CentOS 5 Networking :: Can't Install Network Printers?
Nov 3, 2010I can't install printers shared by a computer running Windows 7, I try to add a new printer using samba, it shows me the other computers but I cant see any printers.
View 4 Replies
ADVERTISEMENT
Ubuntu :: Autodetection Of Network Printers Makes All Printers Disappear?
Jan 28, 2010I've been using Kubuntu 9.10 for several months now. For most of that time, I configured and used with no problem several network printers.. a HP LaserJet 3015 at home connected to a Windows machine, and a Xerox Phaser 8560 at my coworking space connected directly to a router.
However, several weeks ago I was at the coworking space, requested a print from my web browser, and in the printer selection dialog, observed the list of printers expanding... some sort of autodetection of network printers was occuring, and multiple instances of the same printer were being offered, with slightly different names. Printing to these devices did not work.
Now, after a reboot, there are NO network printers available no matter what network I'm connected to. When I use the Kubuntu printer configuration tool and try to set up a new printer, it asks me to "Select a connection" to which the only option it gives me is "Other". When I put in an address for the printer it just cycles endlessly, never finding anything.
Fedora Installation :: Cannot Install The Network Printers
Jul 12, 2011I run a laptop behind a server. Because I could not find the printer I disabled the firewall and now I can detect the printer, but when I want to select the printer the program hangs.
View 5 Replies View RelatedUbuntu Networking :: Kubuntu Can't Set Up Any Network Printers
Feb 15, 2010I've had Kubuntu 9.10 32-bit running on my laptop since it came out, but in the past month all its networked printers have disappeared from the configuration, and I can't set up any more. I've been through the forums again and again and cannot fix it. I've installed and reinstalled lots of packages related to CUPS but it doesn't seem to make a difference.I'm not sure what has happened, but I have lots of clues. Since I'm reaching the limit of my know-how here, I'll just list all the clues.
I'm pretty sure the problem is in my Kubuntu laptop, because in my SOHO setup I also have a Kubuntu 9.10 desktop (this time 64 bit) connected to a printer, and I have successfully printed through that from both a Windows XP laptop and a Xubuntu 9.10 box.On the Xubuntu 9.10 box, I just asked for the GUI print configurator and it automatically detected the network printer. No muss no fuss.But on the Kubuntu laptop, when I go into the print configurator, here's what happens:
- it shows two options, "new printer" and "server settings" (image a.png)
- entering "server settings" everything is greyed out and unchangeable (image b.png)
- entering "new printer" shows only one option for a connection, "other" (image c.png)
- after entering the address of a printer i know works (image d.png) the configurator has detected the printer (image e.png)
- but then attempting to move forward it crashes with no explanation.
Running the non-kubuntu version of the configurator GUI provides a bit more information before it fails. When I try to access the desktop with the printer attached it wants a username and password. (which wasn't necessary for the two client machines who successfully printed.) And at the end of the process there is an error: "there was an error during the CUPS operation: client-error-forbidden".
Two more clues:
- when I try to go with my browser to localhost:631 the browser can't establish a connection
- but I can see the cups page on the printer's host machine at 192.168.0.104:631 no problem.
Ubuntu Networking :: Any Ink Level App For Network Printers?
Jul 28, 2010Is there an ink level app that works with network printers? I am currently using Ubuntu Lucid x64 with a Canon MX860 printer that was installed using this tutorial: [URL]. Everything seems to work fine (it prints) but I cannot get any of the ink level apps to work (Mtink or Inkblot). After doing some research, my conclusion is those apps only work with USB connected printers. Is that true?
View 3 Replies View RelatedUbuntu Networking :: Adding Network Printers To Server 9.10?
Mar 1, 2010I have Ubuntu Server 9.10 up and running as my file server. However, it sits amongst other PCs running XP Pro and Network Printers (e.g. Xerox Docuprint C2535A) on the network. My question is whether there is a way of adding the Xerox printer to the Ubuntu Server so that other PCs will send print jobs through the server. I think the printer is windows-based printer. Is it possible to do this? or are there any other options that you may be able to share with me?
View 3 Replies View RelatedUbuntu Networking :: Astrofly Setting Up Network Printers?
Apr 15, 2010I need help setting up network printers I have two computers, they both have ubuntu on them. The internet comes in to the first computer on a usb modem, it is routed out from ethernet to wireless. I used CUPS on computer two and printed out a test page that worked, but it won't print out anything else.
View 1 Replies View RelatedUbuntu Networking :: Discovering Network Printers And Configuring Routes
Apr 6, 20101. My machine [running Karmic Koala] is part of a corporate LAN with NIC details below
Quote:
2. My routing table:
Quote:
3. The network printer's details [as read from the printer's display interface]:
Quote:
My question:
This printer can be discovered by windoze machines using "Find printers" and then added. [Am not sure how this works!]
But when I try to discover the same from my ubuntu machine, its not getting discovered. Tried pinging the ip [172.20.254.158] which gives the following:
Quote:
Now I tried fiddling around with the route command along with good amount of googling but to no avail.
1. Is there a way I could add that printer to my machine?
2. If yes, how could I? Does it involve adding routes?
Debian :: Installing Network Printer - Able To Print To One Of The Network Printers From My Desktop
May 10, 2010Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies View RelatedCentOS 5 Networking :: After Install Cant Surf The Net - No Devices For Network
Sep 12, 2010I installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedCentOS 5 Networking :: Network Install / Static Changes To Dhcp In Anaconda
May 10, 2010I'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
View 1 Replies View RelatedCentOS 5 Networking :: Install DFE-550TX , Network Device Of D-LINK?
May 5, 2011I'm trying to install DFE-550TX , network device of D-LINK, with no success. I'm using CentOS 5.6.
View 1 Replies View RelatedCentOS 5 Networking :: Does Network Install Assign Pingable Ip During Installation
Jul 23, 2011Does a network install assign a pingable ip during installation? I am trying to verify why I get an error during installation that "stage2.img" cannot be found and I'm guessing that since I can *not* ping the static IP I assigned, that the network functionality is not working during the install process. Can anyone confirm if I should be able to ping a system during installation using the assigned static IP?
View 1 Replies View RelatedUbuntu :: Printers Do Not Save In 'Shared Printers' Group?
Oct 9, 2010I have a shared printer on my Ubuntu 10.04 machine, and it cannot be seen by other computers (macbook, pc) on the network. I have the printer shared, but it is not a member of the 'Shared Printers' group. When I add it to the 'Shared Printers' group, it stays there until I close the 'Printing' application GUI. Then, when I re-open 'Printing,' it is no longer in that group. I think this is why I can't see it on the network, due to the wording of the option in Server Settings to 'Publish shared printers connected to this system.'
View 3 Replies View RelatedFedora :: Printing From The Network Printers?
Sep 1, 2011I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies View RelatedCentOS 5 Server :: 5.5 Is Not Supporting My Printers
Oct 13, 2010I have CentOS 5.5. server on 2 raid 1 drives .The system is a quad core Intel CPU with 2GB RAM.Printers:-
HP p1006 laserjet
HP multifunction 5600
Canon prixma ip3000
Canon prixma ip4500
I cannot get any of these printers to work on this server.
Debian Configuration :: Network Printers Are Lost Every Now And Then
Oct 3, 2015Debian Testing, updated daily, running Gnome.
A week ago, a new router was installed at the office and now my system "loses" the networks printers and forces me to manually select them within Cups various times a day to be able to print. The issue was not present when the old router was in place, and all my colleagues can print without problems using their Windows machines.
This only affects printing, for Simple Scan can always communicate with the printers without problems.
The printers are two basic Epson L355 (those with ink tanks) and the "official" driver (from Open Printing) has been working perfectly since I installed Debian. The whole Cups and Avahi stack is installed, and I even added system-config-printer this week to make sure that I was not missing a package.
Because the only variable that changed is the router, there has to be something there messing with my Cups or Avahi configuration.
Note that the new router had a "vanilla" installation, where no advanced settings were touched. All connected devices (computers, mobile phones, printers, etc.) are given new IP address through DHCP every day.
Where should I start? I have already deleted and added the printers within Cups several times during the week, and the problem persists. Is the router renewing the address more often than the old one did? Can this "refresh" be delayed? Should Avahi monitor devices more often?
I guess that I could configure the router and give static IP addresses to the printers, but such a setting was not present in the old router and my computer could locate the printers without problems.
Hardware :: Network Printing 1 Ubuntu 10.04 And One Os X, 2 Printers?
Sep 18, 2010I'm a newbie on lucid lynx 10.04
The Hardware:
Mac Mini late 2009 running 10.6.4 (Snow Leopard/OS X)
Dell Dimension 2400 running Ubuntu 10.04 Lucid Lynx
HP Photosmart C4680 multifunction printer/scanner/copier
Canon PIXMA MX310 multifunction printer/scanner/copier/fax
Netgear Wireles-N 150 router model WNR 1000v2
[Code]...
As the HP Photosmart printer is currently connected, it is visible over the network by the macintosh however will not print (all jobs appear in the macintosh's queue without a "hold" designation, printer not on pause. pause/resume only changes the tag on the printer but does nothing to cause the queue to begin printing). Although I can navigate within the printer setup to the existing printer on the network, I cannot connect the printer on the mac without finding a new "printer" instance on the Ubuntu machine when I get there. The printer instance which works is the one the Ubuntu machine created, and the printer instance which does not work is the one generated by the mac, which doesn't work either from the mac or when printed to from the Ubuntu machine, now that this instance exists there.
With the printer connected to the mac, it is visible over the network to the ubuntu box however asks for authentication for the print queue and will not accept any password established for either machine. It also does not specify what account name the password should match with so is an utter quandary.
lastly, I did run dmesg but the result was too large for my terminal's log and scrolling back through it I did not find a section relevant to the HP (or Canon) printer to post here.
General :: Make Discovery Of Printers Available In Network?
May 31, 2011I got a task to discover printers available in my network using cups.
View 10 Replies View RelatedDebian Configuration :: Browsing For Samba Network Printers In KDE?
