Debian Configuration :: Computer Reboot Automatically Each 4 Hours 30 Minutes
Jul 30, 2015
I've an Blade 1500, sparc64 IIIi with 2 hard disks and 2go of RAM. The computer run with debian 7.7.0 and BSD (opensxce) for each hard disks.
1/ When it's run under BSD there are no problems, the uptime are on many hours.
2/ when it's run under debian with XFCE x-window, the uptime is 4 hours 30 minutes and computer reboot automatically !
Into the control panel i've deactivate the hibernation, screensaver and power management ! I want to find the files for manage the time down. I think that the problem is in XFCE window manager.
View 0 Replies
ADVERTISEMENT
May 25, 2011
I have a computer home that I use a web server and I had Lenny in it for about a year and didn't experience any problems. Recently I needed to update to Squeeze just to be able and use part of my server for a game(which I couldn't compile on Lenny). I renamed every "lenny" word in the /etc/apt/sources.list with "squeeze" and ran dist-upgrade. Everything seemed fine(minor some "link not found" warnings). I also had some minor problems with the mysql configuration after the update but I managed to fix them all. Then I noticed that after some hours(not sure how many) I can suddenly not reach my computer via ssh. Neither can I visit my website(even from the local network). The computer doesn't appear either in the router's "attached devices" list. My other computers have no problems so it can't be a router issue.Pinging from the server to the outside world doesn't work. I tryied "sudo /etc/init.d/networking restart" and that didn't do anything. The only way to fix the problem is by rebooting but then again after some hours the problem is still there. Do you guys have any idea what the problem can be?
View 1 Replies
View Related
Jun 2, 2010
I am running a LAMP system with CentOS 5.4.The clock just automatically shifted backwards by 19 hours and 30 minutes crippling some of my reports and probably damaging something else along the way.The router supplying IP to this server is a DD-WRT and shows proper time.By the way what does that mean? time drifted by that 33.667 ms?
View 8 Replies
View Related
Jul 13, 2010
I'm having a really weird, annoying problem: approximately every 10 hours, like clockwork, my internet connection stops working. (Last time I had the presence of mind to check the uptime: it was 9 hours 48 minutes; this was maybe 5-10 minutes after it happened). My existing connections (IRC, etc.) keep working fine, I can access my home router's configuration page, and `ping` still works, but otherwise new connections invariably time out (whether it's a web browser, git/subversion, or whatever). I have found no solution to this other than rebooting.
View 13 Replies
View Related
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Aug 3, 2011
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies
View Related
Oct 14, 2015
After mapping iscsi storage from my netapp and scanning for new devices I run multipath -v2 to create the multipath device handle under /dev/mapping/. This normally takes about 2 seconds or less on every other linux distribution I use. On Stretch it takes a little over 3 minutes. I have tried several different versions of multipath.conf but the result is always the same.
My most recent multipath.conf file is available here : [URL] ....
and the output of multipath -v4 is available here : [URL] ....
View 0 Replies
View Related
Aug 21, 2015
I am using Debian sid 4.1.3-1 and when i shutdown the system it takes 3 - 5 minutes before actually shutdown, there is only a black screen until the hdd led start flashing and after that the system finally shutdown. The weird part is that sometimes it happen in less than 30 seconds , how can i figure out where the problem is ?
View 8 Replies
View Related
May 24, 2011
I've got a server listening on a port. when I stop the server the port stays open for some minutes. How can I close it immediately?
View 2 Replies
View Related
Dec 30, 2010
I'm having a VPS using Ubuntu 10.4 and i would like a guide on how to restart apache2 process every few hours (a time determined by me).
View 11 Replies
View Related
Jan 18, 2011
Computer hangs and sometimes won't reboot.
When it hangs I have seen this message a few times:
o[4348] EXT3-fs error (device sda1) ext3_get_imode_loc : unable to read inode block_inode = 14720620 block = 58753255
Also when the machine boots up I get a message saying something about IOMMU should be set in BIOS, but I can not find any such setting in BIOS. I do not know if this is related to the hanging.
I thought I had a hard drive problem at first so I tried a different hard drive. Same problem.
The mother board is an ASRock N68C-S.
One other thing, where is the file located that boot up messages are written to?
View 2 Replies
View Related
Jan 20, 2010
Hi!
I've been frustrated with several problems I've been experiencing with Karmic Koala. The one I'll mention in this post is the fact that it randomly decides to adjust the system clock ahead 6 hours. I believe this began happening when I set the location for the system time that displays in the top panel. I'm guessing that the 6 hours is the fact that I'm in the US Central Time zone.
View 4 Replies
View Related
Jul 20, 2010
do not post such long blocks of messages directly on the forums. Attach the output as .txt or use a pasetebin.
View 5 Replies
View Related
Jun 22, 2011
I have a switch tray on my computer and I installed opensuse in one of the hard drives that I have but as I switch between the windows hard drive and opensuse the time changes all the time. For example it's 10pm right now and if I switch the hard drive to opensuse the time automatically gets adjusted 4 hours back and then I fix it and when I switch back to my windows hard drive the time goes forward 4 hours. I check both region settings and they are both set to NY Eastern time. Why is it doing this?
