Debian Configuration :: Missing CD / DVD Device In Squeeze
Apr 3, 2010
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies
ADVERTISEMENT
Feb 11, 2011
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.
View 5 Replies
View Related
Jun 3, 2011
I had installed ssh but something went wrong and I uninstalled it. I removed the SSH configuration files by hand (I deleted all /etc/ssh folder).After ssh installation (I mean apt-get install ssh) I noticed that I have no SSH configuration files.I tried apt-get install openssh-server but i still have no SSH configuration files.
View 2 Replies
View Related
May 29, 2010
so I just installed Squeeze Alpha1 amd64, dual boot with MS Vista using Grub. Everything seemed fine, but I'm apparently missing about 40GB of space. It should be set up as so:
101GB NTFS /dev/sda1 - Vista
12GB NTFS /dev/sda2 - HP Recovery
45GB ext3 /dev/sda3 - / Debian squeeze
[code]...
View 5 Replies
View Related
Jul 6, 2010
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
View 14 Replies
View Related
Feb 8, 2011
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
View 1 Replies
View Related
May 4, 2010
Yesterday I installed debian squeeze and inside appearance preferences there are: theme, background and fonts tabs but the interface tab is missing. What do I need to install in order to have this missing tab?
View 2 Replies
View Related
Feb 8, 2016
Looking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
View 6 Replies
View Related
Mar 5, 2011
I have so far used reiserfs formatting both in my previous debian (sarge, etch and lenny) and opensuse (SLED10, opensuse-10.2,10.3 &11.3) and was very happy. When last month I installed debian squeeze I missed reiserfs (or did I miss noticing it?) Though Ext3 is giving me no trouble. I would love to have reiserfs. Is it now possible to change the filesystems without much trouble.
View 5 Replies
View Related
Mar 25, 2011
I tried to install Squeeze on a new laptop. The installation finished and I was able to log in, but a significant number of packages were missing, including network-manager and network-manager-gnome, OpenOffice, and gdebi. Everything under the System | Administration menu except Login Screen was missing. There's probably more missing, too, but I am not sure how to tell.
It happened a few times but with slightly different results (e.g. I think on one of the earlier install attempts, Iceweasel didn't get installed, but it was included in the most recent attempt). I tried installing using 6.0.1's CD 1, and 6.0.0's hybrid Live image on a USB stick (in both cases, the GNOME version). I had used the same USB stick to install Squeeze successfully on another laptop last week (i.e. I successfully got a complete, working install; I made no changes to the USB stick; then tried to install using it on this new laptop, and saw this behavior).
I tried using both the graphical and text installers. At the step asking what packages you want installed (which allows you to auto-install sshd or mail server, for example), each time I made no changes, so the 3 selected default settings (the first option, Desktop Environment, and the last 2 options, laptop and... whatever the other one is, I don't remember) should all have been installed.
I didn't use the net installer, and I ran the installer offline because both laptops require non-free firmware and I couldn't figure out last week how to get the installer to find that firmware (on another USB stick). So once I got to the GNOME desktop the most recent time, I copied the WiFi chip's firmware .deb onto the laptop and did a 'dpkg -i', then did the same thing to get network-manager-gnome and its dependencies installed; and once I connected to our network I started an 'apt-get install gnome' to try to get the entire desktop environment installed (that also installed the programs that show up under System | Administration).
Is there anything important I might still be missing? Is there a list of installed-by-default packages that I could compare against say a 'dpkg -l'? Does this sound like some sort of known issue?
View 3 Replies
View Related
Mar 1, 2011
I try to setup OpenLDAP on Debian Squeeze.But it seems the documentation I found is differed than the installation.
Normally I would expect /etc/ldap/slapd.conf as also mentioned at url.However this file does not exists and I got the feeling Debian changes a lot with the default (bit poor if you asked me).Seems they created a LDAP database and put the config in there, correct me if I am wrong?A folder /etc/ldap/slapd.d is created with some config inside. And also a /etc/ldap/ldap.conf does exist.
Is there any documentation on this, and what if I would like to have a flat config in /etc/ldap/slapd.conf?
