My wireless download rate is absurdly low (0.3 mbps) compared to a faster upload rate (1.5 mbps). My girlfriend's laptop running windows gets much higher download rate (20+ mbps).
View 8 Replies
The Realtek RTL8111 wireless does not work in Mint 10 or Ubuntu 10.10. Works perfectly in Mint 9 and Ubuntu 10.04. No proprietary driver necessary. Has anyone managed to get it working in Ubuntu 10.10? : You can click the one you want to connect to and enter your security key. I just use WEP because it's easy. I enter the key and the system just tries to connect until it times out. You can repeat this process indefinitely. Wired works fine but after any available updates are installed, still no wireless capability.
View 3 Replies View RelatedI had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
Desktop PC with Trendnet TEW-642 PCI wireless N adapter (Ralink 2860 STA driver). Running openSUSE 11.3 X8_64 with KDE 4.4.4. Software Management and KNetwork Manager both identified rt2860STA as installed. However, KNetwork Manager's authentication window keeps popping up every few seconds and I cannot get wireless.
1) uname -r:
Code:
2.6.34-12-desktop
2) /sbin/lspci -nnk:
Code:
03:06.0 Network controller [0280]: RaLink RT2800 802.11n PCI [1814:0601]
Subsystem: RaLink Device [1814:2860]
Kernel driver in use: rt2860
3) dmesg:
Code:
[ 6.270671] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.275290] alloc irq_desc for 21 on node 0
[ 6.275294] alloc kstat_irqs on node 0
[code].....
I have downloaded and extracted the latest rt2860.bin file from the Ralinktech website to Desktop but even as root I cannot copy it to /lib/firmware or replace the existing rt2860.bin file in /lib/firmware.
Just built a new computer and I think I somehow need to activate my wireless card to get it working.The hardware seems to show up. I get "Wireless Networks" in my network manager but it is grayed out and says disconnected. I think it is an easy fix I just cannot find it.
[Code]...
After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.
After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?
I've been having problems trying to connect to my home network with my onboard NIC. No solution given on the forum has helped me so far.. I just can't seem to connect to the network and I have no idea how to fix it. My NIC is recognized (lsmod shows r8168 is loaded) but when I choose 'auto ethernet' nothing happens .I hope there is someone that can help me because It's a pain to not have internet access...
View 2 Replies View RelatedEven with both machines in the same room, I'm only getting 1Mbps when using a pair of TL-WN321G wireless USB adapters to link my main box and my laptop. I'm using Fedora 11 on both machines. It is just as bad if I use the laptop's built-in wireless. lsusb shows the adapter uses the Ralink RT2501USB chipset. iwlist wlan0 rate gives "wlan0 unknown bit-rate information."
View 1 Replies View RelatedMy wireless on my Ubuntu desktop is really slow compared to my windows laptop. Its not a flash problem or a browser specific problem.
I have searched the forums but can't find much.
I did disable ipv6 (it now shows up as being 'ignored' in network Manager which is correct, right?) but that hasn't helped.
It doesn't make a difference whether I use DHCP for everything or just for address only with the Google DNS addresses.
After entering 'lspci' my card shows up as
Code:
Because of a problem with system freezes I have updated to the 2.6.33-020633rc7 kernal but this hasn't had any impact one way or another on wireless speeds.
My router is a Belkin WRT300n.
I have an MSI Megabook M662. Can't get my wireless working. I have "enabled" checked, but can't view any connections. I don't have wireless at home, I'm trying to make this work for free connections at the library, etc. From the Help Menu troubleshooting I tried:
mag@MSIubuntu:~$ sudo lshw -C network
[sudo] password for mag:
*-network
description: Ethernet interface
[code]...
This reports Disabled, and the advice is to check that device is on. But I just want to roam for service, I don't have my own wireless at home. I thought I might need to use ndiswrapper but I cannot locate a driver for this card info:
lspci -nn 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
What should I try now?
I have an Asus P6T7 WS motherboard with 2 embedded NIC's.Relevant output from lspci:
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
uname -a:
[code].....
I am running a mail server and my POP3 clients have started complaining of slow speeds, about 10 days back. This prompted me to take remedial action on many fronts, finally I decided to look at the link itself.Attempts to force the NIC into full duplex mode using ethtool have failed. The command runs and throws me back to the prompt, but the NIC remains in half duplex mode.
Command that I have tried: ethtool -s eth1 speed 100 duplex full autoneg on modprobe -l r816*:
/lib/modules/2.6.18-164.el5PAE/kernel/drivers/net/r8169.ko
I went out and purchased a Sabrent PCI wireless 802.11n card with the RT2860 chipset because it was on the ubunutu compatibility list and has linux driver available from the manufacturer. I was impressed that the card worked in wireless G mode out of the box, which is a great start....
However, I can't find any wireless N networks. Dual booting I can find/use my N network, but in ubuntu I can only find my G network. This is somewhat frustrating because I bought this card and a new (read: expensive) Linksys E3000 router specifically to run a nice new N network...
I have downloaded, made, and installed (reboot) the latest driver from the manufacturer, but it still won't find any N networks. I found a few posts by searching here and google that alluded to changing this line: "HT_OpMode=1" (from 0 to 1) in the config file RT2860STA.dat located in /etc/Wireless/RT2860STA/ and a reboot. It didn't work for me.
Frankly all this rebooting is starting to **** me off ... I have spent most of last night trying to setup my 180$ wireless network and its still no better than the freebie DDWRT54g based wifi it replaced. I am frustrated, perhaps someone wiser in the ways of ubuntu and wireless N can shed some light on the situation....
I forgot to mention I am on Karmic Kola, amd64 with the standard gnome.
