Ubuntu Networking :: Adding Network Printers To Server 9.10?
Mar 1, 2010
I have Ubuntu Server 9.10 up and running as my file server. However, it sits amongst other PCs running XP Pro and Network Printers (e.g. Xerox Docuprint C2535A) on the network. My question is whether there is a way of adding the Xerox printer to the Ubuntu Server so that other PCs will send print jobs through the server. I think the printer is windows-based printer. Is it possible to do this? or are there any other options that you may be able to share with me?
View 3 Replies
ADVERTISEMENT
Jan 28, 2010
I've been using Kubuntu 9.10 for several months now. For most of that time, I configured and used with no problem several network printers.. a HP LaserJet 3015 at home connected to a Windows machine, and a Xerox Phaser 8560 at my coworking space connected directly to a router.
However, several weeks ago I was at the coworking space, requested a print from my web browser, and in the printer selection dialog, observed the list of printers expanding... some sort of autodetection of network printers was occuring, and multiple instances of the same printer were being offered, with slightly different names. Printing to these devices did not work.
Now, after a reboot, there are NO network printers available no matter what network I'm connected to. When I use the Kubuntu printer configuration tool and try to set up a new printer, it asks me to "Select a connection" to which the only option it gives me is "Other". When I put in an address for the printer it just cycles endlessly, never finding anything.
View 3 Replies
View Related
Feb 15, 2010
I've had Kubuntu 9.10 32-bit running on my laptop since it came out, but in the past month all its networked printers have disappeared from the configuration, and I can't set up any more. I've been through the forums again and again and cannot fix it. I've installed and reinstalled lots of packages related to CUPS but it doesn't seem to make a difference.I'm not sure what has happened, but I have lots of clues. Since I'm reaching the limit of my know-how here, I'll just list all the clues.
I'm pretty sure the problem is in my Kubuntu laptop, because in my SOHO setup I also have a Kubuntu 9.10 desktop (this time 64 bit) connected to a printer, and I have successfully printed through that from both a Windows XP laptop and a Xubuntu 9.10 box.On the Xubuntu 9.10 box, I just asked for the GUI print configurator and it automatically detected the network printer. No muss no fuss.But on the Kubuntu laptop, when I go into the print configurator, here's what happens:
- it shows two options, "new printer" and "server settings" (image a.png)
- entering "server settings" everything is greyed out and unchangeable (image b.png)
- entering "new printer" shows only one option for a connection, "other" (image c.png)
- after entering the address of a printer i know works (image d.png) the configurator has detected the printer (image e.png)
- but then attempting to move forward it crashes with no explanation.
Running the non-kubuntu version of the configurator GUI provides a bit more information before it fails. When I try to access the desktop with the printer attached it wants a username and password. (which wasn't necessary for the two client machines who successfully printed.) And at the end of the process there is an error: "there was an error during the CUPS operation: client-error-forbidden".
Two more clues:
- when I try to go with my browser to localhost:631 the browser can't establish a connection
- but I can see the cups page on the printer's host machine at 192.168.0.104:631 no problem.
View 2 Replies
View Related
Jul 28, 2010
Is there an ink level app that works with network printers? I am currently using Ubuntu Lucid x64 with a Canon MX860 printer that was installed using this tutorial: [URL]. Everything seems to work fine (it prints) but I cannot get any of the ink level apps to work (Mtink or Inkblot). After doing some research, my conclusion is those apps only work with USB connected printers. Is that true?
View 3 Replies
View Related
Jun 28, 2010
I'm trying to write a script that will add multiple printers in CUPS, ( OS=Ubuntu 10.04) but when I run the script it doesnt want to add the variables (which will be the IP's and Printer Names). Im thinking my variables are empty!Heres the script:
sed -n 'N;s/
/ /p' sapsvr009.q | while read line
do
[code]....
View 5 Replies
View Related
Apr 15, 2010
I need help setting up network printers I have two computers, they both have ubuntu on them. The internet comes in to the first computer on a usb modem, it is routed out from ethernet to wireless. I used CUPS on computer two and printed out a test page that worked, but it won't print out anything else.
View 1 Replies
View Related
Nov 3, 2010
I can't install printers shared by a computer running Windows 7, I try to add a new printer using samba, it shows me the other computers but I cant see any printers.
