CentOS 5 :: Strange Empty Directory Found On Server

Mar 17, 2009

I was checking my server and found a /net directory with nothing visible inside. The mysterious directory is /net and I checked to make sure nothing was mounted to it:
[root@mysql /]# mount
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

View 3 Replies


ADVERTISEMENT

CentOS 5 Server :: Mount Cifs Does Not Work, But Smbclient Does. Empty Directory In First Case?

Feb 18, 2009

I am trying to mount a samba share using an fstab entry

//srv1/Corporate /winfiles cifs user,uid=0,rw,noauto,suid,credentials=/root/wnmount_credentials.txt 0 0

The mount appears to complete cleanly, however when I browse the directory /winfiles it is always empty.The smbclient command works properly using the same credentials.The /root/credentials file looks something like this

username=********
password=********

View 5 Replies View Related

CentOS 5 Server :: Squid Session Not Found In Any Directory?

May 9, 2009

I installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.

View 4 Replies View Related

Ubuntu Servers :: Bash In 10.04 Server - Every Empty Line In The Script Results In "command Not Found"

Oct 8, 2010

Bash acts weird in 10.04 server. Whenever I try to run .sh scripts, every empty line in the script results in "command not found". Then on even simple scripts I get syntax errors, but the same exact scripts work on my 9.10 desktop installation. There's also another problem, I'm not really sure if it's bash-related. After setting the proxy using

[Code]...

View 5 Replies View Related

Ubuntu :: Getting Into A Directory On Server - Sudo: Cd: Command Not Found

Feb 6, 2011

I am trying to get into a directory on my server, that is owned by root.

[Code]....

View 6 Replies View Related

OpenSUSE Install :: Strange File In The Root Directory?

Jun 1, 2011

In a fresh install of 11.4 I see a file named "1" (the number "One") in the / (root) directory.

Code:
vodoo@host:/> ls -l 1
-rw-r--r-- 1 root root 0 May 31 11:29 1

Who creates this file and what is it good for?

View 9 Replies View Related

CentOS 5 :: Setup The Centos Directory Server Without An Internet Connection?

Apr 20, 2010

Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds

but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?

View 3 Replies View Related

General :: Command Not Found For All But PWD And Echo - Path Empty

Mar 1, 2011

I logged into my Red Hat Enterprise Linux machine at work (use it for software development) and the primary GUI does not load. Instead, widgets appeared for xclock, xterm, and Firefox. In the terminal, I start typing in commands to try to figure out what's going on, but all commands are not found except pwd and echo. I 'echo $PATH' and that returns just an empty, blank line. 'echo $SHELL' lets me know I'm using cash.

The likely cause was my attempt to install Adobe Reader Firefox plugin yesterday. After it downloaded, I ran the binary but Firefox didn't seem to recognize that I had installed it, so I went into my .cshrc file and added the adobe folder to the path. That didn't seem to work, so I gave up, deleted the binary and the folder I installed to, and removed that directory from the path in the .cshrc file. This last thing (the export PATH line in that file) I'm certain is back exactly as it was before.

I have successfully added the /bin and /usr/bin back to the path from command line via
setenv PATH /usr/bin:/bin
but of course it doesn't stick after reboot nor does it magically load the primary GUI. I'd rather not go through the effort of creating a ticket for our company's Global Service Desk cuz there's no telling how long that could take to resolve. In the meantime, I can't do any programming.

View 23 Replies View Related

Ubuntu :: Make-kpkg Strange Vanilla Kernel Build Errors: Found 60 Section Mismatch(es) ?

Apr 30, 2011

I've getting strange build errors when using make-kpkg with the latest (2.6.39-rc5) vanilla kernel.I'm using the procedure outlined here:
https:[url]....e.g.:

Code:
make oldconfig CONCURRENCY_LEVEL=`getconf _NPROCESSORS_ONLN` fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers

I'm getting the following build errors:

Code:
Building modules, stage 2.
MODPOST 3053 modules
WARNING: modpost: Found 60 section mismatch(es).To see full details build your kernel with:'make CONFIG_DEBUG_SECTION_MISMATCH=y'
CC arch/x86/crypto/aesni-intel.mod.o[code]....

There is even much more error output but it looks like it is basically the same issue.

View 2 Replies View Related

Ubuntu :: Empty ISO Directory After Mounting?

Jan 27, 2010

I've looked everywhere and haven't found someone with a similar problem or even a hint to how to fix it or what's even going on.I'm trying to mount the Sims 3 raw ISO so I can install the game with PlayOnLinux. Every program or method I've used to mount it seems to mount it successfully. My problem is, that when I go to open the mounted ISO image, the folder is empty and nothing comes up. Even when I go to rightclick > Properties,it displays the contents as nothing.

