Server :: Squid - Cannot Open Session Manager - Cannot Open Network Socket
Jan 27, 2010
I have configured a squid proxy; it's running, but there was a problem: it does not provide service to client side.
The error was: "could not connect to session manager" "cannot open the network socket"
View 1 Replies
ADVERTISEMENT
Apr 11, 2010
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
View 9 Replies
View Related
May 13, 2010
I do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
View 2 Replies
View Related
Jun 4, 2011
To try another windows manager, I have to open a new display without a windows manager. The problem is that when I run
Code:
startx -- :1
kde runs automatically on it. How can I open a graphic session without a window manager?
View 2 Replies
View Related
Apr 4, 2011
I mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies
View Related
Sep 24, 2009
I just tried FreeNX. I work great. I am thinking about uninstalling the vino/vnc on my machine.
However, I'd like to know if FreeNX can access the session that open locally on the server. I tried session 0 and 1, none of them can access the local session.
For default vnc, the connection will let you access the local session on the server. Can FreeNX do that?
View 2 Replies
View Related
Aug 27, 2011
This is a brand new install of 11.4. While trying to set u p for wireless, when I click on network manager it does not open. Do I need to re-install? I am using a Toshiba Satellite , dual booting with XP. The install was seamless, and picked up all my files from the previous distro. Now the big bugaboo, wireless, but I can't seem to get oout of the starting gate if I can't get to network manager?
View 2 Replies
View Related
Jul 20, 2011
I'm having a problem at the moment (sometimes), tail -f cache.log
[Code].....
View 1 Replies
View Related
May 5, 2010
I'm using PHP on a centos server to send emails out. It should use smtp with authentication to send out and one of the credentials is the hostname but in trying to use those credentials I get this error:
Zend_Mail_Protocol_Exception: Could not open socket
However, when using an ip address instead of the host's name it seems to work making me think this is a server issue/Centos issue.
View 3 Replies
View Related
Aug 12, 2010
I've been tasked with transferring a Python web server from a Debian box to a Fedora server for work. (I think) I've been able to transfer all required files but I'm unable to run the web server because whenever I make the HTTPServer call in the python file I get an error "Cannot assign Requested Address".
I've basically traced the issue back to the server being unable to open a socket on the requested port (8085 in this case). I've checked netstat and there are no processes running on that port (or any other one I've tried for that matter) so wondering if there's a system configuration I need to do to allow programs to bind to sockets. Is there a deny configuration set up somewhere I need to modify? Does this even make sense?
View 1 Replies
View Related
Feb 20, 2011
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies
View Related
Apr 14, 2010
I have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
View 1 Replies
View Related
Dec 16, 2010
i want to open a cmd.exe of a remote machine in my own machine.. i am using c language. its just for educational purpose.
View 9 Replies
View Related
Sep 18, 2010
trying to set up a very minimal X on my 10.04 64 bit version of Ubuntu running nothing but Open SSH and acting as a firewall/router, making a PPP connection. The reason, is that I want to set up KVM/Qemu and run a virtual machine. The virtual machine will have a graphical environment and will be connected to my TV so that I can watch movies, stream TV etc. using it. So far, I have done the following:
sudo apt-get install xserver-xorg xserver-xorg-core miwm
When I try to run miwm the error message is:
(null): can't open display.
I have no DISPLAY variable set, but even when I set one myself using export DISPLAY=:0.0 it makes no difference.
View 9 Replies
View Related
Feb 26, 2010
I have a java application that I wrote recently. It runs off port 9955. The application runs great on my mac server. When I installed it on my linux box i cant get to it from outside the box. A port scan shows the port as closed. I flushed my iptables, did not help. I can telnet into the app locally, from the server and it works great. I cannot telnet from outside the server. I have a reference to the application in /etc/services as a tcp port (which it is).
netstat shows it as listening
netstat --listen
tcp6 0 0 [::]: SimpleSocketTest [::]:* LISTEN
netstat -anp | grep 9955
tcp6 0 0 ::: 9955 :::* LISTEN 1484/java
View 4 Replies
View Related
Feb 1, 2010
Just installed Fedora 12 on a P4 IBM. Everything installed fine. Then, I rebooted, installed updates, and installed a few simple programs (emacs, ssh server). I rebooted since some kernel updates had been made. I can't login anymore. I get a brief message at GDM that says "unable to open session" after I enter my password. Root also doesn't work, but I figured out that root logins are disabled. I found something that recommended disabling selinux, so I reboot with selinux=0 parameter. That still didn't fix the problem, but did initiate selinux to re-label everything on the next boot.
My next thought was that maybe my password got corrupted, so I went into single usermode. I ran passwd justin, so I know that my password is correct. I still can't login via GDM or on a tty.
EDIT: I was also thinking I might need to uninstall something that I did; however, networking is disabled in single usermode, and if I init 3, then I get a login prompt that I can't open. Is there a way that I can enable root login? That might be a starting point to see if it's my user account or a general login problem.
