I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedShort story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I am reading spc456's thread with the same subject line and trying to work through the thread with suggestions by drs305.
My situation is very similar. It started with a sudden Windows boot problem (still my primary OS):
Quote:
This was only if I selected Windows from the boot menu. I thought I could cure it with the Windows-7 Repair Disk from neosmart.net. This appears to have wiped my Boot partition completely and now I can't boot anything. (I'm using the Ubuntu 10.10 live as I type this.)
I downloaded boot_info_script055.sh and here are the RESULTS but I don't know what needle to look for in that haystack.
Code:
Boot Info Summary:
Well, I see why the Windows boot didn't show up. Looks like 30-OS_prober was failing to find the Windows boot record, which makes sense if the whole blessed (ahem) boot partition has been hosed.
I tried to follow the grub-install instructions:
Code:
But since grub2 is obviously not going to find the Windows boot record, I will continue with drs305's.
Code:
No, I have not mounted /dev. Where would I do that? Against which FS?
In any case, I am now printing the article "How to restore the Ubuntu/XP/Vista/7 bootloader" to see if I can get that going.
To my dismay, I discovered that the disk supplied with my Dell machine is NOT a Windows Installation disk, so no straightforward "fixmbr" command will be possible at this time.
I'll let y'all know how I have fared with this. I am sceptical because it's not merely the master boot record that has gotten corrupted but the whole blessed (have I used that adjective already?) boot partition.
I installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies View RelatedToday it happened again: After an apparently trivial update Grub (Grub2) enters rescue mode the next time booting, not displaying any useful help whatsoever at that point. (Remember that at boot time no manual or help pages are available.) I don't know what went wrong, but ... The harddisk or partition in question is now no longer a bootable partition.
I don't want to use much time trying to sort out things, so unless someone may direct me to at better procedure, I am going to save whatever can be saved from the hd and then reinstall debian (in this case: Sqeeze) from scratch. Nothing else has in my experience ever worked before.
It happened when I updated my php5.4 to 5.5 version on my small Debian 7 server. I am only getting GRUB right after BIOS boot pass, then none of the keys working even C or Shift buttons to go to command promt except CTRL+ALT+DEL.
I have tried rescue mode with live CD, selected myserver/root/ partition to install GRUB but not worked.
How to recover my server, I have some important data in it and I don`t want to destroy them.
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I have a pc that was running with the latest version of ubuntu and i wanted to install just vista for somereasons.
And what i did is to format the main driver and try to boot it from vista CD and as you may guess i have an error that says: unknown file system grub rescue
Each time i start the pc. I have an ubuntu live cd and also the vista cd, so what should i do now? the vista cd dosnt boot and the same screen appears all the time.
My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
Yesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it.
After this I restarted but I can't get into either OS. I get an error that says Error: unknown filesystem grub rescue>
I think I need to fix something in grub. I have been booting off of a usb stick with linux on it in the mean time.
Yesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it. After this I restarted but I can't get into either OS.
I get an error that says Error: unknown filesystem grub rescue>
I have an Ubuntu 10.4 installation (dualboot with windows XP) with grub2.After I resized some of my partitions using a gparted live cd, the system goes directly to grub rescue mode every time I boot.Then I follow the instructions which are given in grub2 wiki site to boot.The grub boot directory is now located in sda6 (hd0,6) in my system as found out using 'ls' command.
But in the grub rescue mode when I enter the 'set' command (one of the very few commands available), to display current prefix and root, it gives "(hd0,7)/boot/grub" as 'prefix' and "hd0,7" as 'root'.After entering the following commands, I'm able to boot.There are other users at my home not familiar with ubuntu. windows is their OS of choice. So I don't want to remove windows installation .One solution that I can think of is creating a grub rescue CD using grub-mkrescue, then using windows cd to fix mbr (which will overwrite grub? or the pointer to grub?) and then using the grub rescue cd to boot into Ubuntu but I'm not sure.
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I installed Fedora on my pc over Ubuntu and now Grub wont go any further than rescue mode. (Apparently grubs boot folder was on the Ubuntu partition. Now I see why a dedicated boot partition is handy.) I used VMware to install Fedora as im currently out of CDs. VMware is setup to use the Physical HDD for the primary HDD in the VM. (I made sure VMware disabled access to the windows partitions so the guest couldn't access them.)
I am in Windows 7 at the moment and am avoiding rebooting as that will basically lock me out of the only computer I have access to. I tried running the Ubuntu LiveCD to restore grub but dont know how to mount Fedoras LVM partitions. What can I do to repair grub or at least install an MBR that is capable of booting windows? I can boot floppies and cds using VMware but am not sure what to use to fix this.
Fedora LiveCD wont mount any of the partitions to install Grub
Ubuntu LiveCD may work if I can mount the LVM partitions.
I got my wife to try Linux, so we set her machine up to dual boot with Windows. After a few weeks, she decided not to use Linux, so we deleted the Linux partitions using Gparted on a USB drive and resized the NTFS partition, under the apparently mistaken impression that Grub would detect that there was now no other operating system. When we rebooted, we got error: no such partition, followed by a grub rescue prompt. I've never worked with Grub directly before, so I have no idea what to do at this point.
View 5 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
I'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies View RelatedI uninstalled ubuntu from my main HDD, and its now on a different HDD. when I turn on my computer I get:
Partition not found
Grub Rescue
I've used my windows disk and repaired my mbr and boot (bootrec /fixmbr bootrec /fix mbr) multiple times, yet I always get this problem.
Only way I can boot windows is if I leave my install disk in my drive. It will say press any key to boot from cd / dvd I just wait a couple seconds, and it boots into windows. Without the disk, I get the grub problem. I have only 1 partition on my HDD, and that is my windows 7 partition, nothing else.
A friend gave me Ubuntu 9-10 and I have been using it in my netbook for some time. Bthe other day we did an update and now a black screen is up and states: Error: no such partition Grub rescue>_ I am operating dual O'S with Windows XP and Ubuntu The only thing I have been able to do after searching hours on the Internet is the following: When I type set it gives me the following information:
Prefix=(hd0,5)/boot/grub
Root=hd0,5
Grub rescue>_
I understand that the hard drive is 0 meaning the only one I have and 5 means the location of the grub in the partition. Other than that I can get no further!
I tried to install Ubuntu 10.10 with a USB stick, but when I start the computer with the USB stick I got this:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Boot: I did a MD5SUM of my .iso file and it say "MD5 Check Sums are the same".
After trying to boot into ubuntu grub gave me an error 15 saying the the file could not be found.
View 3 Replies View RelatedI am new to ubuntu OS, I am having quiet a hard time solving out certain problems. I have Ubuntu 10.10 and Win Xp installed on the same hard drive partition i.e. C drive. Now yesterday accidentally I deleted a folder from C while I was logged in to Windows. Now today when I restarted my pc I got this error message :
error : No partition found
grub rescue>
Then somehow I managed to reinstall the Grub loader. Now whenever I restart my PC I get this error message :
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub>
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View Related