View 9 Replies View Related

Ubuntu :: Saying Cannot Move, Directory Not Empty?

Jul 20, 2010

I'm trying to move a folder via sudo mv ioncube /usr/local/bin/

but it says something cannot move since directory is not empty. What do I do now?

View 5 Replies View Related

Server :: Change The Webroot Of The Httpd Server - Directory Doesn't Exist - CentOS 5

Jun 1, 2009

I have just configured CentOS server my new office. This is the first time I am using CentOS.

Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.

To achieve this, what Do I need to do?

The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?

View 2 Replies View Related

CentOS 5 Server :: PHP Not Found On Apache 2.2?

Apr 16, 2011

I have installed apache 2.2 from source and it works prefectly.

I compiled and installed php 5.2 but php pages resolve to page not found.

I checked the logs but did not find anything also apache has loaded the php5 module successfully.

Below is the apache configuration

[URL]

View 3 Replies View Related

CentOS 5 Server :: Vsftpd - Working With NFS Server As Home Directory

Aug 31, 2009

OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1

I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.

When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.

View 1 Replies View Related

CentOS 5 Server :: Cannot Create Groups In Directory Server?

Feb 25, 2010

I have a centos 5.4 64-bit machine. I installed the directory server following those steps.
I then added some users using the Centos Management Consolecentos-idm-console -a http://localhost:3890 &

View 3 Replies View Related

Fedora Servers :: Can't Upload File To Empty Home Directory

Feb 1, 2009

I just installed FC10 and then used yumex to install the vsftpd FTP daemon package. I'm using the vsftpd.conf file that came with the distribution, and its almost identical to one I copied from my FC2 machine's working set-up. When I try to FTP in as a known system user I'm presented with my home directory /home/myusername/. The directory appears empty to the FTP program, but isn't in reality. I can't upload a file to the empty home directory. I can move up the directory hierarchy to /home/, but again that appears as an empty directory.

I don't think it's a vsftpd.conf file issue. I've tried everything I can there. Could it have something to do with permissions? I fiddled with those, but couldn't make an FTP directory listing work.

[code]....

View 5 Replies View Related

Ubuntu :: My Root Directory Is Empty - View A Log Before The System Crashed?

Jul 15, 2011

I wasn't doing anything special on my computer (Ubuntu 11.04) when it just turned off. When I rebooted I was presented with BusyBox. I'm still pretty new to linux, but it appears that root is totally empty. Is there a way to view a log before the system crashed?

View 9 Replies View Related

General :: Can't Empty The /tmp Directory Read-only File System Warning

Mar 2, 2010

Does anyone know why files in my /tmp directory are not able to rm even using root login? not only that, I can't even chmod or do anything to files in /tmp directory... it always saying "read only file system" warning

View 8 Replies View Related

CentOS 5 Server :: Installed Lighttpd - Get 404 Not Found In Browser

Jul 31, 2010

This is what I did till now and all was installed with success:
yum update
wget [URL]
yum install lighttpd
chkconfig --levels 235 lighttpd on
/etc/init.d/lighttpd start
Must I configure something else too? if yes... what?

View 2 Replies View Related

CentOS 5 Server :: Directory Server - Certificate ?

Aug 26, 2009

I have CentOS Directory Server running on CentOS 5. I try to add certificate, issued by our CA. I made an certificate request, and I got the certificate. I installed it, but I forgot to install the CA Certificate. Now I got the following error:

View 2 Replies View Related

Software :: CentOS 5.3 VM With Ntpd, No Server Suitable For Synchronization Found?

Jan 8, 2010

I cant get ntpd to synchronize with the ntp servers. I have a CentOS 5.3 32 bit Virtual Machine. I'm in USA on Pacific Standard Time. Here's all configuration and other important information for troubleshooting. Is there anything wrong with my config? btw, I used wireshark to look at the UDP packets - I dont get any responses from any of the servers back. I only see requests going out from my server, but no response. Is this a firewall Issue? If it is, then do I need to just enable UDP port 123 on the firewall?

[Code]...

View 4 Replies View Related

Server :: Sendmail M4 Configuration Base Directory /usr/share/sendmail-cf Was Not Found

Nov 1, 2010

I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message

Quote:

The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have

Quote:

Sendmail M4 base directory = /usr/share/sendmail-cf

which is not there. I did a locate / sendmail-cf on the command line, it finds nothing

View 17 Replies View Related

CentOS 5 :: Strange Message When Running Yum?