View 4 Replies
View Related
Oct 31, 2010
My Fedora 12 box got that error after some updates on it.
I can login but it's prompting that error and everything will be a black space.
But still no good.
According to the log messages, the ConsoleKit session isn't initializing. I can't paste the logs here coz it's on another laptop.
I could think of just upgrading it to Fedora 13 but there's no way I can backup all of my files on it. Is it just safe to upgrade it?
View 1 Replies
View Related
Mar 11, 2011
Since doing an update (Kubuntu 10.04), this message appears when attempting to log in;
Quote:
Warning: cannot open ConsoleKit session: Unable to open session: the permission of the setuid helper is not correct.
After clicking ok on the above warning, the system logs in, but gives 2 error messages;
- removed sound devices
- KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings. contact your system administrator or distribution. KNetworkManager will not start automatically in future.
View 2 Replies
View Related
Mar 8, 2011
when I type:
Code:
After the command has run (verified with atq) I cannot attach to screen using "screen -r" and ps shows screen is not running:
Code:
why the 'at' command can't start screen in the background for me to attach to later?
Noticed screen is actually returning "Must be connected to a terminal." to logs. Does 'at' not provide a terminal?
View 5 Replies
View Related
Dec 20, 2010
i wanna use the x11-forwarding feature to connect me to an open session. is that possible? i have a linux-machine on which runs the jdownloader. the jdownloader is only as java-gui-only-tools available. so it runs always on a open x11-session on the linux-machine. i wanna configure this tool from everywhere. how can i make this? (if it is possible i wanna use x11-forwarding).
View 1 Replies
View Related
Dec 31, 2010
My server (CentOS 5.5) is a ldap client authenticate to LDAP server (Successfully authenticate) I use pam for ssh. I can ssh successfully with any users on system. But I cannot su - from ssh. It display the error: Could not open session. I look to log file and it shows: # tail -f /var/log/secure
View 5 Replies
View Related
Jan 18, 2011
After following a tutorial to install a pxe server for debian network install I can't log in my user session on gnome anymore
I got an error saying : /$home/.dmrc was ignored, can't save session and language the file must belong to the user and has persmission 644
I remember on my last session i got some icons on my home folder with a little lock icon on them i tried to remove them successfully using the command line but i still can't login. however i can successfully login with another user.
View 6 Replies
View Related
May 9, 2009
I installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.
View 4 Replies
View Related
Aug 6, 2009
I coundn't log in fedora anymore. Everytime i try, i receive the report "unable to open session".
View 6 Replies
View Related
Nov 1, 2009
I have some typical issue while trying to connect to my root or other users from my terminal.
like su - asking for password and after that it displyed a message like $su -
Password: could not open session
I tried connect using ssh then I am getting the following $ssh root@localhost Last login: Sun Nov 1 14:13:45 2009 from localhost Connection to localhost closed.
Background: Before this happended, I was tryied modify sshd_config in /etc/ssh/ folder to allow passwords less than 2 words.
View 1 Replies
View Related
May 31, 2011
I am trying to install Fedora 14 or 15 into a 2008 R2 Hyper-V environment. I can successfully run the install and log into the system as a user. I need to install the integration components so the mouse works. However, I can't find a way to get a terminal window open so I can mount an .iso with the installers.
View 2 Replies
View Related
Dec 28, 2010
I am currently running Suse 11.3. I continue to get the following error when logging into the KDE login manager with my user account
"Warning: Cannot open ConsoleKit session: Unable to open session. The name
org.freedesktop.ConsoleKit was not provided by any .service files."
After acknowledging the error, it resets back to the login manager screen. If I login with root, I get the same message, but it continues on and logins into the session
View 5 Replies
View Related
Mar 27, 2010
I stream my local police station dispatch on the web using an icecast/darkice configuration [URL]. The downside of using this software is that once you initiate darkice, a terminal has to be open - the process does not run in the background.
I tried placing a monitor on my server (ouch, that hurt) and keeping darkice alive that way, but my mail server kicks the process. Now, I set the KeepAlive variable to something outrageous and keep an ssh session open on my desktop box to keep the stream going. Screen does not work as Postfix boots that as well.
keeping the process going indefinately?
View 5 Replies
View Related
Mar 15, 2010
On my ubuntu 9.10 pc i am not running a GUI.
Every thing is run from command line.
How do i start a second telnet session from command line.
Plus can i have 4 telnet session open and move from one to the next and back again.
View 5 Replies
View Related
Feb 19, 2010
Any easy to install/configure network/server monitoring tool? PLease note I'm looking for something of little lightweight here (Not something like zenoss) But I'd still like to get performance graphs and event notifying alerts. Also note this is to monitor less than 50 servers and perhaps a firewall or 2.
View 2 Replies
View Related