I am trying to setup a chroot with a sshd service running. when I start the sshd in the chroot and login I get this message. Can not find anything on google.
[damien@dev ~]$ ssh -l damien localhost -p 2233
damien@localhost's password:
Last login: Tue Jul 21 13:32:52 2009 from 127.0.0.1
debug3: PAM session not opened, exiting
Connection to localhost closed.
[Code]...
I have problem with sshd server, its authenticate user and then terminate the session. Here is debug log:
Jan 1 04:26:41 server sshd[29677]: debug1: userauth-request for user root service ssh-connection method none
Jan 1 04:26:41 server sshd[29677]: debug1: attempt 0 failures 0
Jan 1 04:26:43 server sshd[29677]: debug1: userauth-request for user root service ssh-connection method password
Jan 1 04:26:43 server sshd[29677]: debug1: attempt 1 failures 0
Jan 1 04:26:43 server sshd[29676]: Accepted password for root from xx.xx.xx.xxx port 50971 ssh2
Jan 1 04:26:43 server sshd[29676]: debug1: monitor_child_preauth: root has been authenticated by privileged process .....
hypothetically speaking, can i write a script in which a telnet session is opened and then some more commands are forwarded to that session?
View 4 Replies View RelatedIf I ssh from my laptop (running F10) to the server (centos 5.2) it asks for the password, but everytime I enter the correct password it says incorrect password. when I do the same from the server to my laptop I can get in just fine. I think my passwords are stored as ssha in the LDAP (I tried clear passwords and that dosen't work either).
View 1 Replies View RelatedI started firefox from terminal ,It exits again again giving the following messages
Code:
pure virtual method called terminate called without an active exception
/usr/lib/firefox-3.0.16/run-mozilla.sh: line 131: 7168 Aborted "$prog"
[code]...
I got this script that backs up a server and then keeps only the last 10 backups and removes the rest.Problem is, the part where it deletes any backups older than the last 10, it never reaches that. I'm guessing it is because the ftp session somehow exits the script entirely, especially if there is a problem with the ftp session. But just to make sure, I'm wondering if you all can look at the code to see if I am making it exit accidentally.Here's the code. I left out data like ip address and directory/file names for my security purposes.
Code:
#ftp in and grab the file
ftp -in xx.xx.xx.xx << EOF
[code]...
I go and restart ssh and I get this weird message. thought I should be getting ok or fail message, at least thats how I remember it. What do you think?nate@universal-mechanism:~$ sudo service ssh restart
View 3 Replies View RelatedI installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.
View 4 Replies View RelatedI have a problem - "ssh - debug3: no such identity:"
I tried to connect copssh at 192.168.0.2 and centos 5.4. x86 ssh at 192.168.0.4.
At 192.168.0.2,
Code:
ssh-keygen -t rsa (for ddisk-net_pc_p without password)
At 192.168.0.4,
Code:
mkdir -p ddisk-net_pc
mkdir /home/ddisk-net_pc/.ssh
chown -R ddisk-net_pc:users ddisk-net_pc
[code].....
I am putting together some new systems for my customer and I'm having some trouble with a script that we use to back up files to a DVD R. The problem is that I can't write a 2nd session to the DVD unless I eject the disk and reload it. The drives are slimline type drives, Sony BD-5730S and Teac DV-W28S-V93, so they won't reload without human intervention. Opsys is CentOS 5.4 or RHEL 5.4. I've tried both AMD and Intel based mother boards. If i try this on Fedora 11 or 12 it works fine. This works on IDE attached drives but not a SATA attached drives. Fedora appears to use something called genisoimage instead of mkisofs. I can't get genisoimage to run on CentOS or RHEL.
Here's the code to setup the test files:
rm -f /tmp/BDtest/*
mkdir /tmp/BDtest
dd if=/dev/zero of=/tmp/BDtest/blank.iso bs=10M count=1
for NUM in {1..160}
[Code].....
How do I get SSHD to log EVERYTHING to it's own log file? I tried this in sshd_conf:
SyslogFacility SSHDLOG
LogLevel DEBUG
I am just customizing CentOS and would like to change "Welcome message[image is attached] to something that I wanted. I went trough the anaconda source rpm and found that OS name is being picked by %s and not sure what %s refers to or where is that variable it pointing to.
View 2 Replies View Relatedwhen a message gets sent to me I always get this message in my maillog. What does this mean and how can I fix it?
srvspam amavis[2474]: (02474-06) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100907T102651-02474/parts: lstat() failed: Permission denied. ERROR srvspam amavis[2474]: (02474-06) WARN: all primary virus scanners failed, considering backups
recently we decided to make our own panel (like Plesk or cPanel) but for Ubuntu and it will be licenced under GPL (like any other professional sofware).want to make a panel not only that fits our needs but also the needs of other system administrators and domain owners. We researched other panels and found out that non of them has security/look/ease of use in one package. Bad codig is another problem found in other panels.I made a short overwiev of what I think we have to have in the beginning.I Security :1. Completely chroot enviornoment where every single service is in chroot mode (bind,mysql, postfix, .... )2. Easily managed IPtables trough web-based interface. 3. Coding rules has to be strict.
II Software selection :
1. MTA - Postfix
2. POP - dovecot
[code]....
