Hardware :: D-link DFE-550TX NIC Card Not Recognized?
Apr 10, 2011I have RHEL 4u6 in P4 machine, but somehow network card (D-link DFE-550TX) is not working on it. BTW machine is dual boot, and the same card is working under Windows.
View 12 RepliesI have RHEL 4u6 in P4 machine, but somehow network card (D-link DFE-550TX) is not working on it. BTW machine is dual boot, and the same card is working under Windows.
View 12 RepliesI'm trying to install DFE-550TX , network device of D-LINK, with no success. I'm using CentOS 5.6.
View 1 Replies View RelatedI just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies View RelatedI have just built my self a new computer, since it will become a media center its not that powerful so i decided on using ubuntu instead of windows. Only one problem so far, my D-Link dwa-131 is not recognized and i can't connect to the internet except with a Ethernet cable. So how do i make my computer recognize the dwa-131?
View 1 Replies View RelatedI have two D-Link network cards installed in my computer. The Ubuntu 10.04a2 installer seemed to recognize only one of them, though I know both are functional. I plugged a CAT5 cable in here, connected to my home network (with Internet). The installer proceeded happily, configuring DHCP and synchronizing clocks. However, when I rebooted after its completion, Ubuntu didn't recognize that I was connected to the network. I re-jiggled the RJ-45 connector, to no avail. When I run "System Testing," it does list both network cards during the Network suite, one being D-Link, and the other "James Bond" or something. So, what gives?
View 2 Replies View RelatedHow can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies View RelatedI am trying to compile a software using a provided sdk. I suspect that the sdk has some mismatch of the platform library, but I am not sure.
The error I got is
Code:
The libidata.so.42 is there in that folder. I guess the file might be in a big endian. Is there a way to check if the libidata.so.42 i have might be a big endian format, rather than little endian?
If my guess is incorrect, This is a c++ code on fedora x86 machine.
why my sd card is not recognised (not mounted) when I insert it into the sd card slot...neither if it is already inserted at bootup nor if it is inserted afterwards? I am running Opensuse 11.2 (with KDE4), and I have no reason to suspect the hardware (yet), since it was OK recently with OS 11.1.
[code]....
I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?
View 14 Replies View RelatedI have a Mini-ITX VIA EPIA LT series motherboard running Slackware 13.1
Graphics card is not recognized properly.
But the graphics is OK the first half of the boot, then it turns weird and stays that way.
The screen is very dark, tux in the upperhand left corner is colored wrong. (Red, Purple, Green)
I did a Xorg -configure, and this is the content of xorg.conf.new:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
I just closed another issue about an unrecognized USB C-Media headset, because the issue seems to be deeper... On an Asus Eee 1001p running Fedora 13, I've run lspci | grep -c audio, which returns 0.
Running alsa-info.sh --no-upload I get a report that tells me that there are no soundcards... Pulseaudio is running though. Also, if I use VirtualBox the sound works fine there (including my USB headset).
I used to have sound, and I'm not sure how it disappeared. I really don't know where to start with this, it's been a pain in the ass all week.
How can I get Suse 11.4 to see my wireless adaptor? Would love to get this working so I don't have to upgrade my old XP OS to Win 7.
linux@linux:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:4101]
Kernel driver in use: i915 .....
my TV capture card wont even get recognizedit my Windows machine it works finebut here in Ubuntu 9.10 it does nothingit i an older WinTv 150 non-PVRit has the 878 chipset
View 4 Replies View RelatedI just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies View RelatedI've no idea what the heck is going on with my TV capture card, i went to the other posts about my Hauppauge Inc. HDPVR-1250 model 1196 but it all didn't work i have the ubuntu-restricted extras installed but mythtv is not picking up the card. i'm running ubuntu karmic.
View 9 Replies View RelatedSomeone had just given me a pc with no OS so I installed ubuntu 10.04. The pc has a wireless card but I cannot seem to get the OS to recognize it. My wired connect is fine but wireless is non-existent.
View 7 Replies View RelatedI'm trying to proselytize and have installed Lucid on my receptionist's Gateway M500 with an Orinoco PCI Mini wireless card.
The card works in XP, but when I boot into Linux, the network card indicator light doesn't turn on, and lspci gives me this:
No wireless card
Pressing the on-off wireless button does nothing.
What can I do to turn on the modem so that Lucid sees it?
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
I updated my video card drivers, but when I boot back up, I have no GUI and am given a terminal because it does not recognize the drivers. I have already changed "quiet splash" to "nomodeset" .