View 4 Replies
View Related
Apr 6, 2010
1. My machine [running Karmic Koala] is part of a corporate LAN with NIC details below
Quote:
2. My routing table:
Quote:
3. The network printer's details [as read from the printer's display interface]:
Quote:
My question:
This printer can be discovered by windoze machines using "Find printers" and then added. [Am not sure how this works!]
But when I try to discover the same from my ubuntu machine, its not getting discovered. Tried pinging the ip [172.20.254.158] which gives the following:
Quote:
Now I tried fiddling around with the route command along with good amount of googling but to no avail.
1. Is there a way I could add that printer to my machine?
2. If yes, how could I? Does it involve adding routes?
View 2 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
Sep 21, 2010
I just setup a Ubuntu CUPS print server. However when I I try to browse to it, it tells me that I do not have permission to do so and does not let me see the printers or any shared folders.
View 5 Replies
View Related
Aug 5, 2010
I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies
View Related
May 10, 2010
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies
View Related
Apr 17, 2010
I've switched to a new motherboard, an Asus P6T SE one, and now I don't have any cable connections in Networkmanager anymore.
I see the new card when I run "ifconfig", it's called "eth2", but I have no idea where to go from here without messing up networkmanager.
View 1 Replies
View Related
Sep 2, 2010
I installed CentOS 5.5 on my Compaq desktop PC connected to a LAN/Router, at the installation somehow the LAN connection was automatically determined and I was able to use the browser without doing anything.However when I added a print server to the LAN/Router I lost network connection from my Compaq PC running CentOS 5.5. Is there a way to rerun network manager installation to determine the new LAN settings (with a print server attached)
View 7 Replies
View Related
Sep 6, 2010
When I installed CentOS, I forgot to modify the settings of Network Time Protocol. I need to do the following:
1. Enable Network Time Protocol.
2. Add a new ntp server to the list.
How I can do this after the installation. Is there an utility to handle this? or do I need to modify any files manually?
View 2 Replies
View Related
Oct 9, 2010
I have a shared printer on my Ubuntu 10.04 machine, and it cannot be seen by other computers (macbook, pc) on the network. I have the printer shared, but it is not a member of the 'Shared Printers' group. When I add it to the 'Shared Printers' group, it stays there until I close the 'Printing' application GUI. Then, when I re-open 'Printing,' it is no longer in that group. I think this is why I can't see it on the network, due to the wording of the option in Server Settings to 'Publish shared printers connected to this system.'
View 3 Replies
View Related
May 10, 2011
First I will give some background. We have a currently working network that the Previous network Admin assigned an internal IP scheme of 200.1.1.0/24. I have no idea why he would have done such a thing, but it is my job to fix it (and keep our systems up and running). We have a Fedora 10 box on the 200 network that is acting as a router and a firewall (shorewall to be exact).
I added another NIC card (thank you again to all the great people on this forum for helping me get that working) and it is eth2. Assigned it a 10.100.1.A/24 (This is just a variable for the real IP). The other end of the cable that I plugged into that NIC connects to a Cisco Layer 3 switch. I assigned the port that connects to the other end of the cable the IP address of 10.100.1.B/24
Ok, I added the static route of ˜ip route add 10.100.1.0/24 via 10.100.1.A dev eth2' I added loc2 (which is my eth2 adapter) to the /etc/shorewall/zones file. I set eth2 on loc2 in the /etc/shorewall/interfaces file. loc2 eth2 detect I set the lines in the /etc/shorewall/policies file loc loc2 ACCEPT info loc2 loc ACCEPT info I can ping the cisco switch from the linux server itself. From a PC on the original network I can ping the new NIC card in the linux server, but cannot ping the cisco switch, so I figure it has to be either the route or shorewall.
View 13 Replies
View Related
Mar 23, 2011
My workstation is on a network, let's say 10.100.0.0/24. I'm opening up an openVPN Tunnel to a test environment in my company, receiving a lot of routes to this network (address range 172.xx.yy.0). Everything is working fine so far. In this test environment I placed a number of virtual systems having their own private network (10.99.0.0/24). I have one machine in this virtual cluster which is able to forward incoming IP traffic to the others.