I have openSSH installed and wish to log on to my Centos container (hosted by switchlinck.co.uk) from my Windows PC using putty. I can log on fine using by entering my username and password, but wish to use an rsa key to log on without a password. I have managed to create the keys with putty, and ammended them to work with openSSH. However, I am unable to find the authorized_keys file to put the key into. SSH is running but that file does not exist in /etc/ssh. When I read different how to sites for this, they all point towards ~/.ssh. I do not have a .ssh directory anywhere on the system. I have tried creating different users but still can not find this directory.
View 2 Replies View Relatedive created user in my server for vsftp and they are chroot when they use the ftp but not when they use the shell. How to chroot them into the shell?
View 3 Replies View RelatedMy fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
Our server is a x86_64 centos 5.5 computer. we installed samba3x-3.5.4-0.70.el5_6.1.x86_64.Samba seems work fine, we don't notice any problem in using it. But in the workstation log file, there are a lot of error messages like:
[2011/08/26 14:37:57.682260, 1] smbd/service.c:678(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
[2011/08/26 14:37:58.194394, 1] smbd/service.c:678(make_connection_snum)
[code]....
I am trying to set up an SFTP server. I can log on to it with no problem. But our trading partner for whose benefit we want it cannot. They are unable to make a connection. Here is what happens when they try:
Error: Could not open connection to `ogxxxsft@subdomain.domain.com':
Could not connect to `subdomain.domain.com': Unable to connect to
server
[code]....
I want to install MATLAB 2009 on a ubuntu server 10.04 amd64 which has NOT any gui. The installation was successful however when it comes to activate, it says "Could not open display. Exiting.". Here is what I did:
1- ssh -X user@server
2- verified that I can see "xclock" and "xcalc". Yes I can see...
3- cd /mnt ; ./install
4- I can see the GUI wizard since the X11 forward is working. Installation done successfully.
5- cd /opt/Matlab/bin ; ./activate_matlab.sh
it says: Could not open display. Exiting.
One of my servers needs to issue an "apt-get update" command on each of the clients in a lab. However, after the first update, it exits. In trying to replicate the problem with a simpler script, I created the following which fetches the listings of multiple directories from a client:
NUM=0
cat paths | while read DIR; do
ssh server-name ls $DIR > /tmp/$NUM.txt
NUM=`expr $NUM + 1`
done
Again, after the first iteration, the script exists. I tried the following line too, but it made no difference:
bash -c ssh server-name ls $DIR > /tmp/$NUM.txt
The only thing that worked so far is this
xterm -e ssh server-name ls $DIR > /tmp/$NUM.txt
I cannot ssh into an RHEL 5.5 server (192.168.20.104) from another RHEL 5.5 server (192.168.20.101) unless server debug is turned on 192.168.20.104, and even then, I have to wait several minutes before the connection is established. scp to and from the 104 server is also not working.Here is the debug output on the 101 server when server debug is not enabled on the 104 server-:
Code:
[applmgr@tclg-clone-01 ~]$ ssh -vvv 192.168.20.104
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
[code]...
I have been a BSD guy for years, but I am now shifting over to CentOS for my first server build.
So far so good, all has been relatively painless and in fact a heck of a lot simpler than I anticipated!
Everything seems to have gone ok except a small problem with Bind. At some point during setup, I accidentally ran "yum remove bind-chroot".
When I tried to run "yum install bind-chroot" I got told "No package bind-chroot available" which was odd.
Anyway, I managed to find the rpm for bind-chroot and installed it that way. Now I see that there is a bind update available
Unfortunately the rpm I installed now has a dependency for the current version of bind which I can see being a headache everytime bind needs updating.
So, can anyone help me get back bind-chroot the proper way? code...
I am sending message from linux to windows system as follows echo "test"|smbclient -M <IP Add>But I am getting "session request failed" message . How can I solve it? <Ip Add> in network and reachable.
View 1 Replies View RelatedIn centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
I've got Fedora 14 running on an EBS volume on Amazon EC2. I've created a few users and enabled port 22. When I set a password for these users, they can successfully ssh into the instance; even if they logout and login again....until:
If I reboot the machine, they can no longer ssh into the machine (permission denied). If I issue the passwd <user> command and change their passwords, they can login again....until I reboot the machine at which time they cannot login again until I change their passwords. The problem exists even from the machine. That is, if root attempts to ssh into 127.0.0.1 using their username/password, the same problem/resolution exists.
system: centos 5.5 Kernel 2.6.18-194.el5 freshly installed. bind is configured in chroot environment out of the box. placed named.conf in /var/named/chroot/etc and my zone files in /var/named/chroot/var/named.
[Code]...
I have a Redhat fedora core release 6 (2.6.22.9-61.Ns4) server and form time to time ssh fails although I am still able to ping the device and with a reboot the device will start working correctly so upon further investigation it appears the sshd daemon fails.Not knowing a great deal about Linux I thought I would ask some advice on the path I am thinking of taking. The first would be to put an entry in the cron to try and start the ssdh every hour or so. Would this cause issues in the long term run it multiple times when the sshd daemon was still running?
The Second though I had was having a bash script to check if the process was running and if not restarts it and if it was just exit the program which would seem like a neater way to do it but this is where my limited Linux knowledge hits a wall so was looking for suggestion on how to implement this?
At first I thought that the following command will restart my sshd server:
/etc/init.d/sshd restart
but there is no "sshd" server in this directory.
How else do I (re)start the ssh server? How can I get the version/release number of the sshd server? Where (in which directory) should I put SSH keys?
I want to make sure sshd service will start after a server reboot. On redhat or centOS I can do "chkconfig sshd on". What's the equivalent command for ubuntu?
View 1 Replies View Related