View 4 Replies
View Related
Jul 22, 2009
About a month ago I upgraded from Lenny to Squeeze and everything seemed fineBut sometime between then and now I lost the maximize and close buttons (I still have the minimize)This is only a minor annoyance for me but a major one for my wife.I searched the web and some other forums but have found no help.
View 3 Replies
View Related
Feb 19, 2011
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies
View Related
Apr 5, 2011
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies
View Related
Aug 28, 2011
When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
View 2 Replies
View Related
Feb 15, 2010
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies
View Related
Jun 20, 2010
When I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies
View Related
Oct 19, 2010
Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies
View Related
Oct 21, 2010
I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
View 8 Replies
View Related
Dec 20, 2010
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
View 14 Replies
View Related
Feb 6, 2011
I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-
[code]...
View 10 Replies
View Related
Feb 6, 2011
As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0
View 9 Replies
View Related
Dec 14, 2010
A couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.
Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.
View 4 Replies
View Related
Apr 13, 2010
I have been trying to build a Debian-live-version for some time using live-helper. It works fine if I choose lenny as distribution. With sid I always get into trouble.Sometimes live-helper does't find any aufs-modules but it stops looking for them if I keep the options as simple as above.What is the problem of live-helper's to build on sid or squeeze (which I have met similar troubles with)?
View 10 Replies
View Related
May 28, 2010
Alright, first Squeeze wouldn't create an initial RAM disk even with "--initrd" specified. Now I don't need one and it's creating one for me even though I don't want one! How do I stop this? I'm beginning to feel like I am using Windows in the sense that it's doing things on its own. Don't make me a RAM disk unless I say so!
View 10 Replies
View Related
Jun 16, 2010
I just noticed that I had a sid line on my sources.list, at the end of all squeeze lines, and I've been updating more or less regularly. Does the ordering imply some sort of "preference", so that the first lines are preferred over the subsequent ones, or is it all about the latest version?After removing that line, and taking a look at my installed packages with synaptic, all the "latest versions" of the packages seem to be the ones that are already installed, and I click on properties, and there are no older versions available, only "##.##-### (testing)". Emphasis on "testing", rather than "sid" or "unstable". Of course I didn't check all of them, but about a dozen, and none deviated from that pattern. However, I went to double check on the web pages about the packages, and it seems that many of the squeeze's packages are at the same version of sid. I couldn't yet find one that is not.perhaps the sole fact that the sid line was on sources.list is enough to know that something happened -- as I don't recall having ever set up those configuration files about preferred sources/pins or however it's called), and suggestions on how to proceed? My hunch would be to just downgrade things gradually as they eventually fail (as I did with geeqie, which is why I suspect that there is some mess), but leave everything alone. Not try to fix what is not quite broken. And if it fails too often, go full-blown sid.
View 14 Replies
View Related
Jul 6, 2010
I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused
View 4 Replies
View Related
Aug 22, 2010
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
View 1 Replies
View Related
Dec 3, 2010
I looked into my shell 'profile' on my running lenny and copied the PS1 definition over to my [virtual] new squeeze machine, but astoundingly, the prompt does not change!
The prompt always remains to be like this:${debian_chroot:+($debian_chroot)}u@h:w$
This does definitively not stem from 'profile' and I cannot find, where it is defined and how I can override this. If I do it interactively, in a terminal [terminal running in Gnome], it works like expected. In that script, even if I use 'unset PS1',followed by PS1= ... / export PS1, it does not change,Someone with the knowledge and/or a good idea would be great!
View 8 Replies
View Related
Jan 25, 2011
1st post in Debian Forums, just came from Arch...and segmentation fault and wine are the 2 special reasons for my return, it's a great distro but i miss the stable part of the deal.I'm a performance guy and i want to know what you use for mobile broadband connection (USB Pen) with exception of course of network manager, even with 8GB of RAM to deal with i want to keep my Debian Squeeze simple, better said:netcfg / wicd for networkpptp client for vpn........ for mobile broadband
View 4 Replies
View Related
