Ubuntu Networking :: Loadndisdriver: Load_driver(358): Couldn't Load Driver Netr7364?
Jun 24, 2010
I'm trying to use ndiswrapper to use a windows driver (netr7364) on ubuntu for my ralink wireless adapter.owever, it fails to load, giving this message in syslog after starting it with "sudo modprobe ndiswrapper":
Code:
Jun 24 17:58:47 roosh-desktop kernel: [ 921.765989] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
Jun 24 17:58:47 roosh-desktop kernel: [ 921.910039] usb 1-7: reset high speed USB device using ehci_hcd and
[code]....
View 3 Replies
ADVERTISEMENT
Feb 16, 2011
how to load the onboard lan driver?
View 2 Replies
View Related
Aug 3, 2011
I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder
View 5 Replies
View Related
Sep 7, 2010
My wifi card is DWA-525 I found the drivers and compiled them using make and make install How do I remove the default driver rt2800pci and load the new one?
View 9 Replies
View Related
Feb 18, 2010
I have a 4 disk Raid 10 with Windows 7 installed & working. (Win 7 sees this as 1 disk.)
I installed 9.10 onto a 5th disk, but I think that ubuntu saw the Raid 10 as 4 separate disks and wrote the boot loader to hd0- I had to rebuild my array & I couldn't load 9.10
For the second attempt, I disconnected my Raid 10 and 9.10 is now alive & well on the 5th disk, (presumably with the boot loader on the same disk). Both Win 7 & Ubuntu 9.10 now work but I have to steer to the required disk via the bios for loading.
I'm reluctant to play with the boot loader (GRUB?) from 9.10, because it doesn't seem to like my Windows disk array. Would something like EasyBCD (used from Win 7) be an option?
View 3 Replies
View Related
Jan 4, 2011
I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -
[Code]....
View 6 Replies
View Related
Sep 25, 2010
I have a:
# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
I have verified the cable and it's good the windows machine next door is fine using it without packet loss.
The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).
View 1 Replies
View Related
Dec 27, 2010
I have been having a couple of problems with various programs, and though I have read some threads that addressed the issues, they haven't solved myproblems.Keeping in mind for this, I have the 10.04 lucid version of Ubuntu.Now, a few days ago, Transmission decided to stop downloading songs. Transmission says that a port is closed, and I'm not entirely sure that that is the problem. Still, I attempted to go into my modem, and it didn't work. The page wouldn't load. I tried to get into my firewall, and I couldn't figure out how. A friend of mine who also has Ubuntu gave his Transmission a try, and it worked. When he checked the port, it also said that it was closed. So, I have no idea what the problem could be.Second, I have a Creative Zen Mosaic EZ300, and have been trying to get software to use it on my computer. I can sync to it, and add songs, but I can't delete or edit anything. I tried gnome, but it didn't recognize the player.
View 5 Replies
View Related
Apr 26, 2011
I have been using ubuntu 10.10, on LG X120 Netbook, for a few days now and everything was working OK. today, when i powered the system, i suddenly got this dos like screen:the last rows just kept going and going, wouldn't load ubuntu at all! after restart, i got few options to choose, but no matter which one i picked the above just kept happening!since it was kind of a fresh start, i just decided to reinstall ubuntu and save myself the trouble. i used a flash drive, just like last time. but again, i ran into problems! in the installation processes, it just keep like "thinkng' and nothing happens and it won't advance! you can see at which point it happens: I ran memtest, and if it matters anything, i got errors:but like i said, everything worked fine until today, and i didn't change anything! how can i fix this?
View 2 Replies
View Related
Jan 29, 2009
I upgraded from 9 to 10 and now i can't use firefox it says "couldn't load xpcom" anybody know what i could do..
View 3 Replies
View Related
Sep 1, 2011
I recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop
How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)
View 5 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Apr 3, 2011
I'm having an issue and I'm trying to figure out if the proprietary driver from ATI is actually getting installed correctly or if I'm on the open source driver still. ...and whether or not there's an advantage to one over the other...
