Debian Configuration :: BAR 6: No Parent Found Of For Device?
Oct 5, 2010
I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?
View 2 Replies
ADVERTISEMENT
Oct 5, 2010
I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?
I tried with other kernel - 2.6.35 and 2.6.34
View 10 Replies
View Related
Sep 24, 2010
I run a program (findknxusb) to scan for devices on USB, but the device is not found.
The debugging level for libusb is on:
$ ./findknxusb
Possible addresses for KNX USB devices:
libusb_set_debug...
libusb: setting debugging level to 1 (on)
libusb_init...
[Code]....
View 1 Replies
View Related
Oct 11, 2010
My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?
View 7 Replies
View Related
Jun 1, 2011
I'm in a nested shell trying to use disown to re-root myself as well as a child. Looks like this:
Code:
# echo $$
1234
# disown 1234
disown: job not found: 1234
# disown $$
disown: job not found: 1234
# pgrep mychild
2222
# disown 2222
disown: job not found: 2222
This is in zsh. The goal is to have process 1 (the root of all processes) to become the parent.
View 3 Replies
View Related
Apr 15, 2011
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
View 8 Replies
View Related
May 3, 2011
I keep getting a segfault in compiz. I've tried everything! This is from a fresh install without and accelerated drivers (I have ATI)
Quote:
Code:
**Switching to Compiz window management**
/usr/local/bin/compiz-indicator:99: GtkWarning: Can't set a parent on widget which has a parent
menu.append(kill)
/usr/local/bin/compiz-indicator:100: GtkWarning: Can't set a parent on widget which has a parent
menu.append(start)
[code]....
View 2 Replies
View Related
Jan 25, 2010
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies
View Related
Mar 25, 2016
I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11abg ESSID:"Tell My Wifi Love Her"Â
     Mode:Managed Access Point: Not-Associated  Tx-Power=200 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
     Power Management:off
    Â
lo    no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev
[code]....
And still, "no wireless networks found" in Wicd.
View 12 Replies
View Related
Apr 14, 2016
my system keeps on telling me about an error:
Code: Select allsudo journalctl -p 0..3
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime1.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime2.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime3.ptb.de
A quick check
Code: Select allsystemctl status ntp.service
ntp.service - LSB: Start NTP daemon
  Loaded: loaded (/etc/init.d/ntp)
 Â
[code]...
3 packets transmitted, 0 received, 100% packet loss, time 1999ms.Same result when using the standard Debian ntp time servers like "server 0.debian.pool.ntp.org iburst" in /etc/ntp.conf.
View 13 Replies
View Related
Feb 20, 2010
Installed linux-image-2.6.32-bpo on my laptop today and after the reboot i got "no operating system found" . I'm now typing using a Puppy live cddrom .
View 3 Replies
View Related
May 5, 2010
I'm setting up the Squirrelmail | impad | sendmail combination and so far everything appears in order but I'm getting a 'mailbox not found' error when I log into Squirrelmail. I've eliminated Squirrelmail by using another imap client (Mozilla Thunderbird) and getting the same error. It seems that the problem is with imapd.I've checked the logs and I can see only the successful login entries. Nothing else:
May 5 10:30:19 altair cyrus/imap[2602]: executed
May 5 10:30:19 altair cyrus/imap[2602]: accepted connection
May 5 10:30:19 altair cyrus/imap[2602]: login: localhost [127.0.0.1] john plaintext User logged in
[code]....
View 1 Replies
View Related
Mar 1, 2011
After the successful installation of debian squeeze 32 bits from the first dvd, I proceeded to try to install the package noip2, but my surprise was not in the repositories that I have, but when used lenny if I had it.Below show my repositories:[URL]I dont know if i need another repository or i am missing one
View 1 Replies
View Related
Mar 15, 2016
Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem   Size Used Avail Use% Mounted on
/dev/sda1Â Â Â Â 81GÂ Â 27GÂ Â 50GÂ 35% /
devtmpfs     16G   0  16G  0% /dev
tmpfs      16G  76K  16G  1% /dev/shm
tmpfs      16G  18M  16G  1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem            Size Used Avail Use% Mounted on
/dev/dm-0Â Â Â Â Â Â Â Â Â Â Â Â Â 907GÂ 6.6GÂ 855GÂ Â 1% /
udev                10M   0  10M  0% /dev
tmpfs               995M 9.2M 986M  1% /run
tmpfs               2.5G  76K 2.5G  1% /dev/shm
tmpfs               5.0M 4.0K 5.0M  1% /run/lock
tmpfs               2.5G   0 2.5G  0% /sys/fs/cgroup
[code]...
View 11 Replies
View Related
Apr 3, 2010
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies
View Related
Dec 8, 2010
The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link
[code]...
That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?
View 5 Replies
View Related
Mar 16, 2011
I newly installed Debian 6.0 I choose for the 2.6.32-5 686-bigmem kernel because I have 6Gb of RAM Now I want to use Cool n Quiet When I try to do modprobe powernow-k8 I get a 'no such device' message I have an Athlon64 X2 6000+ cpu. Am I using the correct kernel for this?