View 2 Replies
View Related
Aug 4, 2010
I insert the domain name "g3c" in menu: System->Administration->Network (file attach)
When i reboot the computer this information lost: why ?
Where i must insert this information ?
My s.o. is debian 5.05
View 2 Replies
View Related
May 29, 2011
I've a new Dell Precision T1500, Core i5, 8gb RAM, nvidia graphics card, that seems to freeze after some hours. I'm not sure how long exactly, more than two hours at least.
OS: Ubuntu 11.04
Cause: leave computer turned on, unattended for some time >2hrs.
Symptom: Screens are blank, no response to keyboard or mouse input, reboot is only way to rectify.
Things I've tried:Turn off screen saver
Disable "Sync to VBlank"
Disable screen power management, screen stays "on" always
So far none of these have corrected the issue. The screens are still on, but there is nothing displayed. Same thing did happen with Ubuntu 10.10, I'd hoped maybe 11.04 would fix it, alas, no.
View 6 Replies
View Related
Sep 7, 2011
Allright peeps does debian updrade automatically or one has to go about it by self and is it recommended to upgrade or just to go about re installing with a new dvd?
View 1 Replies
View Related
Feb 20, 2016
I rebooted my vServer (Debian 8) and it doesn't came back up. Well, I used the rescue console on my server and the server seems to be running fine, except the network was broken. So I tried 'ifconfig' but nothing came up. So I tried to enable my interface with 'ifconfig venet0 up', and now it appears in my ifconfig list
Code: Select allroot@i67svof:/var/www# ifconfig
venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:557 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36463 (35.6 KiB) TX bytes:0 (0.0 B)
My HWaddr doesn't look that well :) 'ip addr' prints this result:
Code: Select allroot@i67svof:/var/www# ip addr
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
These are the last lines in /var/log/syslog:
Code: Select allroot@i67svof:/var/www# tail /var/log/syslog
Feb 20 11:34:16 i67svof systemd[1]: Stopping memcached daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Network Name Resolution...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Regular background program processing daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Login Prompts.
[Code] .....
And finally my network config in /etc/network/interfaces
Code: Select all# Auto generated lo interface
auto lo
iface lo inet loopback
# Auto generated venet0 interface
auto venet0
[Code] .....
View 1 Replies
View Related
May 3, 2016
Is it mandatory to reboot a public server after upgrading openssl? Or is it sufficient to restart the services?
View 2 Replies
View Related
May 9, 2010
If I reboot my machine, the interface is down. How do I set the interface so it will start after I rebooted the machine?How do I do it in Debian?
View 3 Replies
View Related
Dec 7, 2010
I have installed Firestarter, and set it up following some manual (just a simple, baseline setting, nothing fancy). However, after restart I got error message: Starting the Firestarter firewall... failed! and then, later: startpar: service(s) returned failure: firestarter ... failed! Why this happens?
View 4 Replies
View Related
Sep 21, 2015
I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
View 5 Replies
View Related
Jun 27, 2015
Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.
how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.
View 3 Replies
View Related
Feb 17, 2016
A couple of days ago I asked why my pc changes the wireless card name.It switches between AR9285 ( right) and AR5008 ( wrong). Well, it is not the case. When system identified with AR9285,it loads ath9k and I can connect to the router. When system identifies my card as AR5008, no kernel module is present at all ( lspci -k). The wrong card name occurs only when system rebooted. If I gracefully shut down the system, it always comes up with a right name for the card( AR9285). So, how to force the system identify my card right no matter if I reboot or shut down?
View 1 Replies
View Related
Jul 14, 2010
after a reboot of my Lenny system, the default gateway will lost. Then i must try "networking restart" and the gatway will be set
my interfaces looks :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[Code].....
View 1 Replies
View Related
Aug 10, 2010
I have some issues concerning so called "11-minutes-mode" - RTC update"11-minutes-mode" definition In hwclock man page we can read:"Automatic Hardware Clock Synchronization By the KernelYou should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (we'll call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way. To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off. If your system runs with 11 minute mode on, don't use hwclock --adjust or hwclock --hctosys. You'll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode. Here are my questions:1 . How to check if "11-minutes-mode" is on/off ?The output of adjtimex -p looks like this:
mode: 0
offset: 17504
frequency: 6140386
[code]...
View 1 Replies
View Related
Nov 30, 2015
I am using Debian 8 with systemd. I noticed that eth0 it is not starting automatically.
During boot process, I see this message: a start job is running for LSB: Raise network interface
View 5 Replies
View Related
Oct 30, 2010
My wireless in fresh Squeeze install would not connect automatically. I have to click on the network manager and enter the root password to connect every time I start up. I have "Enable Networking" and "Enable Wireless" checked in the Network Manager.
System>Preferences>StartupApplications>NetworkManager --- checked
NetworkManager>NetworkConnections>Wireless>[mywifinetwork]Edit>AutomaticallyConnect --- checked
There are only 2 lines now in /etc/network/interfacesauto loiface lo inet loopbackWhat should I do to get the NM to look for and connect wireless automatically at start up
View 13 Replies
View Related
Dec 9, 2010
I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies
View Related
May 19, 2011
I have squeeze and I've created my own custum kernel. Howto configure grub 2 to boot with this custom kernel automaticaly?
View 5 Replies
View Related
