I installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.
View 4 RepliesI was checking my server and found a /net directory with nothing visible inside. The mysterious directory is /net and I checked to make sure nothing was mounted to it:
[root@mysql /]# mount
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI am using squid on my cent os 5. The cache directory is almost full.
Code:
# cache_dir ufs /var/spool/squid 1000 16 256
kindly guide me how can i flush or clean the data inside the cache directory of squid using terminal
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 7 Replies View RelatedI have configured a squid proxy; it's running, but there was a problem: it does not provide service to client side.
The error was: "could not connect to session manager" "cannot open the network socket"
I'm using squid 2.6, Win2008 AD server. Clients are using winxp, win7. how to config squid for the authentication with win2008 AD?
View 2 Replies View RelatedI have a squid server currently running with basic authentication. This is a must because we constantly have different people using different machines but the rules must be set per user, not per machine.
We also have a lot of users coming and going. So every time a new user comes to the office I have to manually create a user for him so he can authenticate.
Anyway.. We do not have any windows servers so no Active Directory. But I need some solution to pass the windows login to Squid.
First question: It seems I am using NTLM currently for samba as the person can map their home directories on their windows box withuot authenticating. Why can I not use it for squid?
Second question: Can I make my Centos server into an AD server?
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies View RelatedI would like to be able to get squid or dansguardian to authenticate a user account against active directory so that a users browsing activities can be logged.
I can find lots a very useful info on how to set up ntlm_auth etc, but all of these methods produce a pop up window when the user launches the browser.
I'm posting this thread because I would like to be able to authenicate, but without a pop up window. Is there a way of automatically carrying out this authentication so that the user is unaware of it.
We've previously attempted authenticating against an NT4 PDC, but the users worked out that they could use any user account on the network, not just the user that was logged in which kinda defeated the whole idea of logging the users activity.
My current setup is:
Windows 2003 AD
Windows XP Clients, soon to be converted to windows 7.
Fedora 11 running squid and dansguardian.
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
I need information to configure squid proxy server in centos 5.3 i need that urgent.
View 1 Replies View Relatedi installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
View 1 Replies View Relatedhow do i configure squid proxy server in centos 5.5 final text mode only to block facebook from 9am to 4pm
View 3 Replies View RelatedI am using centos 5 for squid. I have enabled delay pools in it. The scenario is I have two clients machines have IP address 192.168.1.200 (The Manager) and 192.168.1.201 (Manager Assistant). The issue is I assign 512kbps to the Manager IP address and 128 to his assistant. When either of them download it start from 60 KB/Sec they finally get 11 KB/Sec which is wrong. If I disable the assistant delay pools settings then the Manager get 60KB/Sec continuously. By enabling both squid does not show any error.
Following is my line of code taken from squid.conf
Code:
acl our_512kbps src "/usr/local/squid/etc/our_512kbps"
acl our_128kbps src "/usr/local/squid/etc/our_128kbps"
http_access allow our_512kbps
http_access allow our_128kbps
http_access deny all
#Now Delay Pools
delay_pools 1
delay_class 1 1
delay_parameters 1 65536/65536 #512/8*1024=65536
delay_access 1 allow our_512kbps
delay_access 1 deny all
#Now delay class 2
delay_class 1 2
delay_parameters 1 65536/65536 16384/16384 #128/8*1024=16384
delay_access 1 allow our_128kbps
delay_access 1 deny all
what i need, I got two servers for about 4000 users and 300 servers and well the guy never setup dns caching right, so im redoing it. Now my goals
1) DNS cache
2) Transparent Squid Cache only
3) Load Balance - at switchlevel
Upgraded Hardrives to SSD 2x32gb each server 4gb of ram 2x Dell poweredge 850's - p4 2.8 (single cores) So any advise , pointers , expeirnces and best ways to do this being both server will do both dns caching and squid! Also is bind9 the best for this?? i seen stuff about DNSmasq what performs better( i dont need DHCP)
I just installed Webmin on this CentOS 5.5 client and would like to know if it's possible to remotely administer the Squid server. The one I'm using for webmin is different from the one where Squid proxy is running.
How do you set it up and where in Webmin?
