I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.
I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:
I have a brand new ASUS EEE PC 900HA with Ubuntu 9.10 installed on it. The wireless hasn't worked yet but the ethernet is fine. I've been browsing the forums for hours to find a fix but now I've installed/queried/removed so many things I'm totally confused.
lspci -v gives me this
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324 Flags: bus master, fast devsel, latency 0, IRQ 27
I have installed CentOS 5.3 on my PC which has an Atheros AR8121/8113/8114 Gigabit Ethernet. Unfortunately 5.3 has no drivers for this LAN Card. I searched the Google for drivers but was unable to find any. Does the 5.4 has them? If yes then how can i upgrade it to 5.4 without Network connectivity?
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
i have a centos 5 and i cant access to the LAN or Internet because , i cant create a network connection , i try to say My Ethernet dont appears,and i cant add any connections.i id thisTerminal:Quote:sudo iwconfig
I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.
I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
I'm using Ubuntu Server 10.10 64 bit and am trying to get my Atheros AR81xx gigabit ethernet controller to use 1 gbps.I have 2 ethernet controllers, one's a linksys 100 mbps (which is connected to the router which goes to the internet) and the other is the Atheros gigabit controller that is connected to a Windows desktop that has an NVIDIA gigabit ethernet controller (for faster file transfers with a gigabit connection) I've ruled out that the problem is with the desktop as I plugged the windows PC into my macbook (which has a gigabit controller), and both the macbook and desktop report a gigabit connection.
I plug the windows desktop into the server and I only get 100 mbps. I am using a Cat 6 patch cable. I've tried several methods with ethtool to force it into 1 gbps mode, but none work. I've tried using a different cable. no change. I've tried making windows force a 1 gbps connection, didn't have the option to in the driver configuration. Only 10/100 configs. the commands I've tried in ethtool
Code:
ethtool -s eth0 speed 1000
Reports no error, but no effect. I've tried forcing off auto negotiation (I had a hunch it was causing the problem)
Code:
ethtool -s eth0 speed 1000 duplex full autoneg off
I get this
Code:
Cannot set new settings: Invalid argument not setting speed not setting duplex not setting autoneg
I tried each setting individually, and autoneg won't set, the others will (but not do anything)
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774 (13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
I realise there are a few threads of issues with the AR8152 chipset and Ubuntu 11.04, however, my issue does not appear to be the same as others, nor does there appear to be a consistent solution yet. My ethernet worked fine in Ubuntu 10.10, but after upgrading to 11.04, I experience the errors I am about to explain. I also experience these when booting off a Ubuntu 11.04 Live CD, so it's not just the upgrade the caused the issues. The issue is, if I turn on my system without the ethernet cable plugged in, and then plug the ethernet cable in once I've logged into Ubuntu, the system will not detect it, at all. No amount of network manager of dhclient eth0 will get it to function, however, the device itself still appears in the system. If I turn the system on with the ethernet plugged in, however, it will get an IP address and function correctly. I tried to download the drivers from Atheros and build them, but for whatever reason it complained about me not having autoconf.h or automake.h (can't remember which), despite having build-essentials and linux-headers-generic installed.
I am attempting to install Debian 5.0 amd64 to my Toshiba laptop, which has an Atheros AR8131 Gigabit network card.Unfortunately the installer is not finding the card. I have downloaded the Linux drivers for my card to a USB drive. When I tell the installer to load the drivers from removable media it is telling me that it is not able to read the files. I am guessing that I either need to place the files into a particular named directory or I have the wrong file format (currently a .tar)
I just installed Slackware 13.1 on my new Toshiba satellite c650 and my ethernet device isn't working. I have tried to compile the driver provided by atheros but being a newbie i failed. I understand that there's a driver included in the kernel, so why isn't it loading? The info center list my PCI LAN card as "attansic corp device 2060".
I have an absolutely bizarre hardware issue (concerning the Atheros AR8132 PCI-E Fast Ethernet Controller) that has been giving me quite a bit of grief for a while, and having completely hit a wall on this one, I'm a reasonably-experienced Linux user of several years, and have been running Ubuntu 9.10 on an Acer AOD250 netbook for several months out. I know that this model has wireless issues out-of-the-box (easily fixed), but it did not have any noticeable ethernet issues. That is, until I attempted an installation of Arch Linux.
During the Arch Linux installation, the ethernet card was initially detected, but unable to be used (because of a bad module in the kernel released with the installer). As I didn't know the fix for this at the time, I decided to reinstall Ubuntu 9.10. This time, however, the system failed to recognize the wired ethernet whatsoever. Instead, the external activity lights for the port (green and orange) are ALWAYS on, yet the device doesn't function.
I have done a successful install of the latest drivers directly from Atheros for the device and have them automatically loading with the kernel during boot, but as the device isn't recognized, the drivers aren't doing any good. Relevant information:
have a toshiba satellite L745 running Lucid Lynx I need drivers for the Atheros AR8151 ethernet card. Every post I have read on installing the driver give links to Atheros but they are all broken. Does anybody know where I can download driver?
I have a PCCHIPS P47G motherboard, with a Atheros AR8112 ethernet interface (took me a while to even find that out!). I can not find a driver for that interface! I've Googled around for drivers and come up with nothing.
I use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.
Is this a hardware issue? The green lights are all blinking fine though.
I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.
But when I try to make it it give following error. Code: Makefile:173: *** *** Aborting the build. *** This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver. Makefile is attached here (renamed as Makefile.txt -> Makefile)
I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.
It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]
I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".
i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.
lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:
Broadcom NetLink BCM57780
I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.
------------------------------------------------------- EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card
leopard@brokenbox:~$ ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host
[code]....
I have had this issue before, and fixed it by booting into Windows XP SP3 and pressing and holding the power button down until the computer shuts down. (e.g. "Unclean or "Illegal" or "Cold" boot.) Unfortunately, not having Windows XP SP3 on my system anymore, I have to do this in Ubuntu. I have tried several times, and it is clearly not working. I don't want to try too many times more for fear of damaging my ext4 file system.
I looked for this issue on Google and found only driver problems, not device problems. There is no Ethernet option in the BIOS, except for the Network Boot, which should always show the device whether its in use or not. Is it silly to ask if Windows in a VM in an unclean shutdown may solve the problem? The driver for the device is currently supported by the kernel out of the box:
Code:
Linux brokenbox 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
It uses/used the atl1c driver. It was working on the same install just about a day ago!
I just bought a new server with one of the most recent v3 Intel processors (socket LGA1150). The board (Supermicro X10SLM-F) uses the new Intel NICs (i217LM + i210AT), not supported by the current Debian stable release. Hence, the ethernet adapter is not recognized during the installation process.
I would like to be able to install something as close to stable as possible in a production server such as this one.
I patched my wireless driver in order to support packet injection. Using this tutorial:
- Install the Firmware:
Code:
- Create new directory:
Code:
- Now disconnect Internet and unload all your driver (use rmmod command)
- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:
Code:
Blacklist the wl driver: (STA driver)
Code:
Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:
I've an USB Network Controller product from China with no driver for Linux... It's seem in my FC10 not correctky fuctional... On Windows it worked as SR9600 USB To Fast Ethernet Adapter... here is my log...
Code:
[root@home ~]# dmesg | grep USB ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found