When I login to this gateway system, using the 172.xx.yy.zz address, I can logon to the others using the 10.99.aa.bb addresses. Fine so far. But I have to be able to call these machines with the 10.99.0.0/24 addresses from my laptop. So I tried to add a route like:
route add -net 10.99.0.0 netmask 255.255.255.0 gw 172.xx.yy.zz
Unfortunately I received an error messages:
SIOCADDRT: No such process
According to the entries in other forum articles (Google helps in most cases), I have to add a host route first:
route add -host 172.xx.yy.zz gw 172.well.defined.dest
View 1 Replies
View Related
Dec 22, 2010
I have an existing network that connects to the 'net via a Linux-based firewall. That system has two ethernet interfaces: one to the DSL modem and the other to the internal switch. Future plans were for adding a second "internal" interface with the idea of moving servers into that (think DMZ). But while I was planning for that, the missus has decided she wants to pick up a Windows laptop and would like to be able to use it wirelessly at home. I have access to a (free!) Netgear WGR614L and was hoping it would work. Unfortunately, I'm unsure how to add the wireless capability to our network.
Questions:
Is it best -- or even possible -- to use one the wireless router for this?
Is it possible to merely hang the Netgear router off the internal switch and set it up for the wireless users? Or...
Would I need to add another ethernet interface to the firewall and hang the router off that? The address of this new interface would act as the default route for the wireless users. Then I'd need to (I assume) add more rules to the iptables configuration to deal with the new network. (I sort of like this option -- it it's actually feasible -- as I can easily shut down any wireless access by logging into the firewall and stopping the interface connecting the wireless router.)
I've taken a look at the setup guide on the CD that came with the router and it assumes that you have a modem connecting your PC to the internet. The instructions have you placing the wireless router between the modem and that PC. For our network, that would have the wireless access coming into the "dirty" side of the firewall. (Not what I would like.)
View 4 Replies
View Related
Sep 18, 2010
I'm a newbie on lucid lynx 10.04
The Hardware:
Mac Mini late 2009 running 10.6.4 (Snow Leopard/OS X)
Dell Dimension 2400 running Ubuntu 10.04 Lucid Lynx
HP Photosmart C4680 multifunction printer/scanner/copier
Canon PIXMA MX310 multifunction printer/scanner/copier/fax
Netgear Wireles-N 150 router model WNR 1000v2
[Code]...
As the HP Photosmart printer is currently connected, it is visible over the network by the macintosh however will not print (all jobs appear in the macintosh's queue without a "hold" designation, printer not on pause. pause/resume only changes the tag on the printer but does nothing to cause the queue to begin printing). Although I can navigate within the printer setup to the existing printer on the network, I cannot connect the printer on the mac without finding a new "printer" instance on the Ubuntu machine when I get there. The printer instance which works is the one the Ubuntu machine created, and the printer instance which does not work is the one generated by the mac, which doesn't work either from the mac or when printed to from the Ubuntu machine, now that this instance exists there.
With the printer connected to the mac, it is visible over the network to the ubuntu box however asks for authentication for the print queue and will not accept any password established for either machine. It also does not specify what account name the password should match with so is an utter quandary.
lastly, I did run dmesg but the result was too large for my terminal's log and scrolling back through it I did not find a section relevant to the HP (or Canon) printer to post here.
View 1 Replies
View Related
Sep 1, 2011
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies
View Related
Oct 3, 2015
Debian Testing, updated daily, running Gnome.
A week ago, a new router was installed at the office and now my system "loses" the networks printers and forces me to manually select them within Cups various times a day to be able to print. The issue was not present when the old router was in place, and all my colleagues can print without problems using their Windows machines.
This only affects printing, for Simple Scan can always communicate with the printers without problems.
The printers are two basic Epson L355 (those with ink tanks) and the "official" driver (from Open Printing) has been working perfectly since I installed Debian. The whole Cups and Avahi stack is installed, and I even added system-config-printer this week to make sure that I was not missing a package.
Because the only variable that changed is the router, there has to be something there messing with my Cups or Avahi configuration.
Note that the new router had a "vanilla" installation, where no advanced settings were touched. All connected devices (computers, mobile phones, printers, etc.) are given new IP address through DHCP every day.
Where should I start? I have already deleted and added the printers within Cups several times during the week, and the problem persists. Is the router renewing the address more often than the old one did? Can this "refresh" be delayed? Should Avahi monitor devices more often?
I guess that I could configure the router and give static IP addresses to the printers, but such a setting was not present in the old router and my computer could locate the printers without problems.