I have installed squid using CentOS 5. The server is dedicated only for squid proxy server. I want to know how can I disable unwanted services which load at booting time. Like sendmail,samba,etc etc. These services take memory and are not in use. I does not know how can I make my server only for squid proxy service by removing unwanted services?
View 1 Replies View RelatedI am using Cent Os 5. I want to know that is there any way to check that how much size of squid cache directory is full? Normally when squid size will reach upto 2GB then I have to clean it.
# cache_dir ufs /var/spool/squid 2000 16 256
I assign 2000 MB to the cache size. One month have been pass while squid is running but i am unable to know how to check the current status of my squid cache size.
I am trying to get into a directory on my server, that is owned by root.
[Code]....
today i encountered centos 5.5 final server with a squid configured to block facebook from 9am to 4pm. i have tried to follow up the steps but am stack where time restriction is done and there is no proxy configuration done in the browser. the ip address of the server is being used as the default gateway.
View 2 Replies View RelatedI just want to place upload/download limit to each ip address ( say 20MB per day for each ip or specific ip) using squid proxy i tried through delay pool but it control only download/upload speed not place any download/upload quota restriction. following are my codes I have 1Mbps line
delay_pools 2
delay_class 1 2
# here 700kbps(87Kbytes) Net-Total usage limit, with 50Kbytes per user
[code]...
I also used
"reply_body_max_size" parameter to control upload limit.
But
"request_body_max_size" only restrict download based on size.
how to setup quota ( download quota per day per ip)
I installed squid non the CentOS 5 server. When I try to start squid I am receiving following error:
# service squid start
init_cache_dir /var/spool/squid... Starting squid: [FAILED]
The logs indicate the following:
$ sudo tail /var/log/squid/squid.out
squid: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: Permission denied .....
Although, all the libraries which are shown as missing are present, but still I am seeing the following.
$ ldd /usr/sbin/squid
linux-vdso.so.1 => (0x00007fffb95ff000)
libcrypt.so.1 => not found
libssl.so.6 => not found
libcrypto.so.6 => not found
libdl.so.2 => not found
libz.so.1 => not found
librt.so.1 => not found
libpthread.so.0 => not found
libm.so.6 => not found
libnsl.so.1 => not found
libc.so.6 => not found
I have tried setting the environment variable LD_LIBRARY_PATH
$ echo $LD_LIBRARY_PATH
/lib64:/usr/lib64:/lib:/usr/lib
But still no use.
We have a squid-proxy configured with 1 delay pool to limit the bandwith to 6M. I have to create a kind of exception for a specific
remote host for which we want to reserve 1M which is not included within the 6M. How should I do that? Here is our actual configuration of the delay pools
acl all_network src 0.0.0.0/0.0.0.0
delay_pools 1
delay_class 1 1
[code]....
How To: Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server I have 3 WANs connection (2 ADSL and 1 Wimax). And 30 clients on LAN.
eth0 connect with Wimax
ip= 172.23.x.x
eth1 connect with ADSL1
ip=10.10.6.x
eth2 connect with ADSL2
ip= 10.10.5.x
eth3 connect with LAN
ip=192.168.1.x
how to do Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server.
I am putting together some new systems for my customer and I'm having some trouble with a script that we use to back up files to a DVD R. The problem is that I can't write a 2nd session to the DVD unless I eject the disk and reload it. The drives are slimline type drives, Sony BD-5730S and Teac DV-W28S-V93, so they won't reload without human intervention. Opsys is CentOS 5.4 or RHEL 5.4. I've tried both AMD and Intel based mother boards. If i try this on Fedora 11 or 12 it works fine. This works on IDE attached drives but not a SATA attached drives. Fedora appears to use something called genisoimage instead of mkisofs. I can't get genisoimage to run on CentOS or RHEL.
Here's the code to setup the test files:
rm -f /tmp/BDtest/*
mkdir /tmp/BDtest
dd if=/dev/zero of=/tmp/BDtest/blank.iso bs=10M count=1
for NUM in {1..160}
[Code].....
I am trying to setup a chroot with a sshd service running. when I start the sshd in the chroot and login I get this message. Can not find anything on google.
[damien@dev ~]$ ssh -l damien localhost -p 2233
damien@localhost's password:
Last login: Tue Jul 21 13:32:52 2009 from 127.0.0.1
debug3: PAM session not opened, exiting
Connection to localhost closed.
[Code]...
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View Related