I'm running 11.04. I have brought a new WiFi adapter, ralink rt2070. When I browse the internet, it takes a long time to load a webpage. When I download updates, it goes at 3,060 BYTES a second. Is there any solution? I'm using the default rt2800usb driver.
View 9 Replies View RelatedI've been happily using this lappie with LTS but wanted to try out 11.04. It looks great but wireless has been an issue:
1. No wireless during install
2. Had to manually blacklist the rt2860pci etc modules
3. Wireless still not resuming after suspend
05:00.0 Network controller: Ralink corp. RT2860
Subsystem: Ralink corp. Device 2790
Physical Slot: 0-2
Flags: bus master, fast devsel, latency 0, IRQ 18
[code]...
The latter manual mod improved things slightly but still no cigar
I'm experiencing very slow network speeds in one direction (out) on a clean install of debian.
iperf client running on laptop connecting to server with issue:
Code: Select all$ iperf -c 192.168.10.187 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.10.187, TCP port 5001
TCP window size: 129 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.10.131 port 55340 connected with 192.168.10.187 port 5001
[ 6] local 192.168.10.131 port 5001 connected with 192.168.10.187 port 52664
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 247 MBytes 207 Mbits/sec
[ 6] 0.0-11.5 sec 1.00 MBytes 730 Kbits/sec
I've tried with different cables on the server, no luck. Also note that the laptop gets full speed to speedtest.net as per my internet subscription (75/75 gbit fiber), so the laptop can be ruled out as a problem since it gets more than 75X performance to the internet compared to the local server.
The main purpose of this server is to be a virtualbox host. I've set up one guest system and ran iperf between the host/guest (bridged network). It gives better numbers, still the host -> guest direction is much slower than it should be:
Code: Select allClient connecting to 192.168.10.187, TCP port 5001
TCP window size: 108 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.10.163 port 48573 connected with 192.168.10.187 port 5001
[ 5] local 192.168.10.163 port 5001 connected with 192.168.10.187 port 48856
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.65 GBytes 1.42 Gbits/sec
[CODE]..
Exactly the same computer have no network issues at all, when on windows. It is a fresh install of Ubuntu 10.04 LTS 64 bit desktop. I have installed the proprietary driver for my nvidia card.
My motherboard is Asus P8P67 rev 3.0 Using scp, I'm getting 100-500kb/sec, if I get a connection at all. I have tried 2 different switches (both working fine in windows, though). Network goes down completley every 2 min or so, and is gone for 30 sec.
Some output:
dmesg | grep eth0:
[ 1.265601] eth0: RTL8168b/8111b at 0xffffc90000676000, f4:6d:04:9c:7f:d6, XID 0c900800 IRQ 33
[ 2.773959] r8169: eth0: link down
[ 2.773974] r8169: eth0: link down
[code]....
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I installed the driver from Ralink (2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO) and followed the instructions in other threads and my card does not work. I am getting this message.
"$ dmesg | grep -e rt5 -e wlan
[ 14.454006] rt5390sta: module license 'unspecified' taints kernel. I have also installed the Ralink RutilT program using synaptic. I can see my wireless device and many others around me but I can't connect.
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies View Relatedthis is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies View RelatedI just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
I've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.
View 5 Replies View RelatedI use Ubuntu 9.04 and try to get a Sweex LW053 USB wireless card (Ralink RT73/RT2500 chipset) to work. According to the Wiki list in the sticky thread, this one should work "out of the box" since 8.04.
lsusb delivers
Bus 002 Device 002: ID 148f:2573 Ralink Technology Corp. RT2501USB Wireless Adapter
and there is also some wlan0 entry that doesn't look too dodgy when typing ifconfig.
From this I get that my laptop recognizes the card.
I also typed in some numbers such as SSID and DNS server address in Preferences>Network Connections where asked (although the information that I had wasn't 100% what was asked for so I tried to guess what needs to be filled in which fields).
However, I don't get an internet connection (Firefox can't find server...)
What else do I have to (or can I) do?
I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.
Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree
[Code]...
I have strange behaviour on my portable computer Asus UX30. I'm using latest Ubuntu 10.10 release. The main problem, and the most annoying, is a system freeze on shutdown, suspend, hibernate or even restart. For a week I'm trying to find a solution on the web, but no result. From what I noticed, computer freezes when a wireless card is turned off or on. Here are some basic info from wireless card:
Code:
sudo lshw -class Network
*-network
description: Wireless interface
product: RT3091 Wireless 802.11n 1T/2R PCIe
vendor: RaLink
[Code]....
I use Ubuntu 11.04 on a PC clone desktop.With ethernet cable connects automatically, despite compiling wlan0 not connected. Do not know what I installed Ubuntu 10.04 and 11.04 over 30 times and still the same. Try to manually connect to the network connection did not work either hidden and also deal with ipv4 address assigned and neither worked.
1 ) Machine Brand and Model (PC/Laptop):
desktop pc, clon.
2)lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)[code].....
Try setting manually to no avail not know if I did well. Ralink also downloaded from the rt2860sta and then compiled and did not work. Now I went to install Ubuntu 11.04 and change nothing but that which is above is what I have right now in the machine.
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies View RelatedI just installed Fedora 13, and now I figured, maybe I don't know so much about pc anyway. Before I tell you my problem, I would like to say that I know a lot about windows, but about linux, I don't know anything. A plain beginner. And about my problem, it's more like a "how to" question than a problem.
You see, I don't know how to set up the wifi? The pc has installed wifi, and all I need to know is how I can connect to the internet. In windows you would usually just press the connection icon and then choose witch network you would like to access, and then eventually type in the password, and there you go. But it seems it's a little more advanced at Fedora. But I will give it a shot.
