Ubuntu Networking :: Wired Network Connection Lowers Link Speed Repeatedly
Apr 1, 2011
I believe I'm running Kubuntu 10.04, but don't quote me on that. Here's the version string from dmesg. Linux version 2.6.32-31-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #60-Ubuntu SMP Thu Mar 17 22:15:39 UTC 2011 (Ubuntu 2.6.32-31.60-generic 2.6.32.32+drm33.14 I have an emergent problem with my wired ethernet resetting the connection on a frequent basis. When it resets it re-negotiates the link speed and I often end up with a 10Mb/s link and on some occasions a 100Mb/s. The configured speed for the link is 1000Mb/s full duplex using a preup ethtool command. I do not use NetworkManager but have the interface configured in /etc/network/interfaces.
[code]....
View 3 Replies
ADVERTISEMENT
Nov 1, 2010
I did a clean install of 10.10 just under a week ago and something is really wrong with my wired connection. I keep loosing all connectivity and have to connect again from the panel app. After that, every thing works again for about 30 to 60 seconds and the the connection goes again. No lost connection notification pop up or anything like that, but i cannot browse the web or download upgrades while the connection is gone.
Then the really weird part. Sometimes my connection works just fine. On some boots everything is fine for a long time (hours?) but then the problem comes back. My network card is an Intel 82567LF-2 and it uses the e1000e kernel module. I dual boot to Windows Server 2008 R2 and there I have full connectivity all the time.
View 1 Replies
View Related
Apr 19, 2010
I recently setup my two PC's for network file sharing using Samba. I notice the max speed I can transfer a file is 89kb/s instead of 100Mb/s. How can I increase the speed to max 100Mb/s? Both systems are running Ubuntu 9.10 w/Samba.
View 7 Replies
View Related
Nov 19, 2010
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies
View Related
Nov 12, 2010
how to view my network connection speed. EG: 10/100/100 mbit. I searched and searched with no luck, I tried ethtool as well as mii-tool.
View 4 Replies
View Related
Sep 14, 2010
Since this morning I cannot get any network connection working from regular boot up. I'm beyond frustrated.I booted into windows xp for the first time in at least a year today and connected fine.I booted into recovery mode -> then failsafe graphics mode , two times and had internet one of the times.I'm writing this from live cd.I have a feeling it is something super simple to fix but ...Here is my ifconfig -a from regular(not working network boot)
Code:
ry@ry-desktop:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:24:1d:71:13:55
[code]...
View 5 Replies
View Related
Oct 11, 2010
I am unable to get my wired network connection to work. My laptop sees the wired connection, but will not connect. I am running 10.04 on aLenovo T400 with 3 gb of ram.
View 7 Replies
View Related
Nov 1, 2010
I had some problems installing 10.04, which I'm not going into here unless I have to, but it appears to be up and running now except my PC can't access the network, even though it's wired. This is the first time I've tried putting on a new build by myself as my son always used to do it (my PC used to belong to him many years ago, and is old, like me.)
View 1 Replies
View Related
Mar 28, 2011
Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.
On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.
View 8 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
Aug 5, 2010
How to verify that Debian is running at 100 Mbps or 1000 Mbps? I can view the report from 'ifconfig eth0' but I can't see how fast the link has been established.
View 2 Replies
View Related
Feb 25, 2010
I'm trying to set up a wireless or wired network (wireless would be better...) to share my connection with my housemate, as well as with some devices. The only guide I found regarding this (I must admit, I didn't have much time to put into research), was dating back to 2005, and although doable, seemed somewhat confusing. Getting to the point: is there a way (maybe a standalone program, or some kind of plugin) to share a connection?
View 9 Replies
View Related
Feb 17, 2009
I've installed F10 on my laptop since few days and I'm facing an annoying networking issue: the network connection seems to work well when, suddently, it goes down for a while, and then come back.This happens with both wired and wireless (Intel PRO/ Wireless 3945ABG) connection.
View 6 Replies
View Related
Feb 3, 2009
I have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
View 1 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
Jan 19, 2009
I have a Mandriva linux box connected by cable to my router. When I stream audio using this box it crashes all the wireless computers on my network. There is no effect on wired computers. All but the one computer are windows (xp or vista). The affected wireless computers are not able to even find my wireless network. I have to reboot the router to get them online.
View 1 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Apr 9, 2010
I installed Ubuntu on an old desktop last night and am having some problems with my wireless connection.I've searched around a bit and tried a few solutions but nothing seems to be working so hopefully someone can help. I'm using a Netgear WG111v3 wireless USB adapter and am attempting to connect to a Sky Broadband modem, the connection shows up in the list of avaliable networks after clicking on the network symbol and after attempting to connect for a while it then asks for the WPA password.
