Debian Configuration :: Static IP And Network Mounts
Jul 19, 2010
I moved to static Ip method for my laptop. I edited the interfaces file and it seems to work since I am writing this message from that laptop, but I have a new problem with my Debian. The mounts are not mounted during the startup anymore. Before I was using the network manager method and the nerwork mounts were all fine. Now with this method, they are not mounted and I need to mount them by firing "sudo mount -a" manually.
View 2 Replies
ADVERTISEMENT
Oct 11, 2010
My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?
View 7 Replies
View Related
Jun 27, 2011
I have a Dell PowerEdge SC430, Squeeze 6.0.2 box, Broadcom NetXtreme NIC which works fine DHCP. The network-manager package is not installed. I have now reconfigured /etc/network/interfaces for a static IP:
auto eth0
iface eth0 inet static
address 192.168.1.2
[code]....
View 7 Replies
View Related
Apr 7, 2010
Let me quickly state that I am returning to Debian after quite a long break. I am trying to relearn some things. I suppose I'm somewhat old school. As in I originally installed from rawright, back in the days when you had to do practically everything by hand. I was quite happy with config and make. I actually learned a ton back then, as I started out knowing nothing. I guess I can learn to catch up with the modern linux world.
Anyway here is my question? In the old days if I wanted something not to be mounted I would simply comment out the entry in /etc/fstab. I notice that my USB drive is mounted but does not appear in the fstab. It is in mtab, and lsusb does show it.
If I wanted to secure a system, but not totally remove usb support from the kernel, how would I prevent the automounting of USB drives? What are the configuration files that govern their operation?
View 1 Replies
View Related
Apr 27, 2010
setup my static network connection Here are my details :
IP : 172.16.152.137
Subnet : 255.255.255.192
Gateway : 172.16.152.191
Primary DNS : 172.16.0.1
[code]....
but after this setup when i restart my network #service network restart while bringing up the eth0 the following message is displayed before [OK] - RTNETLINK answers : Invalid Argument now it seems either this setup is wrong or not sufficient to set up the connection, whenever i try to ping 172.16.0.1 it showing connect : Network is Unreachable
View 11 Replies
View Related
Jul 1, 2011
I am making backups and I need to make a cron job that mounts a 2nd local hard drive.
It is not listed in my fstab file and I mount it manually in nautilus (having to type a password). It is designated as /dev/sdb1 and /media/repo when it is mounted. Can I get cron to mount it and then add the password or do I have to add it to fstab?
View 3 Replies
View Related
Apr 3, 2011
The wireless network on my laptop is configured with a static IP. (not using nm). When I take the laptop out of the range of my wireless router the essid is becoming off/any therefore when I'm back in range the connection is not reestablished and to re-enable the connection I gotta do "iwconfig wlan0 essid <essid name>" otherwise there is no connection. Make sure that essid stays configured unless I manually want to change it?
View 1 Replies
View Related
Nov 15, 2010
Our network uses static ip's and I cannot get them to work with Debian live. In fact, when I reboot, it always goes back to "roaming". What am I doing wrong here?
View 7 Replies
View Related
Aug 14, 2015
I am trying to set a static IP for my wireless adapter (wlan0). I've been getting the error
Code: Select all[....] Reconfiguring network interfaces.... Error for wireless request "Set Encode
" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
RTNETLINK answers: File exists
Failed to bring up wlan0.
Done.
After using the command
Code: Select allsudo /etc/init.d/networking restart
Here is what etc/network/interfaces looks like
Code: Select allauto lo
Iface lo inet loopback
auto eth0
Allow-hotplug eth0
Iface eth0 inet manual
Auto wlan0
Iface wlan0 inet static
Wireless-essid xxxx
Wireless-key xxxx
Address 192.168.3.116
Netmask 255.255.255.255
Gateway 192.168.3.0
View 7 Replies
View Related
Apr 25, 2016
I am trying to set up a static IP for the pi.
Code: Select allcat /etc/network/interfaces
this should bring up something like iface eth0 inet dhcp
View 3 Replies
View Related
Jun 18, 2010
I installed Lenny for my new server and set a static IP the usual way:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 5 Replies
View Related
Jul 15, 2010
I'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
View 6 Replies
View Related
Dec 7, 2015
I use a static compiled kernel and a fully encrypted disk apart from a boot partition. I have recompiled and installed kernels many times. When I tried with the latest kernel from Testing, 4.2.6, the system will not boot. Not only that but the previous kernel now does not boot. However, a stock modular kernel does boot. The static kernel hangs at:
Code: Select allVolume group "dk" not found
Cannot process volume group dk
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad. Falling back to internal scanning.
