Squeeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 RepliesI have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedI got notebook HP Pavilion 15-p171nr. Have installed Debian Wheezy. There was some problems, for example with screen brightness (backlight) and it was solved here: [URL] .....
The problem was solved with upgrading kernel 3.2.0 to 3.16.0 from backports... but... with these steps i lost my wi-fi wl module...
It was downloaded somewhere, compiled and worked well until kernel upgrade... For the current moment i can not compile it.
My hardware:
Code: Select all08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Within last steps official wiki recommends (my device is in the supported list): [URL] .... but I got problems with compilation... here they are:
I have installed correct linux-headers:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# apt-get install -t wheezy-backports linux-headers-amd64
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-amd64 is already the newest version.
[Code] ....
Then I am trying to reconfigure already installed broadcom-sta-dkms package and here is what I got:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# dpkg-reconfigure broadcom-sta-dkms
------------------------------
Deleting module version: 5.100.82.112
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.16.0-0.bpo.4-amd64
[Code] ......
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type
Code: Select allsudo modprobe 8821au
I get a
Code: Select allmodprobe: FATAL: Module 8821au not found..
But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:
Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko
it seems to work:
Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.
But lsmod doesn't show me the module after that.
I also added
Code: Select all./kernel/drivers/edimax/8821au.ko
to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.
So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.
I upgraded my kernel in my Debian Lenny to version 2.6.32-bpo.4-amd64 to fix a problem with a software and ALSA-related issues. The thing is that now, when I boot, eth1 is not enabled and I have to "load" (I guess) the driver each time. To do this, I go to the folder where all the files for the drivers are and I run:
modprobe lib80211
and then
insmod wl.ko
That I got from the readme file. That gets the wireless working perfectly again, but when I reboot the wireless is dead again and I have to run the commands above again. I imagine that what I should do is to build the driver again, for my new kernel. However, according to the readme file, before I need to install linux-headers-generic and build-essential. With build-essential, it says it's already the newest version, and with the linux-headers, I don't know which one should I install for my kernel! I thought it would be the linux-headers-2.6.32-bpo.4-xen-amd64, but when I tried that, this is what happened:
debian:/home/hernan/Programas/hybrid_wl# apt-get install linux-headers-2.6.32-bpo.4-xen-amd64
Reading package lists... Done
Building dependency tree
[code]....
So the warning says something about the MODULE_LICENSE being missing... how to build the driver again to make it load each time I boot?
My problem is that it won't load the dkms module and Virtualbox will not run.
View 14 Replies View RelatedI'm trying to use module-assistant to add the vboxdrv using instructions also found here in the debian forum. However, m-a can't find the linux-headers because it looks for the package linux-headers-2.6.32-5-trunk-686. I attempted to specify were the headers were by using:
m-a prepare --kernel-dir /usr/src/linux-headers-2.6.32-5-686/
but also doesn't work. Instead, I get the error:
Bad kernel version specification at /usr/bin/m-a line 566.
Anyone knows how to work around this?
By the way, the reason I am doing this is because when I installed virtualbox (following the instructions in debian wiki) there's no vboxdrv. When I try to modprobe it, I get:
FATAL: Module vboxdrv not found.
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedHi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
I've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedI:m trying to install the module RTL819CU onto my kernel so that I can use my wifi usb dongle. When I try to install it I get a make error 2.
[code].....
I've just upgraded my kernel to 2.6.32 and I cant use sound anymore!!! My card was detected ,here is the output of lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
also frimware is installed ,gstreamer as well the sound is not on mute and it was working on the previous kernel .
A few days ago on my rss reader, I have read article about Ksplice uptrack that check updates for kernel and update kernel without reboot!
View 1 Replies View RelatedI'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies View RelatedI do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
View 8 Replies View Relatedsince the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies View RelatedJust updated the kernel to 2.6.32.22 as requested by Update Manager, and was rebooted into low graphics mode, the nvidia kernel module failed to load.I tried installing the linux-headers-2.6.32.22 but this made no difference. This could get ugly if such an early update mucks up
View 9 Replies View Relatedhow to do Mysql, PHP, Apache installation configuration, module/library update
View 2 Replies View RelatedI have some issues concerning so called "11-minutes-mode" - RTC update"11-minutes-mode" definition In hwclock man page we can read:"Automatic Hardware Clock Synchronization By the KernelYou should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (we'll call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way. To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off. If your system runs with 11 minute mode on, don't use hwclock --adjust or hwclock --hctosys. You'll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode. Here are my questions:1 . How to check if "11-minutes-mode" is on/off ?The output of adjtimex -p looks like this:
mode: 0
offset: 17504
frequency: 6140386
[code]...
I've installed opensuse 11.3 few days ago on my laptop, and it seems after kernel update, wifi refuses to work. I'm using gnome and after the update the iwlagn module was not present in the 'ifup'. So i run modprobe iwlagn and here is the output.
View 3 Replies View RelatedAfter i updated to the kernel version 2.6.34.7-61.fc13.x86_64 my wireless stopped working!
My network card is a Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
The interface is not listet anymore under ifconfig, under the network icon i see only wired networks.
If i boot using the old kernel (2.6.34.7-56.fc13.x86_64) everything is fine.
when i run lshw -C network i can see that the driver is not loaded correctly
Code:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
[Code]....
I have a Hardy which last night asked for updates that included kernel changes. Today I find I no longer can connect using WIFI and have no sound. The GUIs are just not there and it's as if the controllers themselves have disappeared. For example lshw -C network reveals a Cisco Airon Wireless, but it's not listed as a wireless device, just as network controller.Can anyone advice me on how to approach this? Is it possible to revert changes or something?
View 5 Replies View Related I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:
Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
So I googled this error and found this: [URL] ....., however response of mine VPS was:
Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory
Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.9 (wheezy)
Release: 7.9
Codename: wheezy
xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux
I am on squeeze with kernel 2.6.32-3-amd64 and I have installed nvidia driver :cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 GCC version: gcc version 4.3.4 (Debian 4.3.4-8)
View 1 Replies View Relatedmy wireless doggle is not suppoerted out of box on squeeze.It's based on zd1211rw,just lack the vendor and product id.how can I hack the source and rebuild the driver module?
View 1 Replies View RelatedI'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.