/bus/devices file.. but that file is very hard to parse.and i looked at the lspci source c ode. but unfortunately I dint undersatnd that code to get the network adapter information.
View 1 Replies View RelatedI'm booting a usb stick with a custom initrd.gz, which contains a preseed.cfg at /. This preseed.cfg has the following initial lines:
d-i debian-installer/language string en
d-i debian-installer/country string BR
d-i debian-installer/locale string en_US.UTF-8
But the installer keeps asking for language/country/locale.
I'm running the current release of Debian with the 2.6.26-2 kernel. This is an upgrade from an older (2.4 kernel) series redhat release. One of the things I had working in the older system was a dns server with accompanying monthly update of the root hints file. I tried working through a dns how-to to set this up again, but it seems much has moved around since I last played with this. All of the files listed in the how-to are not where it says they should be. I am looking for a better reference on keeping the dns server running with current server information.
View 1 Replies View RelatedI am learning japanese and I would like to be able to switch between english and japanese input while keeping an english interface. How would I achieve that? I am using KDE, by the way.
In the Kiten documentation I read that pressing Shift+Space would enable japanese input (built-in in Kiten, according to the documentation). But that does not seem to work in my system.
How do you setup Secondary or Slave Servers in NIS? Will the domain of the slave server be the same as the Master Server?
View 1 Replies View Relatedi installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
All routing settings made with the ip tool (route command) are lost when the redhat server reboots.How to save routing information to a configuration file?
View 2 Replies View RelatedWe do have primary & backup DNS both are running in Linux. I'm planning install the 3rd DNS & move the DNS02 to this server(DNS03)& remove the DNS02 later. Ho can I do move all the information & configuration of DNS02 to the new server? configuring the DNS03 & removing DNS02.
View 13 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Why can't Ubuntu store configuration information in a way that it wouldn't need to be clobbered in order to apply security updates? For example, this mornings updates told me I had to choose between using a new version of smb.conf that's part of the security patches, stick with the old version, or let the update installer merge them. Of course, the first two choices have obvious drawbacks: why should I have to choose between losing all my SMB settings or refusing security fixes? So I chose the merge, which came back with "Conflicts found during three-way merge! edit `/etc/samba/smb.conf' and sort them out manually."
View 5 Replies View RelatedI updated my ubuntu recently but I found out that mupen64plus does not longer include a GUI. I have tried to configure my joystick with the instructions on their website but I didn't have an InputAutoCfg.ini file, although I created it and put the text in it but it still doesn't work?
View 3 Replies View RelatedI'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?
View 1 Replies View RelatedI'm looking for a program like "Hide My IP" (which is for Windows) which I can use to change my IP address to that of one in another country. I'm from the Netherlands and live in the US which makes it impossible on a lot of Dutch television network websites to watch programs because a lot of those are viewable in the Netherlands only. I understand there are some web-based sites that can do that, but I was hoping there is actual software out there? I'm using Ubuntu 10.04 LTS.
View 7 Replies View RelatedI receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
I have been having trouble installing some programs because of some dependency resolution errors. Sometimes I can work around it, and sometimes I can't.
The problem is that it looks for a package named in a different way or something.
Currently, I'm having problems installing "evolution-data-server" from source. It gives an error during configuring that says "libdb" can't be found, but I do know I have it installed.
I'm giving "reseting the repos" a shot because this might solve everything else. Basically, what I want to happen is that the package manager, and the repository list, would be back to "normal", the state where it's as if I just installed F13.
Here are screenshots of my repo list
It's tiring sorting out dependencies manually. Plus, there are no guarantees that I can have a successful installation.
Fedora 12, ath5k, used #iw reg set DE to enabled channel 12 and 13 for wireless.
But every time reboot the setting will get lost and reset to US.
Where is the best place to set this permanently?
I have a VPS. I intend to use it as a squid server. I need to know how to configure Squid so it works as a simple proxy server. Don't need authenication etc.
View 1 Replies View RelatedI just installed debian and I need to know where I can find information about my current installation is it x32 or x64. I an sure that my current hardware is x64 but I'd like to know the current OS type.
View 1 Replies View RelatedI have shotucast server on my debian server it works perfect, but i can't get shoutcast information on web i'm using PHP script With script everything is OK. With shoutcast to. But i don't understand, why my php script is showing server is off
View 1 Replies View RelatedBrowsing thru the dmesg output, I saw this:
cfg80211: Calling CRDA for country: MX
cfg80211: Regulatory domain changed to country: MX
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[code]....
Wireless works fine, but I'm not currently in Mexico, so where is this coming from?
