Ubuntu Networking :: D-link DWL-G122 Connected To Network But Can't Download?
Jul 8, 2010
I had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.
I was wondering where to find the drivers for my D-link adapter. It says on the box that it has Linux support, what does that mean? I have already used it without any drivers and it works for a bit but after a week or something it doesn't work anymore (it is connected to the network but no download). What should I do? Would installing the drivers solve the problem?
I trying to connect my linux machine( kernal 2.6)with a D-Link WBR-1310 router (Firmware fully updated). Internet was working on the computer when it was connected to other network. DLink is DHCP Server enabled. The XP boxes had no problem connecting to the internet automatically. My linux box was having trouble (absolutely no network detection.) on D link and port of linux lights are green. for the Wired Connection I set the configuration to Automatic Configuration (DHCP). I was unable to ping my router at 192.168.0.1 (Destination Host Unreachable).I'm not sure what to do, but I suspect it may be the DHCP client settings.
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
Installed 10.10 using wubi. My wireless NIC is not detected in ndisgtk (although the driver: PRISMA02.inf is installed). The lights on the DWL-G122 are on normally while operating under Windows XP, but turn off after it's unplugged and plugged back in under Ubuntu.
EDIT: I've attached an image of my wireless NIC so you know what I'm dealing with.
as per pytheas22, i'm attaching few details here. my download speed would starts at 470 kB/s and gradually decreases until it reaches 116 kB/s. Loading web pages seems to be fine.
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
On the 25th of January, one of my computers randomly stopped being able to connect to the Internet. It was running a dual boot (Ubuntu 10.04.1 LTS & Windows XP SP2), and is connected to the network via an ethernet cable (no wireless). According to the Network Manager, everything is working okay (there was no change from when I was able to access the Internet).
When I would use Firefox, I would get the message "Waiting for (page)...". However, this is not a Firefox only problem, as every program requiring Internet access (e.g. Evolution) is unable to connect to the Internet.
I compared the Internet settings to those of my father's Windows XP SP1 computer, which is able to connect to the Internet. There was no difference, except for the IP Address and Hardware Address. Because of this, I incorrectly deduced that either the actual Ethernet cable or the wall plug was faulty. I tried using a different cable and connecting to the Ethernet wall plug used by the aforementioned computer. Nothing changed. I was still unable to connect.
I didn't worry about it until Tuesday, when my other computer had exactly the same problem. It is running a triple boot between Ubuntu 10.04.1 LTS, Ubuntu 9.04 and Windows XP SP2, and I am unable to obtain Internet access using any partition. As with the previous case, my computer showed no change in the Internet settings, and the computer also shows it as being connected to the network. It is also connected via an Ethernet cable.
I have a Toshiba Satellite L505D-GS6000, and I installed Ubuntu before and it worked flawlessly until I decided that I had to go back to Win7 because of certain program compatibility issues.I'm back here trying to set it up and am having no issues except for with my wireless. I can see all of the SSID's, I am able to connect to my wireless, and it displays that I have been assigned an IP and all of the other settings given by DHCP.
I have been trying to fix this for hours, googled, searched these forums, and have spent time with some people on the Ubuntu IRC channel and we are unable to come up with a fix.
The strange thing is that although nothing will load when I try to visit facebook.com, google.com, or any other website... I opened the update manager and I noticed that it would download for 30ish seconds, stop and do nothing for 60ish seconds, resume for another 30, stop, resume, etc. until it finished. I am able to ping my router, and 8.8.8.8, but I am unable to ping [URL].
I just bought this usb wireless adapter. (I also have a mac using wireless here and it works fine.) I installed ndiswrapper and ndisgtk and then used it to open the .inf file on the driver cd that came in the box. It must have worked reasonably well because if I click on network manager, I can see a number of networks, including my own. However, when I enter the security key for my network the icon spins for a while and then it asks for the key again. I've tried repeatedly and it never connects. I am definitely entering the key properly because I re-entered it on my mac and it worked.
I have attached a document with most of the information requested in the sticky.
I'm using Wordpress on Apache localy to keep a diary (it's convenient because of the tags). When I'm connected to any network (be it wired or wireless) my Apache (and Wordpress, of course) works just fine. But as soon as I go offline, I can't access the web server neither through browser nor by telneting to the 80th port. Pinging localhost works just fine.Here is my ifconfig when offline and when online:Online:
Code: eth0 Link encap:Ethernet HWaddr 00:24:54:6f:07:aa UP BROADCAST MULTICAST MTU:1500 Metric:1
I'm having trouble pinging localhost, specifically, pinging localhost when I'm not connected to a network. When I try it keeps telling me the operation is not permitted:
Code:
matt@mubuntu:~$ ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted
if I connect to the network, start pinging then disconnect it continues pinging. Google seems to think it could be something to do with my iptables setup:
matt@mubuntu:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
But as far as I can tell there isn't anything in there which would stop me connecting to the localhost (I also can't connect to my local apache instance when offline)... (It's worth mentioning that a couple of weeks ago I had the pc setup to share it's internet connection with a laptop, ala this guide, however I've since disabled the iptables rules and disabled ip forwarding.)
I've installed Ubuntu 10.04 32 bit version(dual OS) on my 64 bit Pentium core2 duo 2.2GHz processor. Everything seems to be working fine except it's not getting connected to wireless network, although it's detected the network .It was working fine(got connected to wireless network) when I had installed the same OS via virtual machine.
