My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?
View 7 RepliesI am using a 3rd party kernel driver that does not support udev properly. When I was using wheezy I placed the required device files in /lib/udev/devices.
The udev in jessie does not appear to support this. Is there any way to have udev create these device files or will I have to create then using a script at boot-up?
I moved to static Ip method for my laptop. I edited the interfaces file and it seems to work since I am writing this message from that laptop, but I have a new problem with my Debian. The mounts are not mounted during the startup anymore. Before I was using the network manager method and the nerwork mounts were all fine. Now with this method, they are not mounted and I need to mount them by firing "sudo mount -a" manually.
View 2 Replies View RelatedI run a program (findknxusb) to scan for devices on USB, but the device is not found.
The debugging level for libusb is on:
$ ./findknxusb
Possible addresses for KNX USB devices:
libusb_set_debug...
libusb: setting debugging level to 1 (on)
libusb_init...
[Code]....
I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?
View 2 Replies View RelatedI have a Dell PowerEdge SC430, Squeeze 6.0.2 box, Broadcom NetXtreme NIC which works fine DHCP. The network-manager package is not installed. I have now reconfigured /etc/network/interfaces for a static IP:
auto eth0
iface eth0 inet static
address 192.168.1.2
[code]....
I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11abg ESSID:"Tell My Wifi Love Her"Â
     Mode:Managed Access Point: Not-Associated  Tx-Power=200 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
     Power Management:off
    Â
lo    no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev
[code]....
And still, "no wireless networks found" in Wicd.
using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)
View 11 Replies View Relatedsetup my static network connection Here are my details :
IP : 172.16.152.137
Subnet : 255.255.255.192
Gateway : 172.16.152.191
Primary DNS : 172.16.0.1
[code]....
but after this setup when i restart my network #service network restart while bringing up the eth0 the following message is displayed before [OK] - RTNETLINK answers : Invalid Argument now it seems either this setup is wrong or not sufficient to set up the connection, whenever i try to ping 172.16.0.1 it showing connect : Network is Unreachable
The wireless network on my laptop is configured with a static IP. (not using nm). When I take the laptop out of the range of my wireless router the essid is becoming off/any therefore when I'm back in range the connection is not reestablished and to re-enable the connection I gotta do "iwconfig wlan0 essid <essid name>" otherwise there is no connection. Make sure that essid stays configured unless I manually want to change it?
View 1 Replies View RelatedOur network uses static ip's and I cannot get them to work with Debian live. In fact, when I reboot, it always goes back to "roaming". What am I doing wrong here?
View 7 Replies View RelatedI am trying to set a static IP for my wireless adapter (wlan0). I've been getting the error
Code: Select all[....] Reconfiguring network interfaces.... Error for wireless request "Set Encode
" (8B2A) :
  SET failed on device wlan0 ; Invalid argument.
RTNETLINK answers: File exists
Failed to bring up wlan0.
Done.
After using the command
Code: Select allsudo /etc/init.d/networking restart
Here is what etc/network/interfaces looks like
Code: Select allauto lo
Iface lo inet loopback
auto eth0
Allow-hotplug eth0
Iface eth0 inet manual
Auto wlan0
Iface wlan0 inet static
Wireless-essid xxxx
Wireless-key xxxx
Address 192.168.3.116
Netmask 255.255.255.255
Gateway 192.168.3.0
I am trying to set up a static IP for the pi.
Code: Select allcat /etc/network/interfaces
this should bring up something like iface eth0 inet dhcp
I installed Lenny for my new server and set a static IP the usual way:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
I'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
I use a static compiled kernel and a fully encrypted disk apart from a boot partition. I have recompiled and installed kernels many times. When I tried with the latest kernel from Testing, 4.2.6, the system will not boot. Not only that but the previous kernel now does not boot. However, a stock modular kernel does boot. The static kernel hangs at:
Code: Select allVolume group "dk" not found
Cannot process volume group dk
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad. Falling back to internal scanning.
Reading all physical volumes. This may take a while...
/run/lvm/lvmetad.socket: connect failed: No such file or directory
[Code] ....
And after giving the password the boot continues successfully. How to diagnose it further?
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
[code]....
I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?
I tried with other kernel - 2.6.35 and 2.6.34
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
My father has configured his network and the computer has connected to the wired network. The problem is firefox says the server cant be found at the given address. The wired router says its connected to the network and yet firefox doesn't see the router admin page or network.
View 3 Replies View RelatedI install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies View Relatedmy system keeps on telling me about an error:
Code: Select allsudo journalctl -p 0..3
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime1.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime2.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime3.ptb.de
A quick check
Code: Select allsystemctl status ntp.service
ntp.service - LSB: Start NTP daemon
  Loaded: loaded (/etc/init.d/ntp)
 Â
[code]...
3 packets transmitted, 0 received, 100% packet loss, time 1999ms.Same result when using the standard Debian ntp time servers like "server 0.debian.pool.ntp.org iburst" in /etc/ntp.conf.
Installed linux-image-2.6.32-bpo on my laptop today and after the reboot i got "no operating system found" . I'm now typing using a Puppy live cddrom .
View 3 Replies View RelatedI'm setting up the Squirrelmail | impad | sendmail combination and so far everything appears in order but I'm getting a 'mailbox not found' error when I log into Squirrelmail. I've eliminated Squirrelmail by using another imap client (Mozilla Thunderbird) and getting the same error. It seems that the problem is with imapd.I've checked the logs and I can see only the successful login entries. Nothing else:
May 5 10:30:19 altair cyrus/imap[2602]: executed
May 5 10:30:19 altair cyrus/imap[2602]: accepted connection
May 5 10:30:19 altair cyrus/imap[2602]: login: localhost [127.0.0.1] john plaintext User logged in
[code]....
After the successful installation of debian squeeze 32 bits from the first dvd, I proceeded to try to install the package noip2, but my surprise was not in the repositories that I have, but when used lenny if I had it.Below show my repositories:[URL]I dont know if i need another repository or i am missing one
View 1 Replies View RelatedDebian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem   Size Used Avail Use% Mounted on
/dev/sda1Â Â Â Â 81GÂ Â 27GÂ Â 50GÂ 35% /
devtmpfs     16G   0  16G  0% /dev
tmpfs      16G  76K  16G  1% /dev/shm
tmpfs      16G  18M  16G  1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem            Size Used Avail Use% Mounted on
/dev/dm-0Â Â Â Â Â Â Â Â Â Â Â Â Â 907GÂ 6.6GÂ 855GÂ Â 1% /
udev                10M   0  10M  0% /dev
tmpfs               995M 9.2M 986M  1% /run
tmpfs               2.5G  76K 2.5G  1% /dev/shm
tmpfs               5.0M 4.0K 5.0M  1% /run/lock
tmpfs               2.5G   0 2.5G  0% /sys/fs/cgroup
[code]...
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies View RelatedThe computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link
[code]...
That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?
I newly installed Debian 6.0 I choose for the 2.6.32-5 686-bigmem kernel because I have 6Gb of RAM Now I want to use Cool n Quiet When I try to do modprobe powernow-k8 I get a 'no such device' message I have an Athlon64 X2 6000+ cpu. Am I using the correct kernel for this?
View 1 Replies View Related