I enter the password and then this repeats over and over again continuously asking for the password and me continuously entering it. I know the password is correct as I'm using it on my laptop and other home computer right now.I've tried connecting to a hidden wireless network and inserting the network name and password as some have suggested and I've also tried adding the details from my router into the connection; so that I have manually entered the information rather than automatically finding it, this also hasn't worked.I should probably add that earlier today I seemingly randomly got connected and then managed to run some updates but since then it has disconnected and the same problem is repeating over and over. Sorry if thats quite a long explanation but I thought I'd try and make it as clear as possible,
View 1 Replies
View Related
Oct 20, 2010
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies
View Related
Feb 11, 2010
I just installed ubuntu 8.10 on my pc. Before was XP installed. I formatted the system and installed ubuntu. Installation was successful. Problem is that I cant connect to network. My network card: realtek 8139 ethernet card
On ifconfig I get:
Code:
eth0 Link encap:Ethernet HWaddr 00:16:76:af:23:b3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:23 Base address:0xb800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:502 errors:0 dropped:0 overruns:0 frame:0
TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31896 (31.8 KB) TX bytes:31896 (31.8 KB)
Also the connection is wired one with modem only it's reliance broadband. The wire is connected between modem and pc but there is no blinking of light for this connection. The wan is active and wan's light is blinking and when I was on xp on same pc there was no such problem.
View 4 Replies
View Related
Apr 30, 2011
I power on my computer, it is no wired network connections.
I tried command ifconfig and lshw -c network . it could find the network card eth0.
Quote:
Quote:
View 3 Replies
View Related
Jul 11, 2011
I have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
View 1 Replies
View Related
Jun 7, 2011
as per pytheas22, i'm attaching few details here. my download speed would starts at 470 kB/s and gradually decreases until it reaches 116 kB/s. Loading web pages seems to be fine.
[Code]...
View 5 Replies
View Related
Jul 14, 2011
I've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
sudo lshw -C network
Code:
*-network
description: Ethernet interface
product: 3c905C-TX/TX-M [Tornado]
vendor: 3Com Corporation
[code]...
View 9 Replies
View Related
Nov 3, 2015
As a random thought I purged the firmware-realtek package and rebooted. Ethernet works fine now??
Fresh Jessie installed this morning with KDE. Wired worked fine during installation and initial boot. Reboot after package installation and only wireless is working right now. I did install the realtek firmware as part of my normal package list.
This is /var/log/syslog when it stopped working, and hasn't reconnected since. Cable is fine as it was working perfectly with a live Ubuntu shortly before I installed the system with Debian.
Code: Select alllspci | grep Ethernet
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
Code: Select alldmesg | grep eth0
[ 0.882603] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90000c7e000, e0:db:55:b8:d6:a0, XID 1c800880 IRQ 56
[ 0.882605] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.958631] r8169 0000:03:00.1 eth0: link down
[ 2.958658] r8169 0000:03:00.1 eth0: link down
[ 2.958686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Code] ....
View 2 Replies
View Related
Dec 26, 2009
Opensuse 11.2 - wired internet connection
I keep losing internet connectivity from within OpenSuse. I've had ubuntu/kubuntu beforeand never had a problem. I installed opensuse and now after a few minutes of browsing I'll lose my internet connection.I also dual boot into winXP without any problems.I noticed that when the connection is lost I can't even reach my router - which is where I'm getting the wired connection from.So it's not just the outside internet but the local network too. It only happens within opensuse.
View 9 Replies
View Related
Apr 30, 2010
using Hardy Heron on a old Thinkpad T41.This is a fresh install system and I noticed it kept dropping wireless connection. After google around, seems like this is a common problem? Then I switched to wired network, and turned out the same thing happens again. Looks like doesn't matter wired or wireless, it kept dropping itself from time to time.
fter checking syslog, I found something interesting...it kept complain eth0 is invalid, then it said it found a better connection?I found that extremely weird..
Code:
Apr 30 06:24:32 support kernel: [ 961.236895] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[code]...
View 1 Replies
View Related
Mar 11, 2011
I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.
View 9 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Jan 22, 2010
I have two PCs one has Windows XP the other has Ubuntu 9.10 on it, the Windows PC has no problems getting on the Internet (I'm posting this with it) and getting an IP address from the wired router. The wired router I have is ONLY wired it does not have wireless at all, it is currently setup to hand out IP addresses between 192.168.1.2 and 192.168.1.254.
The Ubunutu 9.10 PC worked great last night surfed all over the place for hours, then finally shut it down last night when I went to bed, shut down appeared to be normal like it always does when it shuts down, then this morning when I booted it up it gave error: "WIRED NETWORK - disconnected you are now offline".
View 5 Replies
View Related