Reading all physical volumes. This may take a while...
/run/lvm/lvmetad.socket: connect failed: No such file or directory
[Code] ....
And after giving the password the boot continues successfully. How to diagnose it further?
View 1 Replies
View Related
Sep 9, 2015
I am using a 3rd party kernel driver that does not support udev properly. When I was using wheezy I placed the required device files in /lib/udev/devices.
The udev in jessie does not appear to support this. Is there any way to have udev create these device files or will I have to create then using a script at boot-up?
View 1 Replies
View Related
Jun 6, 2011
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
[code]....
View 2 Replies
View Related
Nov 24, 2010
I have multiple ubuntu machines and I connect to one through an NFS share. I have done this for a few years without issue. However, since re-installing ubuntu and upgrading to 10.4 I have a problem with my system hanging when the remote shares are lost.
Basically, I can power down the machine downstairs, and my main machine then has a fit. I can not open any folders in ubuntu, nor can I shut down. If I try and shut down the system hangs, last time it hung for 8 hours before I had to kill the power.
These are the lines in my fstab
I don't know what I've done wrong, or how I can prevent this from hanging. I have googled the heck out of this as well and can't seem to find an answer either.
View 2 Replies
View Related
Mar 3, 2011
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
View 1 Replies
View Related
Jan 14, 2010
I mount a smb share in suse 11.2 like so mount //ip/share /mnt/point That's fine. It works. A few days later I find all shares I've mounted like that have mysteriously disappeared. I can't find out why, nothing in logs, no obvious causes. When I say disappear I mean its like something did an umount /mnt/point. They no longer appear in the mount list, they are no longer mounted, and I need to type in the mount command for them to come back.
I tend to leave the boxes running until they crash or need a reboot, and always have. This problem I've only seen in 11.2. I have a 11.1 and 11.0 boxes running too, and the mounts are stable on those. I can't find any references anywhere to this behaviour.
View 9 Replies
View Related
Oct 24, 2010
I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.
I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.
The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.
View 5 Replies
View Related
Jul 18, 2010
I'm trying to establish NFS mounts for my SOHO NAS 500 as I used to with other versions of OpenSuse. I go to Yast, I find my SOHO server and my exported directory. I put rw for options and Add it to the list. When I exit I get the following from Yast in a pop up: YaST got signal 11 at YCP file Service.ycp:77/sbin/yast2: line 399: 13095 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS I am not an expert (rather basic knowledge) but this is really cryptic for me. Anyone knows what it is? Of course my mount doesn't work. My newly established system is working fine with 11.3 OpenSuse.
View 1 Replies
View Related
Mar 19, 2011
Is there a way to access remote mount points that were created within the "Places" dropdown or within Nautilus? I haven't been able to locate a mount point for these.
I know I can create a mount point using fstab that will solve my problem but I was hoping for something using these automount procedures as it's really clean.
I just want a way to access these remote shares via terminal when created within Gnome.
View 1 Replies
View Related
Oct 28, 2010
I'm trying to share two folders via NFS. First I share /media/disk/, that works fine and mounts on a remote computer as expected. Then I try to also share /home/Videos/ but when I add this folder to my /etc/exports I can't mount any of the shares. I have tried to both do it on command line and with the Yast tool but the result is the same. I have checked permissions on both folders and they are the same. Also if I try to share only /home/Videos/ it won't mount either. What am I doing wrong?
View 9 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Feb 14, 2011
I have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.
View 1 Replies
View Related
Jan 12, 2010
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
View 9 Replies
View Related
Aug 20, 2010
New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
View 9 Replies
View Related
Jun 16, 2010
All of my USB -- media, flash drives, media players, SD cards -- mount as read-only on my system. Following is a bunch of output from questions I expect to be asked / debug info.
Groups I'm in
gmweezel@computer:~$ groups
gmweezel dialout cdrom floppy audio video plugdev netdev powerdev
DMESG output
gmweezel@computer:~$ dmesg | tail
[17532.047289] sd 13:0:0:0: [sdg] Write Protect is off
[17532.047292] sd 13:0:0:0: [sdg] Mode Sense: 45 00 00 00
[Code]....
View 4 Replies
View Related
Jan 18, 2010
I'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.
I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.
View 9 Replies
View Related
Sep 14, 2010
I've illustrated it on this picture, and hope to get the help i need to set it up... [URL]Thow it has to be furture secured, in that meaning it has to be abel to attach a eth2 on the main server, so i have 3 NIC's.Also, i want to have fully controll over ports, IP/MAC's and data overview (Such as a view of the files beeing downloadet/uploadet).
View 3 Replies
View Related
Apr 9, 2011
I installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies
View Related