I upgraded to 10.10 the day it came out, and haven't had any problems with internet stuff. My wireless card works without any proprietary drivers. Last night, the computer stopped connecting to the internet. I am still connected to my wifi network, but I can't do anything online. I had assumed that my internet connection was just down in general, and tried resetting the computer, shutting down the computer and then turning it on again, and rebooting the modem, but then my Xbox connected, and my laptop running 10.04 connected, so I'm confused as to what is going in. Any ideas?
I am using BSNL broadband ISP and I am able to get network on windows os but not on my ubuntu.( I have a dual boot). I see Auto eth0 connected from the notification but when i am pinging [URL]... it says unknown host.
My name is Dieter, from Belgium, new here. I installed suse 11.2 from the dvd. I bought a wificard that is supported under linux for this pc. Still my firefox does not connect to the internet. I set up the card in yast to dhcp. I find networks and can connect to them but that's where the story ends. This is some data, sorry for the layout, I have no experience in posting stuff in fora.figure out why i cannot connect to the internet?
like to create symbolic links on our server which will work from any work station.I guess the problem is that they use absolute paths.Since the absolute path is different from each workstation, they don't work except for the computer on which they were created.Is there a way to make them use relative paths instead?
i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
I have a WET54g bridge that I am trying to get connected to a wireless network that only allows DHCP. The idea behind it is that I would like to connect the Cat6 out of the bridge to a switch allowing multiple wired computers to connect to the wireless network. The bridge will easily connect to the network once I put the WEP key in, however, there is a kink after that. When I connect the Cat6 to my computer and request an IP for that computer, it self assigns. This tells me that it is not talking to the wireless network through the bridge.
I can not find which IP address the bridge was assigned so that I can talk to it. The sub net is 255.255.240.0 which leaves quite a few possibilities. I know that the bridge is, however talking to the wireless network because the light is steady on the front of it which indicates just that. One other thing to stack on is that I know that there is a "splash page" which comes up when any computer connects. You click on the agreement and then you are allowed onto the network. How can I get my computer to talk through the bridge to the wireless network?
Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code: $ uname -a Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
I just upgraded to 10.04 from 9.10 and I ran into few issues.
Laptop - Dell Vostro 1520 OS - Ubuntu 10.04 64 bit
Issue - My wifi connects to the network properly and shows connection established. But I am not able to browse. I tried ping and I didn't got any response. But I was able to get response when I use ethernet (wired connection) and I am able to browse. No issues with wifi card as my wifi is working properly from Windows and with the same network. I did a complete update again before posting this and it is yet to be resolved. Here are the output of some commonly asked outputs with wifi enabled and connected:
I just installed Ubuntu 10.04, 32 bit, yesterday on my Dell Latitude 6500E and I am new to Linux. I can't find my HP LaserJet 3015 on my home network, even though it is connected to a new Windows 7, 64 bit PC thru USB. The other Windows PCs find it fine, and all 4 PCs can see each other on the network. So, I installed the HP software (http://hplipopensource.com/hplip-web...all/index.html) and that went smoothly, but the printer is still invisible. I also added Samba and that works great like everything else. I plugged the printer in directly to my Ubuntu laptop's USB port and it printed instantly. Now, if I could just print to the LaserJet on the network. Anybody got this one figured out? Does Wine provide a way around this?
I have a network printer directly connected via ethernet cable to an Ubuntu netbook, but pinging the printer fails, giving "Host Unreachable". The network light on the ethernet socket is lit green, and there is nothing else cable-connected to the network - just a simple cable connection between the netbook ethernet socket and the Network printer (a HP Laserjet 4200n). Ping works fine if I plug the cable into a different machine (a Win XP box) and ping from there, so it's not a cable or IP address problem.
This sounds simple enough and should work, but I'm stumped. Clues, anyone?
configure a server with two network interfaces? This system is physically moved from one network to another every few days (different buildings but connected by a VPN). I'd like to be able to control the IP address of the system depending on which port I plug the network cable into with a static setting. Right now the system will connect to the local network, but any requests to go beyond the subnet get lost. The only way I can get the system to talk outside of its subnet is to comment out the second interface.
Could anybody confirm that the D-LINK DWA-556 wireless N PCI-E network card works with Lucid Lynx 64 bit? Im looking for a reliable wireless network card that if possible works out of the box on Lucid 64 bit, so far my search has lead me to the above card, If anyone has hands on experience of this card on lucid 64
I have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.
pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all sudo: unable to resolve host paghomelinux
I am trying to boot my laptop in text mode while it is not connected to a network. A message keeps popping up " eth0 ... negotiating". Does anyboy know how to turn it off? I tried "ethtool -s eth0 autoneg off. It still won't stop. I had tried editing /etc/sysconfig/network and turning off networking by NETWORKING=no. Still the same.
When I boot in the graphic mode, this problem of pesky message does not come out. I want to use the text mode since I will use my computer for editing documents and will be using vi only. In the text mode, when I plug it to a network, the persistent message stops but returns the minute I unplug the network. I want to use it unplug to the network since I will not have access to a network all the time. By the way, I am using Fedora 11. I am using a wired DSL network. My computer can do wireless but i had it disabled or switched off.
I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.