I'm on a Sager NP3790 with an ATI Mobility Radeon 9700 graphics card. I've got a fresh install of Ubuntu 10.10 and the basic 2d functions all seem fine, but any games I try to run with OpenGL simplt fail and "glxinfo" yields:
Error: couldn't find RGB GLX visual or fbconfig
lspci -k yields:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Subsystem: CLEVO/KAPOK Computer Device 0471
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
I have downloaded the latest legacy driver from ATI (ati-driver-installer-9-3-x86.x86_64.run) and I've not had any success running that directly. It appears to not knowingly support anything newer than Ubuntu 9.04. I have tried forcing that driver to build itself targeting 9.04 and I've tried installing the .deb packages that it produces, but with no luck there either.
If I recall this laptop's former lives, it has in the past run Eternal Lands without issue back when it was Ubuntu 8.x, but somewhere between a client update from them, some update from ATI or Ubuntu I seem to have lost my OpenGL capabilities.
View 5 Replies
View Related
Nov 13, 2010
create a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
I've tried setting SElinux to permissive mode.
Fedora 14 X64
hypervisor qemu
XML:
[code]...
View 2 Replies
View Related
May 28, 2010
I have a USB TV tuner ( USB ID 15a4:1001) which Ubuntu (KARMIC) insists is a HID device..
Quote:
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
[Code]....
View 4 Replies
View Related
Jun 17, 2010
Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that
Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8
[code]...
how do i get the driver to load.
View 9 Replies
View Related
Aug 14, 2010
im trying to get compiz to work but i cant even get nvidia graphics to load ive tried everything this is for a m11x alienware computer running ubuntu 64 bit drivers are installed but wont work
View 2 Replies
View Related
Aug 29, 2010
i'm using lucid lynx. it is a dual boot machine, vista and lucid lynx. i have switchable graphics (at least it is available in windows), intel and ati. ubuntu was working fine but then a pop up showed up asking if i want to install ati drivers. the pop up "said" that drivers were proprietary yet tested on linux systems. i decided to install them. i was asked to reboot after installation which i did. now every time i select ubuntu in the grub the system loads but then it suddenly stops and i get a blank screen.
View 3 Replies
View Related
Jan 16, 2010
The problem: I am a poor man who until today was running WinXP on AMD64 using an old usb wireless wusb11v4 adapter (32 bit drivers). I have recently installed the Ubuntu 9.10 AMD64 release. But I cannot use ndiswrapper to load my 32 bit wusb11v4 driver because of the 64 bit os vs the 32 bit driver. I can hardly buy a new wireless adapter. But I do not see an AMD32 bit release.
View 3 Replies
View Related
May 8, 2010
I wanted to know if there is any way of adding a driver that i compiled during boot apart from adding it in
Code:
/lib/modules/<kernel version>/kernel/drivers
It works fine till i update to a newer kernel...then i have to add it in the new kernel file....so is there a permanent method?
View 3 Replies
View Related
Oct 4, 2010
I am having a problem with this diabolical piece of kit on a laptop with Ubuntu 10.04. It never did work very well (max 800x600) was as good as it got.
It is now not working at all except in safe mode.
Th drivers appear to be there but not loaded.
So I downloaded a driver and tried to install it (sorry about the Portuguese but it is fairly easy to work out that it is a conflict with xserver-xorg-video-5):
There appear to be proprietary drivers written by a SiS employee but they are not distributed except to manufacturers[url]
Where do I go from here? I really would like better than 800X600, 3D would be a very nice bonus.
View 1 Replies
View Related
Jan 14, 2011
I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?
View 3 Replies
View Related
Mar 30, 2011
How can i load the driver for NIC in RHEL
View 2 Replies
View Related
Oct 30, 2010
I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
View 1 Replies
View Related
Mar 28, 2011
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies
View Related
May 1, 2011
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
View 5 Replies
View Related
Mar 22, 2011
I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.
Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)
I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.
How can I get KDE back and running, using either the proprietary or the open-source driver?
View 2 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Feb 22, 2009
How do I properly load/install
alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)
View 19 Replies
View Related