View 1 Replies
View Related
Aug 3, 2011
I've recently installed Debian. But the wireless network is not working. In Gnome it says "Device not configured" And if i try a ifup it says: root@accroft-msi:/home/accroft# ifup wlan0Internet Systems Consortium DHCP Client 4.1.1-P1Copyright 2004-2010 Internet Systems Consortium.All rights reserved.
Listening on LPF/wlan0/My mac address here
Sending on LPF/wlan0/My mac address here
Sending on Socket/fallback
[code]....
View 13 Replies
View Related
Oct 26, 2015
I have been following the Xen Beginners Guide here: [URL] .....
Everything was going smoothly until I got to the 'Configuring xen-tools and building our guest' section (two thirds down the page).
I installed xen-tools and then typed the following in a terminal window (as root):
xen-create-image --hostname=development-pv-guest --memory=2048mb --vcpus=2 --lvm=develop --dhcp --pygrub --dist=jessie
I admit PV is new to me, compared to simple HVM, so I have a number of questions:
1. Why the command not found error?
2. Should I be booting from the Xen option or regular boot option at the start up screen when creating the xen image? I've tried both and get the same error message.
3. I have Debian 8 (Jessie) installed on my system and I wasn't sure whether I should therefore make this the guest OS in my Xen PV. In asking this question I'm thinking in terms of HVMs - but I assume my Xen PV needs a guest OS of some kind? Or is my host Debian 8 already acting as a guest OS in Xen PV? I'm confused
4. If I do need to install a guest OS, is it better to go for an earlier version of debian - so as not to be so resource hungry?
I'm nervous about screwing up my host debian installation, so when I got the error message, did some research but found nothing meaningful. I don't want to end up having to reinstall my Debian 8 (base OS) ... again!
View 8 Replies
View Related
May 23, 2010
I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
View 1 Replies
View Related
Sep 1, 2010
I decided to try wireless so I bought a TP-Link pci adapter TL-WN851N and installed it. I installed Wcid and firmware-atheros. I set /etc/network/interfaces to read auto lo iface lo inet loopbackAll Wicd does is tell me "No wireless networks found."
View 14 Replies
View Related
Sep 20, 2010
I just reinstalled debian on my computer, I've had it working for a long time, only difference is I used to have Cable Internet and now I use DSL. Anywho, I reinstalled debian from the kde CD on the debian website, it auto-configured my network out of the box. My network is connected to the computer, pinging google works perfectly, and ifconfig shows that eth0 is working correctly without any errors. However on both Konqueror and Iceweasel, every time I try to connect to a website, it tells me the server cannot be found. Basically it acts like I don't have internet. Using the terminal works though, I have installed KDE-FULL from the terminal and wicd, so I know I do have internet. I don't know what it could be, like I said, I installed from the cd and this happened. Maybe there's a bug on the KDE debian cd
View 14 Replies
View Related
Jun 19, 2015
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies
View Related
Sep 18, 2015
I have a problem activating the hotspot on my debian 8. The issue is that I can't activate the hotspot to give other devices wifi connection.
I have the correct driver packages from the non-free repositories (firmware-realtek) and this service (hotspot) worked fine on distros like Ubuntu, Mint and Fedora .
I tried hostapd but it didn't work. I'm using cinnamon desktop.
View 0 Replies
View Related
Jan 7, 2011
I'm not sure if this is a bug in Squeeze beta 2 or if it's something I've overlooked. I have a Maxtor 250 GB external USB drive that I use for backups. It gets auto-mounted fine, always in the same place, and from my normal user account I can write to it, even delete directories on it if I want to. But when, from Gnome, I select the "Safely remove" option, I get an error to the effect that it can't stop the device. The weird thing is that the thing actually *is* unmounted. I've checked the mount point and it's no longer there.Is there some package I maybe should've installed but haven't? I'm not really worried about data loss, since I'm sure the drive wouldn't unmount unless it was properly synched; it's just the error message that bugs me.
View 2 Replies
View Related
Feb 11, 2011
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.
View 5 Replies
View Related
Mar 23, 2011
I am trying to figure out what needs to be done to automatically set read/write permissions for everyone for my proprietary USB device on system boot. I have created a udev rules file which changes the permissions for the device when it is connected, but it does not change the permissions when the system is booted with the device already connected. The file looks like this:
SUBSYSTEM=="usb_device", SYSFS{idVendor}=="our vendor id", MODE="0666"
Does something else need to be added to the rules file to make it work when the system boots with the device connected? Is there some other script which needs to be created somewhere?
View 1 Replies
View Related
Mar 30, 2011
I have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage.
I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb - randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.
Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory
[code]....
View 6 Replies
View Related
Jun 28, 2011
I have Debian Testing. I am testing XFCE and LXDE and i want to use display manager other than GDM. I have tried SLIM and XDM but when i use them i can't mount partitions and USB through Thunar, PcMan or Nautilus - i get message that i am not authorized (if i do groups in terminal - adm dialout fax cdrom floppy tape audio dip video plugdev games fuse powerdev netdev lpadmin scanner sambashare). When i install GDM everything works fine. I have installed FUSE, HAL, Udev,...I have tried a lot of stuff from AcchLinux forums but nothing worked really.
View 4 Replies
View Related
Jul 11, 2011
how do you change the default audio output device if you have multiple sound cards?
View 14 Replies
View Related