Jun 22, 2009

I recently reinstalled CentOS, and after a ton of updates, I'm just about finished getting things set up again. However, today I've noticed this really interesting message whenever I run yum. Just for demonstration, I'm going to remove gnome-screensaver, since I prefer the Xscreensaver anyway. This is the complete output, with the strange message highlighted;$ sudo yum remove gnome-screensaverLoaded plugins: fastestmirrorSetting up Remove ProcessResolving DependenciesThere are unfinished transactions remaining. You might consider running yum-complete-transaction first to finish them.

--> Running transaction check
---> Package gnome-screensaver.i386 0:2.16.1-8.el5 set to be erased
--> Finished Dependency Resolution

[code]....

View 2 Replies View Related

CentOS 5 :: Strange Boot After 5.4 To 5.5 Upgrade

May 18, 2010

Upgraded two systems yesterday without problems but now have a strange problem with a third. The upgrade went well I think but the kernel hasn't upgraded. Its installed and grub.conf has it listed as the default but after a reboot ( many times now ) the kernel version is unchanged.

View 13 Replies View Related

CentOS 5 :: Mounting A Directory From Different Server?

Jun 11, 2009

I am quite new to linux so pleas be understanding :) Here's my problem:

I have a server: A with some directory dirA/ I want to have an access to that directory on server B.

I was reading about "mount" but its very ambiguous for me.

View 4 Replies View Related

CentOS 5 Server :: Host Or Domain Name Not Found. Name Service Error : Postfix?

Jun 7, 2011

Tearing my hair out on this one a little bit, having problems sending message from web based PHP form to user inbox.I keep getting: Undelivered Mail Returned to Sender<me@mydomain.co.uk>: Host or domain name not found. Name service error for name=mydomain.co.uk type=A: Host not found.Running these commands:

$ hostname = mydomain.co.uk
$ hostname -f = mydomain.co.uk
$ postconf -n =

[code]....

View 6 Replies View Related

CentOS 5 :: Strange Files In Folder Structure All Around ( -z )?

Feb 10, 2011

I am currently seeing strange files in the folder structure on one of my servers * CentOS release 5.5inal)* #1 SMP Tue Jan 4 17:11:58 EET 2011 x86_64 x86_64 x86_64 GNU/LinuxThe files in question are as follows : -rw-r--r-- 1 root root 117 Feb 3 16:57 -z present in too much random directories when i list a file structure even in a directory i have not been in there is such a file in it.Has anyone ever encountered this type of factor and if possible i would like some advice on dealing with the removal of these files and rectifying the settings that are making them / creating them.

View 2 Replies View Related

CentOS 5 :: Live USB Strange Modified Binaries?

Mar 10, 2011

I have CentOS 5.5 running as a desktop, on Live USB with persistent overlay. It's been working great since January. However yesterday I noticed something strange. Almost all the binary files, including those under /bin, /sbin, /usr/bin, and /usr/sbin, have been modified, compared to the originals in squashfs.img (I mounted squashfs.img and did a "diff -r" comparison). The timestamps all remain the same, but the sizes of the binary files have been increased by a typical 1 - 3 KB.

The system has never been updated, other than a few minor package installations via yum. It's running behind a firewall with no services except an SSH server on a non-standard port. Checks on log files etc. didn't find anything suspicious, and chkrootkit turned up nothing.

View 4 Replies View Related

Server :: 389 Directory Service Setup On CentOS 5.5

Feb 1, 2011

I am trying to accomplish an objective, I need to get 389 Directory server installed in the process however is it possible to just have email addresses of users in the LDAP server? I have a primary domain, example 'abcefg.com' with about 3,000 users and several hosted domains like 'xyz.com' and 'mno.com'. The end goal is to speed up email processing, so instead of the Barracuda asking the email server(s) if a user exist it queries the LDAP.

Is there a way to configure 389 Directory Server to contain just the email addresses of the end users to allow the Barracuda to poll the LDAP server to verify the email address is valid. The rest of the authentication like password is handled by the email server. So in the end the LDAP server would just contain the email addresses (live) and the Barracuda would query the LDAP asking if joebob@abcefg.com exist if it does carry on. If user xxeedd@abcefg.com does not exist drop it and go on.

View 4 Replies View Related

Server :: Transfer The Profile Directory From Another CentOS Box?

Jul 14, 2011

I've tried to follow online tutorials about Samba PDC, I don't think I finished it well in CentOS 5.6 because when I tried to browse the profiles folder of the users in the home directory, the files doesnt appear. Actually the windows xp pc needs to restart before I can see the files, why is that? One more question, how can I transfer the profile directory from another CentOS box that will act as the storage of the roaming profile of the users? I use this in configuration smb.conf

workgroup = POGI.work
server string = Samba PDC Server
netbios name = samba
local master = yes

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved