My TRENDnet TEW 424UB Wireless Adapter does not show up in the network window. The light does work while using Ubuntu but it goes on during Windows. How do I fix this?
View 6 RepliesI bought a USB adapter for my wireless connection at home. But there is no drivers for the adapters in ubuntu, there is only windows executable files. I am using ubuntu 10.04. I spend around 40$ for the adapter. Some one please help me how to work this out. Its NP910n netcomm adapter. I am using ubuntu10.04.
View 1 Replies View RelatedAs the title reads. My wireless adapter does not work when I boot from the Ubuntu 10.04 LiveCD. The adapter in question... tricky. It's this one: [URL]...- however, aside from a mention in one of the comments to a "Ralink RT2780", I don't see any reference to a make/model.
The software that ships with this product is indeed Ralink-branded, but again there's no mention of a specific make/model. So I assume it's just a driver issue, however I've no idea where to begin in my search for one as I can't identify its model number.
I have been searching for days on end trying to get my machine to detect my Netgear WG111T wireless adapter...and I've gotten absolutely nowhere at all.Most tutorials suggest I use ndigstk(sp?), which allows me to use Windows drivers for my adapter. I've been told many times to use the wg111t.inf file, but all I've been able to come up with is the w11t.inf file. Whenever I start up the Windows Wireless Drivers application, I usually get a popup which tells me "Unable to see if Hardware is detected"--yet when I hit the OK prompt, next to the w11t.inf file, it says "Hardware detected --Yes", yet I still have gotten nowhere. I grasp some basics of Linux, but overall I'm still pretty new to it--and I have a big headache from the whole thing.
EDIT: I forgot to mention, my install is 9.04, so if 9.10 resolves this, how would I go about upgrading without downloading an ENTIRELY new disc (I have a horrid internet connection, it'd take HOURS to download the 699MB ISO, so perhaps make that a last resort)
I'm using ubuntu 10.04 (all latest updates are installed) and when I plug my 300N Wireless USB Adapter WL-344 in my computer, Ubuntu does nothing: the light of the stick doesn't burn and ubuntu doesn't see the usb.
View 1 Replies View RelatedI upgraded to Ubuntu 10.4 on my Dell Inspiron 6400 yesterday (32-bit). Everything was running great, but when I turned it on today my wireless adapter is no longer working and the hardware switch doesn't do anything. It's working in Windows fine so it can't be the hardware.Here is some information:
Adapater name: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Code:
iwconfig:
wlan0 IEEE 802.11abg ESSID:off/any[code]....
Restarting the network with 'sudo /etc/init.d/networking restart' didn't work.I've tried Ubuntu several times before but usually there is one small issue which makes me go back to Windows. I love 10.4 so I hope I can get this working so I can stay on Ubuntu!
I have just installed Ubuntu 10.10. It is great and all but I am not able to get my wireless adapter working...it is a cheapo one and I have found different tutorials around the internet trying to get it to work...to no avail!
View 1 Replies View RelatedI upgraded to Maverick Meerkat on my Compaq Presario CQ60 and the installation bugged killing all the documents and settings. I'm not a total n00by to Linux as I've been using it for years, but neither am I an advanced user.
Any halp you can give with this as I've tried everything I can think of to get the wireless card to work. Which basically boils down to trawling Google for the drivers and attempting to install them. code...
I have just installed Ubuntu 9.10 alongside Windows 7 and it is not picking up my Belkin N wireless adapter?? So I went to go and download the Windows Wireless Drivers (ndiswrapper) software so I can install my adapter and the download center just says "Not available in the current data" and wont let me download it? Also I tried to download my nVidia drivers from software center and it said the same thing?
Never before have I had a problem with Ubuntu until now So can anyone point me in any directions as to how to get these installed???
I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
View 5 Replies View RelatedI tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I updated Ubuntu to 10.04 after which I noticed the wireless indicator lights on my HP laptop were continually flashing between blue and orange and network performance seemed slow. I did some searching and found and implemented the following change to stop the flashing:
gksudo gedit /etc/modprobe.d/wlan.conf
Copy and paste the below line:
options iwlcore led_mode=1
Since making this change the wireless connection is shut off and I can;t get it to work at all. I first tried simply to remove the change to get back wher I was, but I can;t do that. Can sopmebopdy toell me at least how to get rid of this wlan,conf file ( it was created by the above command) so I can start over?
Coincidentally since making this change my Windows Vista OS fails to start because of errors attributed to a software or hardware change, of which there were none other than the Ubuntu wlan.conf change. . It may be unrelated but I am suspicious of the coincidence. I am running Vista and Ubuntu in a dual boot configuration and all ha run very well until I did the Ubuntu wlan.conf change.
I am now attempting a complete recovery of my Vista system, since it seems irreparably broken. Again coincidence or not?
I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).
I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.
I am running the newest Ubuntu and can not get my wireless adapter working. I ran
[Code]...
I upgraded from 9.10 to 10.04 and my wireless card no longer works.
The card is a Dell 1450 USB a/b/g card.
lsusb sees the card. device id is 413c:8104
dmesg says that p54usb is trying to load firmware isl3887usb but that failed (error -2)
I looked in /lib/firmware and didn't find that file
ps. god why did i upgrade?
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
[Code]....
I buy a new usb network adapter (Through DX), when I try to use it in ubuntu or BackTrack4 Final it is working, and connecting networks even with WPA encryption. But after few minuts it stops working totally. It is showing that I'm connected to the AP but web sites do not respond.
Notes:
- I have another PCI Wireless adapter which works fine.
- The problematic adapter works great on windows.
- A driver CD came with it, including a linux driver which I wasn't succesfully installed.
- A BackTrack3 Disc came with it, claming by the instructions that the adapter will work with it. I didn't try it because i have backtrack 4 final.
It took me dozens of surfing the web hours, and too many restarts,
This is my startup routine:
I log on and Network Manager shows no wireless adapter.
I go to System > Administration > Network:
There are two entries in the Devices tab: Wireless and Ethernet
As soon as I double click the Wireless device and the configuration pops up, the device starts working (no changes to the settings are made)
I have the following set to ON:
- Controlled by Network Manager
- Activate device when computer starts
- Allow all users to enable and disable this device
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
So I bought a linksys wireless-g usb adapter for my desktop because I don't want an ethernet cable running halfway around my house to the router (the router can't move from that location).
it comes with a windows setup disc which i obviously can't use in linux so i just plugged it in and hoped for the best. It seems to turn on, the little light flashes, and I tried connecting to my wireless network in the network manager (using 10.04, gnome), but it just seems to be retrying to connect and every 5 minutes it asks me for the password which I've given it already.
Yesterday I installed many updates on my compaq presario cq60-214dx running ubuntu 11.04.
This morning my 2 year old son was pressing buttons, generally playing with the notebook. When he was done the wireless stopped working. I cannot get it to come back on. What could he have possibly done without entering the password.
I have restarted several times. ifconfig does not show the wireless adapter. iwconfig says its not active. i turned on txpower using iwconfig but still nothing.
Recently I purchased a Linksys WUSB54GCV3 Wireless adapter. I wanted to use this on my xubuntu 9.04 version and kernel version is 2.6.28-14-generic.system. But unfortunately this doesn't support.
View 9 Replies View RelatedI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
Wireless not working on opensuse11.0 brother gave me dvd with 11.0 can't get wireless working
View 3 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
Running HH on a little Toshiba Satellite something-or-other laptop (I want to say A25, but who knows), Verizon FIOS router (wired and wireless).
NetGear WG511v2 adapter is so close to working...
Didn't seem to want to work with ndisgtk, so I ran ndiswrapper from terminal, using driver folder I copied from my Win2K partition.
(Had to do a cp WG511v2.sys WG511v2XP.sys, as the .inf file referred to the latter, but such did not exist; cp seemed to do the trick.) And now, survey says:
Code:
Code:
Code:
In "Network Settings", the card detects a few wireless networks (including my own in-home router). Status LED flashes constantly (which I interpret to be hunting), and every several seconds, it goes solid while activity LED flashes a few times (which I interpret to be finding a network, attempting communication), then activity LED ceases to flash and status LED goes back to flashing (which I interpret to be failing and going around again). Using DHCP, just like the other computers that connect without incident.
I have entered my WEP every way I can think of. The dialog lets me choose WEP ASCII or WEP hexadecimal; I have entered the key in all caps and in lowercase, as ASCII and as hex, have entered 0's and O's where applicable. No combination seems to allow it to actually communicate with my router beyond getting rejected. My other laptop and PC (and this laptop, when running Win2K) all connect just fine; none of them use WPA-type passphrases, so I assume that's unnecessary from Ubuntu. Roaming mode gives the same results as described above.
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies View RelatedAnyone knows what is the right driver for this device? It is not being recognized by the system, and there is no Atheros AR9271 on url
View 9 Replies View Related