View 3 Replies
View Related
Jul 12, 2011
I run a laptop behind a server. Because I could not find the printer I disabled the firewall and now I can detect the printer, but when I want to select the printer the program hangs.
View 5 Replies
View Related
May 31, 2011
I got a task to discover printers available in my network using cups.
View 10 Replies
View Related
Mar 12, 2011
I noticed that KDE does not have a way to browse for network printers like Gnome does. I installed system-config-printer to fix this(if there is a KDE route that would be nice as well). Anyway, I go to add a printer and select "Network Printer" and click "Windows Printer via SAMBA". This is where i would typically press "Browse..." but it is unclickable. This leads me to believe that I am missing a package. Essentially my question is: What are the necessary packages to access Windows printers via SAMBA with system-config-printer?
View 3 Replies
View Related
Jan 12, 2012
I'm having a devil of a time trying to set up printing with 3 network printers: an HP Laserjet P4014n, an HP Laserjet 5200tn, and an HP Officejet Pro 8500 a909a. The three printers are connected directly to the office intranet and have their own ip addresses. The system I'm trying to configure is running Wheezy, and HPLIP and Cups are both installed. I have confirmed (from [URL] ....) that all printers are supported.
First, running "hp-setup -i" (hplip-gui is not installed -- I do not wish to pull in half of KDE simply to configure printing), the program only finds the 2 laserjets. Adding one of them creates a printer in CUPS with an "hp:/net/<printer name>" connection. Attempting to printing a test page through CUPS fails with message "/usr/lib/cups/backend/hp failed".
Interestingly enough, running "hp-probe -bnet" finds all three printers. However, running "hp-makeuri" with each printer's ip address fails with "error: Device not found". Hmmm, so HPLIP can apparently go from seeing everything to seeing nothing. Very useful.
Moving to the CUPs browser interface, clicking "Find New Printers" under the "Administration" tab also only shows the 2 laserjets, although each is listed three times(!). The only difference that I can see among the three versions of each printer is in the connection uri:
dnssd://<printer name>._printer._tcp.local/
dnssd://<printer name>._pdl-datastream._tcp.local/
dnssd://<printer name>._ipp._tcp.local/
Adding any one of them seems to work, although I do not understand why there are three of them (presumably different protocols, though what they are and the differences between them are, I don't know).
Logging into the officejet control panel and browsing at its network configuration, I see mDNS, SNMP, and WINS are disabled, although SLP is enabled. Looking in '/etc/cups/cupsd.conf', I see 'BrowseLocalProtocols' is set to only CUPS and DNSSD, so I add SLP and restart CUPS. No change; the officejet still doesn't show. I go back into the officejet control panel and enable mDNS (which, if I understand correctly, is essentially the same as DNSSD). Nothing; the officejet still doesn't show.
View 5 Replies
View Related
Mar 3, 2011
I currently have a home server, running Gentoo, with IPv4 connectivity through Qwest.I feel that it is important that this server also be available through IPv6 (I'm aware that, after exhaustion, my end still might not get an address through DHCP).I currently use dyndns.org to provide me with a DNS entry mapping jrvanwhy.homelinux.net to my IPv4 address.I do not have any sort of tunnel set up yet for IPv6 traffic yet. The new domain name does not necessarily have to be the same [URL].I do not wish to spend any money on this.Is there some free service I can register for that would do both the tunneling and the DNS entry? Is there a service that can supply me with an IPv6 DNS entry, if I get a static IPv6 address with another tunnel broker, like Hurricane Electric?
View 2 Replies
View Related
Jun 6, 2011
Is it possible to access windows network printers from a VirtualBox WindowsXP client running under Ubuntu 10.10 host? The networking type is NAT. Would Bridged Networking solve the problem? If so, is there a tutorial on how to set up bridged networking for virutual box?
View 1 Replies
View Related
Mar 26, 2010
I need to configure printers on a red hat 5.4 server using LPD compatibility mode.
View 2 Replies
View Related
Oct 13, 2010
I have CentOS 5.5. server on 2 raid 1 drives .The system is a quad core Intel CPU with 2GB RAM.Printers:-
HP p1006 laserjet
HP multifunction 5600
Canon prixma ip3000
Canon prixma ip4500
I cannot get any of these printers to work on this server.
View 2 Replies
View Related