Mar 12, 2011I noticed that KDE does not have a way to browse for network printers like Gnome does. I installed system-config-printer to fix this(if there is a KDE route that would be nice as well). Anyway, I go to add a printer and select "Network Printer" and click "Windows Printer via SAMBA". This is where i would typically press "Browse..." but it is unclickable. This leads me to believe that I am missing a package. Essentially my question is: What are the necessary packages to access Windows printers via SAMBA with system-config-printer?
View 3 Replies View RelatedDebian Hardware :: Unable To Set Up CUPS / HPLIP And Network Printers
Jan 12, 2012I'm having a devil of a time trying to set up printing with 3 network printers: an HP Laserjet P4014n, an HP Laserjet 5200tn, and an HP Officejet Pro 8500 a909a. The three printers are connected directly to the office intranet and have their own ip addresses. The system I'm trying to configure is running Wheezy, and HPLIP and Cups are both installed. I have confirmed (from [URL] ....) that all printers are supported.
First, running "hp-setup -i" (hplip-gui is not installed -- I do not wish to pull in half of KDE simply to configure printing), the program only finds the 2 laserjets. Adding one of them creates a printer in CUPS with an "hp:/net/<printer name>" connection. Attempting to printing a test page through CUPS fails with message "/usr/lib/cups/backend/hp failed".
Interestingly enough, running "hp-probe -bnet" finds all three printers. However, running "hp-makeuri" with each printer's ip address fails with "error: Device not found". Hmmm, so HPLIP can apparently go from seeing everything to seeing nothing. Very useful.
Moving to the CUPs browser interface, clicking "Find New Printers" under the "Administration" tab also only shows the 2 laserjets, although each is listed three times(!). The only difference that I can see among the three versions of each printer is in the connection uri:
dnssd://<printer name>._printer._tcp.local/
dnssd://<printer name>._pdl-datastream._tcp.local/
dnssd://<printer name>._ipp._tcp.local/
Adding any one of them seems to work, although I do not understand why there are three of them (presumably different protocols, though what they are and the differences between them are, I don't know).
Logging into the officejet control panel and browsing at its network configuration, I see mDNS, SNMP, and WINS are disabled, although SLP is enabled. Looking in '/etc/cups/cupsd.conf', I see 'BrowseLocalProtocols' is set to only CUPS and DNSSD, so I add SLP and restart CUPS. No change; the officejet still doesn't show. I go back into the officejet control panel and enable mDNS (which, if I understand correctly, is essentially the same as DNSSD). Nothing; the officejet still doesn't show.
General :: Accessing Windows Network Printers From A VirtualBox WindowsXP Client
Jun 6, 2011Is it possible to access windows network printers from a VirtualBox WindowsXP client running under Ubuntu 10.10 host? The networking type is NAT. Would Bridged Networking solve the problem? If so, is there a tutorial on how to set up bridged networking for virutual box?
View 1 Replies View RelatedOpenSUSE Network :: Setting Up 11.3 To Access Printers On Windows Server 2003 Via Samba?
Sep 7, 2010I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies View RelatedCentOS 5 Networking :: Configure Server1 To Have A Different Hostname On The Standard Network Than On The Virtual Network?
Oct 5, 2010I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
CentOS 5 Networking :: Setup A Network To Network VPN Tunnel Between Our Main Office And A Temporary Location?
Aug 12, 2009I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.
Network A (Main Office) (OpenBSD using isakmpd)
Network: 172.16.8.0/24
External IP: 1.1.1.1 (obviously not the real IP)[code].....
Ubuntu :: Install A Gui To Manage Printers?
Nov 9, 2010I installed ubuntu 10.04 minimial (just base packages), I have a desktop manager installed and was just wondering what the command was to install a gui to manage printers?
View 3 Replies View RelatedCentOS 5 Networking :: CentOS 5.3 And Atheros AR928x - Wireless Network?
May 12, 2009I have installed CentOS 5.3, and updated with yum update. I have kernel 2.6.18-128.1.10.el5xen.
I can't get my wirelss network to work, I have AR928X wireles network adapter.
Do I need to install a newer kernel and install ath9k or can I just downlad a driver without updating the kernel?
I'm new to CetOS and Linux so I hope someone kan give me a step by step guide to what I can do!
CentOS 5 Networking :: CentOS Does Not Acknowlege Hawking RT-73 USB Network Card?
Aug 25, 2010I just upgraded from Ubuntu 9.04 64-bit, to CentOS 5.5 64-bit and my RT-73 USB network card doesn't seem to want to function. It always worked fine in Ubuntu by default (plug and play). Is there some setting I need to make to get this working?Even BT-3 (which is quite old) recognizes the RT-73.
View 19 Replies View RelatedNetworking :: Sharing Files And Printers On LAN
Sep 16, 2010I have a LAN made up of three dedicated Windows computers and a Windows VM running on my Linux box. All the Windows systems share files and printers and I want my Linux box to be able to do so also.
View 11 Replies View RelatedOpenSUSE Install :: Parallel Printers Support Under 11.4?
Mar 10, 2011Are still the parallel printers suported under OPenSUSE 11.4 ????
View 1 Replies View Related