CentOS 5 Networking :: Install DFE-550TX , Network Device Of D-LINK?
May 5, 2011I'm trying to install DFE-550TX , network device of D-LINK, with no success. I'm using CentOS 5.6.
View 1 Replies
ADVERTISEMENT
Hardware :: D-link DFE-550TX NIC Card Not Recognized?
Apr 10, 2011I have RHEL 4u6 in P4 machine, but somehow network card (D-link DFE-550TX) is not working on it. BTW machine is dual boot, and the same card is working under Windows.
View 12 Replies View RelatedCentOS 5 Networking :: Error "SET Failed On Device Wlan0 ; Operation Not Supported' When Configuring D-Link Wlan Card
Nov 15, 2009I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
CentOS 5 Networking :: How To Install The Link Layer Topology
Jan 11, 2010I was wondering how to install the Link Layer Topology on CentOS 5. I have installed the lld2d daemon from a Debian how to after compiling it. It seems to be running but it is not talking to the Windows 7 network mapping.
View 2 Replies View RelatedFedora Networking :: Open The Network Device Control To Activate It But There Is No Network Ports In Network Device Control?
Jan 7, 2010I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedUbuntu :: Link To File On The Host System - Error "Invalid Cross-device Link"
Oct 25, 2010I installed 10.10 using wubi (Host system is Win XP). I want to create a symbolic link of a file on the host system (Windows c:abc.doc file) in my Ubuntu home ~/ directory.
When I type command ln /host/abc.doc abc.doc It gives me following error ln: creating hard link `abc.doc' => `/host/abc.doc': Invalid cross-device link
CentOS 5 Networking :: Link Domain To VPS?
Nov 15, 2009So I recently purchased a VPS and had CentOS strongly recommended by a friend for my servers OS. I have a server, and one IP.
My /etc/resolv.conf reads...
nameserver 203.98.68.110
nameserver 203.98.68.210
CentOS 5 :: Link For Instructions For Full Cd/dvd Install?
Jan 14, 2010link for instructions for full cd/dvd install?
View 2 Replies View RelatedCentOS 5 Networking :: Can't Install Network Printers?
Nov 3, 2010I can't install printers shared by a computer running Windows 7, I try to add a new printer using samba, it shows me the other computers but I cant see any printers.
View 4 Replies View RelatedUbuntu Networking :: D-link Dwa 130 Can't Connect To Network / Sort It?
Aug 28, 2010I just bought this usb wireless adapter. (I also have a mac using wireless here and it works fine.) I installed ndiswrapper and ndisgtk and then used it to open the .inf file on the driver cd that came in the box. It must have worked reasonably well because if I click on network manager, I can see a number of networks, including my own. However, when I enter the security key for my network the icon spins for a while and then it asks for the key again. I've tried repeatedly and it never connects. I am definitely entering the key properly because I re-entered it on my mac and it worked.
I have attached a document with most of the information requested in the sticky.
Fedora Networking :: 3G USB Modem Has Wrong Device Port In NM - Change Device Port In Network Manager?
Aug 14, 2009I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedCentOS 5 Networking :: No Link Lights On Any Nic Poweredge 4400
Aug 24, 2010I'm running a Poweredge 4400 with a 3com card and an intel card covered under e100.
I'm using centos 5.5 in its default server config coming from gentoo.
I have no link on either of the two interfaces, ever. The card initialises with ADDRCONF(NETDEV_UP): eth0: link is not ready and then falls back to half duplex but still with no connection.
I have manipulated most of the general settings that can be changed with ethtool.
Set to manual configuration with 100/full duplex
The cards are recognized alone and together. I have setup static interfaces with no problems. The ping to the local interface such that:
nic = 192.168.1.10
ping 192.168.1.10
we get back route times and all is well
ping 192.168.1.1
no route...
I have tried several different cables verified good other connections. I have verified the ports I am connecting to work correctly. I have manually shut down the onboard nic (in bios) and tried the 3com card alone. I have tried pci=routeirq, thinking there might be an irq issue.
If this was just the one card, I would install another and move on, but both nics are acting in exactly the same way.
CentOS 5 Networking :: Use D-Link AirPlus ExtremeG+ DWL-G650+?
Oct 19, 2010For connect myself to Internet I use the wireless because I don't have the LAN cables connection at home....so I use a Wireless Cardbus Adapter. The wireless cardbus that I use is an D-Link AirPlus ExtremeG+ DWL-G650+ Can I use wireless or I'll remain isolated from the Internet? Where I can find the file for install and make run it?
View 2 Replies View RelatedCentOS 5 Networking :: Shutting Down Interface On Link Down State?
May 17, 2011I have a problem. I want interface to shut down once there is a link down state detected. If you set up eth0, and then plug cable out, eth0 stays up, just loosing the RUNNING flag. I want it to go down completely.
I've stumbled upon netplugd, and I've tried using it. It is a daemon that detects states in (link up) and out (link down) from kernel netlink interface. If I have this daemon up, it detects that link is down (eg. cable removed from interface), and it runs correctly /etc/netplug.d/netplug eth0 out. That script then runs ifdown eth0. And that's ok.
But very next moment netplugd runs /etc/netplug.d/netplug eth0 probe, and probe section of that script runs "ip link set eth0 up", which then turns interface back on!I've tried commenting out that line, but then new problem occurs - after the link is up, netplug cannot figure that out and bring back interface. Has anyone have this kind of problem, and any viable solution with netplug?
