CentOS 5 Hardware :: Sound Stopped Working On Dell Inspiron E1505
Sep 27, 2009
I have made sure the card is not muted using kmix, alsamixer, and running alsaunmute 0. It was working for some time and just stopped. I am not sure if getting rdesktop to work on the laptop caused the issue or not since that seems to be the last major thing I did. (missing my sipie.py). This is what I am working with:
~]$ uname -a
Linux xxxx.xxx.xxx 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
Just got a Dell Inspiron N5030. Internal speaker works. I can make a skype test service with internal speaker device. When I plugged the head phone, the head phone does not work. No problem with the head phone indeed. I have searched the forum for N5030 key word. But never able to find one.
I am using Ubuntu 10.04 LTS
- the Lucid Lynx - released in April 2010 and supported until April 2013.
I upgraded. Now I cannot use wireless. lshw -C network gives me this:
i cannot see anywhere that i have my old wlan0 connection configured. i have done this before, YEARS ago and my config survived many upgrades, but i have settled into a bit of a complacency and long since forgot how to amend this.
I have recently upgraded from 10.06 to 11.04 today and am having problems getting my wireless working. On 10.06 it was working just fine after I used the additional driver utility. Now on 11.04 I have used the additional driver utility and installed the Broadcom STA wireless driver that it says is required, but the internet connections on the top toolbar only recognizes my wired connection.
I have been using Ubuntu since September of last year (2010) I haven't realized it, but my mic isn't working. I'm am not entirely sure what type of mic I have, but the output of "lspci" are as follows:
I'm on a Dell Inspiron 1525 running Arch Linux with an Intel 965 GM video chipset (from dmesg). I'm using the xf86-video-intel driver, and Xorg (using xfce4) works flawlessly, including compositing. Before getting into details about the HDMI, I'd like to ask why I don't gave an xorg.conf.d/10-moniter.conf, it's not there, just evdev, quirks, and synaptics (because I figured that moniter.conf could be modified to include HDMI). So, basically when I'm on my XFCE4 desktop, I plug in the HDMI cable and to the TV, and on windows, it would would work, but on Arch the TV just says: "No input", and my desktop just stays the same, so absolutely nothing happens. If I have it connected upon bootup, the HDMI displays (the BIOS and grub menu on the TV) until I select to boot Arch linux on Grub, then the tv screen goes blank. I've tried Googling this but I got no decent results, just a bunch of random posts of audio not working with Nvidia.
PS - I did dmesg and lspci (with grep HDMI) and no results, so maybe it doesn't even recognize it, but then what do I do? There's obviously Linux support for HDMI...
I am trying run the 5.3 LiveCD on a Dell Inspiron 5100 laptop. If I boot the typical LiveCD I get no display once everything is loaded. If I boot the text version and then perform a startx command I still get no display. I have been able to install other Linux distributions without this type of issue. Is there a way to configure something for the display to function properly?
As the title says the option in the SCREENSAVER(Power Management Preferences)Put display to sleep when inactive for is not working. I have selected 2 minutes, and even after 1 hour it will not shutdown the display.
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
The only problem I've had so far seems to be a common one but I haven't found a specific solution for a dell inspiron 700m. I have sound through the headphones but not through the laptop internal speakers. I've played with the alsamixer settings endlessly but no success, and I'm 99% sure that it's not an issue with the hardware or speaker wiring. I suspect I need to add an 'options snd-hda-intel model=xxxxx' line to alsa-base but not sure what argument to use.
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
ok basically i have a new dell inspiron n5010 with a broadcom 4313 wifi card. it doesnt work with ubuntu studio 10.10. I have the drivers all installed and it works on ethernet with the broadcom STA proprietry driver. if i disable this driver the eth doesnt work. but the driver shows its working (screenshot-1).
There is no pop up or anything in the task bar for detected wifi. i open the network settings and it shows up with a wifi option but i have to go into properties and manually type in what i have "the_den_meribel". which didn't work. (screenshot-2).
i have tried the other driver broadcom-sta-common and that doesnt make it work either. screenshot-3. i did try to install the "lp-pphhy" or whatever it is (seacrh for firmware-b43 in synaptic).
i have a list of results from what i have typed into the terminal: dell inspiron n5010
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
I took the plunge and made a clean install of 10.04 because it sounded cool (and it is, I like it!) and now I'm tied to a wall again I've gone through several of the broadcom wireless card tutorials on the forums and the only thing I've managed to get is a lit up wifi light. It's not detecting an active unsecured network several inches away, that has computers up and running on it... I'm perfectly willing to post more details as needed.
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
Strange thing is that the headphone jacks still work just fine. Used to be that unplugging the headphones would cause the sound to come out of the laptop speakers, but now sound never does. I'm wondering if the software that controls the routing of sound between the speakers and the headphone jacks is messed up?
The sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.