Specs:ATI Mobility Radeon 5650
500GB (7200RPM) Hard Drive (SATA)
Intel Core i5-450M processor 2.40GHz with Turbo Boost Technology up to 2.66 GHz
4gb of ram
Ubuntu 10.10
I have lucid installed on my hp laptop without any problems, and I went to install it on another hp but the I can't connect to any wireless network. I tried to follow this thread's advice [URL] . Because it's pretty much the same problem except I think the wireless card is from a different Intel family but it didn't work.
Basically wireless networks won't show up, in fact the network icon only has "wired" as a menu option.
I tried to follow the thread, even though I had no idea what it was saying as far as instruction goes.
The soundcard was working with the exception of the mic.
So I tried to install linuxant drivers and the installation failed for some reason.
So I uninstalled it. After that my sound card is not being recognized.
Here is the output of the alsa diagnostic script.
Code:
I have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
View 1 Replies View RelatedUbuntu 10.4 with wireless card TP-Link TL-WN321G the driver installed and it connect to the wireless network but no internet access. I checked everything about the wireless information and everything is fine nothing wrong and the ip address is fine, am new to ubuntu and I don't know how to uninstall or reinstall the driver so I bought another wireless adapter Xtech this one the ubuntu didn't recognize it and I have the cd it came with but the driver is like make file and configure and .a or .c I really want to use ubuntu but without an internet connection no use of it!
View 1 Replies View RelatedI have a WUA-2340 USB Adapter manufactured by D-Link. This is my first day using a Linux based cloud OS I need some drivers for my USB Wlan device.
View 4 Replies View RelatedI'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
Some information from my system :
Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0 Link encap:Ethernet HWaddr 14:58:d0:09:72:bd
inet adr:130.125.57.144 Bcast:130.125.57.255 Masque:255.255.255.0
adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0
[Code] ....
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
I've got a problem on my Debian, I've tried installing all the correct alsa packages and all packages that have the word sound or audio description. The problem that is happening here is that when I go into settings and click on sound in Gnome, it appears to have a dummy output and in fact, a few weeks ago, the sound was working properly. Now, I believe, that after an update, the sound card was not recognized. Used the lspci command in root mode, and showed my sound card which is onboard. I'll leave the model below it, because I've tried everything and could not solve anything.
Code: Select allroot@debian:/home/weiller# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
[code]....
I just installed 10.04 on my EeePC 1000HE, and wireless isn't working. My card isn't listed when I ifconfig. I've messed around with installing the Windows drivers, but nothing has worked so far.
If it's useful, I popped off my battery and it said something about the wireless controller "NE766".
make sound card recognized by alsa?
Code: !!Sound Servers on this system !!
----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
[Code]....
so I had to reinstall Ubuntu.But now my Wireless card won't work. It used to work before (plug and play), and I have no problem with it when I boot from the CD.I cannot use my cable connection because as soon as I plug my computer in, the network crashes, the router doesn't respond, gets hot and refuses to work until I unplug it and let it cool off for 2 minutes.I'm using Ubuntu 10.10, Desktop PC.
Code:
:~$ lsusb
Bus 001 Device 002: ID 0846:4260 Netgear, Inc. WG111v3 54 Mbps Wireless [realtek TRL818B]
[code]....
First, my set-up -Intel i5 quad-core CPU 16GB RAM.Two Radeon HD5450 video cards, each with two monitors.Multi-boot - Windows7, Ubuntu 10.04.2 and Ububtu 10.04.2(not a typo, the second instance is for experiments)Both the 10.04's have the proprietary ATI video drivers.
On the first set-up, everything works beautifully.All four monitors are alive, and configured with Xinerama as a single large desktop.In the second Ubuntu 10.04 set-up, I have two problems -The second video card is not recognized -it shows up as an unrecognized card.Of the two monitors connected to it, only one is detected, with a resolution of 640x480, not the 1920x1080 the first set-up sees.When I try and switch to the virtual terminal - ctl-alt-F1, I get a blank screen.The terminal is alive and well - I can log in, and enter commands which are executed. For example, when I enter 'ls -l > dir.txt', I see a 'dir.txt' file in my home folder; nothing shows on the screen.how I got the first set up to work!I have tried copying the xorg.conf from the first (working) set-up to the second, but still no joy.The Grub GFXMODE and GFXPAYLOAD are common to both the set-ups, so that can't be the difference.