CentOS 5 Networking :: After Install Cant Surf The Net - No Devices For Network
Sep 12, 2010I installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedGeneral :: CentOS - Determine IP For Network Device
Sep 20, 2010When CentOS boots up, it tries to determine the IP for a network device (eth0) and fails.
'Determining IP information for eth0... failed; no link present.'
I'm curious to know how, after booting up, I could set the IP information for a wireless device, wlan0, manually. Another way of putting this questions is: if CentOS is able to determine IP information for a network device on bootup, what settings is it configuring exactly?
Ubuntu Networking :: D-link DWL-G122 Connected To Network But Can't Download?
Jul 8, 2010I had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.
View 6 Replies View RelatedUbuntu Networking :: Symbolic Link Paths Don't Work Over Network?
Sep 17, 2010like to create symbolic links on our server which will work from any work station.I guess the problem is that they use absolute paths.Since the absolute path is different from each workstation, they don't work except for the computer on which they were created.Is there a way to make them use relative paths instead?
View 2 Replies View RelatedUbuntu Networking :: TP-Link Wireless Adapter (USB) On 11.04 - Not Connecting To Network?
May 19, 2011i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
CentOS 5 Hardware :: How To Install D-Link Model:DU-562M USB Modem
Oct 29, 2009i'm currently having trouble installing my D-Link DU-562M USB Modem in Centos 5.3. That is, my modem is not detected. When i issue the command ls /dev/tty*, i can't see any node pertaining to /dev/ttyUSB0 or more.. what should i do to make my modem work?
View 17 Replies View RelatedCentOS 5 Hardware :: Install Wireless Card (D-Link) & Yum Doesn't Run
Mar 6, 2011what I need is : 1/ make run the wifi USB card D-Link DWA-110
2/ I saw I had problems with yum: when I launch the "add/remove programs" button in the menu, if the "c5-media" item is checked (and only this one) and the DVD of centOS is in the drive, then I have this message : "cannot retrieve repository metadata (repomd.xml) for repository: c5-media. Please verify its path and try again" I specify I modified the /var/run/yum.pid file (removed the only number which was here)
the main issue for me is the yum failure, because it could be needed for the wifi problem. one thing after the other! the installation is totally new (except that I modified the yum.pid file).
CentOS 5 Networking :: Network Install / Static Changes To Dhcp In Anaconda
May 10, 2010I'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
View 1 Replies View RelatedCentOS 5 Networking :: Does Network Install Assign Pingable Ip During Installation
Jul 23, 2011Does a network install assign a pingable ip during installation? I am trying to verify why I get an error during installation that "stage2.img" cannot be found and I'm guessing that since I can *not* ping the static IP I assigned, that the network functionality is not working during the install process. Can anyone confirm if I should be able to ping a system during installation using the assigned static IP?
View 1 Replies View RelatedUbuntu Networking :: D-LINK DWA-556 Wireless N PCI-E Network Card Works With Lucid 64 Bit?
Jun 8, 2010Could anybody confirm that the D-LINK DWA-556 wireless N PCI-E network card works with Lucid Lynx 64 bit? Im looking for a reliable wireless network card that if possible works out of the box on Lucid 64 bit, so far my search has lead me to the above card, If anyone has hands on experience of this card on lucid 64
View 2 Replies View RelatedUbuntu Networking :: Can't Load The Drivers For Tp-link Tf3200 Network Adapter
Feb 26, 2011I have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.
pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver
pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all
sudo: unable to resolve host paghomelinux
[code]....
Ubuntu Networking :: Wired Network Connection Lowers Link Speed Repeatedly
Apr 1, 2011I believe I'm running Kubuntu 10.04, but don't quote me on that. Here's the version string from dmesg. Linux version 2.6.32-31-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #60-Ubuntu SMP Thu Mar 17 22:15:39 UTC 2011 (Ubuntu 2.6.32-31.60-generic 2.6.32.32+drm33.14 I have an emergent problem with my wired ethernet resetting the connection on a frequent basis. When it resets it re-negotiates the link speed and I often end up with a 10Mb/s link and on some occasions a 100Mb/s. The configured speed for the link is 1000Mb/s full duplex using a preup ethtool command. I do not use NetworkManager but have the interface configured in /etc/network/interfaces.
[code]....
Ubuntu Networking :: TP-Link AR922X WLAN PCI Card - Can't Join Into The Network After Typing The Password
Jul 5, 2010I've just got a TP-Link wn-851n PCI WLAN card, and the problem is that ubuntu can search for the network, but I can't join into the network after typing the password. I'm sure that it is correct as m Windows notebook is also using that network.
Taking a look in dmesg, and it start to loop this message after I joined the network.
Quote:
Ubuntu Networking :: Mount To Vista Needed For Apache - Symbolic Link Not Allowed Or Link Target Not Accessible
Apr 26, 2010I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
Fedora Networking :: Atheros AR2413 FC10 - D-Link Wireless Adapter Worked Fine With Network Manager Disabled
Mar 3, 2009I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
CentOS 5 Networking :: Kernel Rpm Install After Error "Bringing Up Interface Eth0: Device Eth0 Has Different MAC Address Than Expected, Ignoring"
Dec 26, 2010i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View Related
