CentOS 5 Hardware :: USB 3.0 Controller Not Recognized?

Oct 13, 2010

I have just installed a NEC 3.0 PCIe board in my CentOs 5 box, but the card is not recognised, and no drivers seem to be loaded for it. lspci says: USB Controller: NEC Corporation Unknown device 0194 (rev 03) The vendor says the board is supported on Linux kernels 2.6.16 and later. uname says my kernel is 2.6.18-194.17.1.el5

How do I get this device to be recognised, and drivers loaded for it?

View 19 Replies


ADVERTISEMENT

CentOS 5 Hardware :: ServeRAID Controller Not Recognized?

Aug 4, 2009

I have an old IBM Xseries 300 server that i can use. So, i am trying to install Centos 5.3, but during the installation , no disk can be found. I have 2 disks (1+1 in mirror) connected to an IBM serveraid PCI card.

I installed Debian Lenny, and it recognize the card (so the disks) immediatly.

~# lspci | grep RAID
00:09.0 RAID bus controller: IBM ServeRAID Controller
~# dmesg | grep scsi -i
[ 1.527963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.092981] SCSI subsystem initialized

[Code]....

View 5 Replies View Related

CentOS 5 Hardware :: Broadcom Ethernet Controller Not Recognized?

Sep 7, 2010

Running CentOS 5

System see the device with an lspci, yet will not load

Vendor:Device ID is 14e4:1691

Broadcom BCM57788 on board ethernet controller

Cannot find driver or anyone that seems to support it. Am I missing something?

This is in a Dell computer.

View 10 Replies View Related

CentOS 5 :: Eucalyptus Node Controller And Cloud Controller Apps Won't Bind To IP

Jun 18, 2010

I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:

Cloud Controller:

[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774

[code]...

View 2 Replies View Related

Ubuntu Servers :: IBM Raid Controller Not Recognized

Jun 3, 2010

I'm having a problem with the installation of Ubuntu Server 10.04 64bit on my IBM xSeries 346 Type 8840. During the installation the system won't recognize any disk, so it's asking which driver it should use for the RAID controller. There's a list of options, but nothing seems to work. I've been searching the IBM website for an appropriate driver, but there is no Ubuntu version (there is Red Hat, SUSE, etc). I was thinking about downloading the correct driver onto a floppy disk to finalize the installation, but apparently no 'general' Linux driver to solve the problem here.

View 1 Replies View Related

Debian Hardware :: VIA VT6415 Paralell ATA (IDE) Controller Not Recognized

Mar 27, 2010

However, I have the problem I can't see any devices on my IDE port in my Asrock P43 mainboard, because the VIA VT6415 IDE controller isn't recognized. I typed an 'lspci -k', and I can clearly see there wasn't loaded any module to handle this VIA PATA controller.

...
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Kernel driver in use: r8169

[code].....

View 2 Replies View Related

Debian :: Broadcom 4306 Network Controller Not Recognized / Fix It?

Jan 16, 2010

I've been trying for probably 10 hours now to get the bcm4306 driver working on Debian. I finally got it installed using ndiswrapper... However, now ndiswrapper says that the hardware is not present! When I run lspci, though, it lists BCM4306 as the network controller. What is going on, and how do I fix it? It's on a Dell latitude D600.

View 3 Replies View Related

Hardware :: SDL Joystick Event From N64 Controller Adapter Not Recognized

May 1, 2011

I'm using a "HuiJia USB Gamepad" to connect a standard N64 controller to my computer over USB. I'm doing this so that I can play games using mupen64plus, which uses the SDL to get input. My problem has to do with the way the adapter deals with C button events. Apparently, the u/d and l/r C buttons are treated by the adapter as joystick axes, so joystick events are generated by using them. But, for some reason, these events aren't recognized by SDL.

It gets stranger - if I cat the output of /dev/input/event5, the event gets printed when a C button is pressed. Furthermore, when I configure SDL to use the /dev/input/event* devices rather than /dev/input/js0, the C buttons are recognized! (Though, this leads to a situation where the joystick can't be calibrated... go figure). So, I can either have a correctly calibrated joystick with no C buttons or a miscalibrated joystick with working C buttons. Does anyone have any idea what I can do about this situation? The best outcome would be to force the C button joystick events to appear when using /dev/input/js0. Device as it appears in the output of lsusb:

[Code]...

View 1 Replies View Related

OpenSUSE Hardware :: Audio Controller/Sound Card (not) Recognized OS 11.2?

Jul 7, 2010

I have an issue with my Sound on OS 11.2.It is correctly recognized under hardware and the driver seems to start properly as well when I do rcalsasound start.But under Control Center / Sound Preference there is no audio hardware listed (and hene no sound playing)

View 3 Replies View Related

Slackware :: Intel 82801H - ICH8 Family - HD Audio Controller Recognized By Alsaconf But Doesnt Work

Mar 14, 2010

Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.

Quote:

Now ALSA is ready to use.

For adjustment of volumes, use your favorite mixer.

But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.

I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.

I have been trying, but never seem to understand why it says it works when it doesnt work.

Oh turns out, from thinkwiki, [url]

Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .

View 4 Replies View Related

CentOS 5 Hardware :: JMicron JMC250 Ethernet Controller Not Working On Centos 5.5?

Oct 29, 2010

I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release

centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5

[code]....

View 6 Replies View Related

CentOS 5 :: Installation Fails For Centos 5.6 With Marvel 88SE61xx Drive Controller?

Jul 29, 2011

I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?

View 1 Replies View Related

CentOS 5 Hardware :: CentOS 5.2 And 5.3 Does Not Recognize Device On IDE IT8213 Controller?

Apr 3, 2009

I have had a Supermicro X7DCL-3 motherboard based machine, running CentOS 5.2 x86_64, recently upgraded to 5.3.Strangely enough, although I must have installed the 5.2 using DVD disk, the running system does not show the DVD drive. The machine was not used very much so I noticed that only today, after the update. There is no trace of it in 'dmesg', thera are no /dev/cd* and/or /dev/dvd* devices. The IDE controller is IT8213 (as shown by 'lspci'). In 5.2 kernel (2.6.18-92.el5-x86_64) lspci says "unknown device". I have checked the /usr/src/kernels/*/.config files and both kernels (5.2 and 2.6.18-128.el5-x86_64 of 5.3) seam to have the support for that controller added into the kernel:CONFIG_BLK_DEV_IT821X=yAny idea why it is not working? The Supermicro has apparently noticed this also as their OS compatibility chart lists the IDE interface for that motherboard as supported up to RHEL 5.1 but not for 5.2.

View 2 Replies View Related

CentOS 5 Hardware :: BMC Module On Centos 5.3 (Baseboard Management Controller)?

Jul 22, 2009

I have some problem installing ASM Software (LANDesk) a BMC module on server ACER ALTOS G330MK2 with centos 5.3 totally updated. Could someone help me to understand wich is the problem ?

INFO:Installation is being performed on the RedHat Linux distribution.

DEBUG:distro:RedHat
DEBUG:Import of rpm-python code successful
INFO:bash is installed with version 3.2


[Code]...

View 4 Replies View Related

CentOS 5 :: Adding A New IDE Controller?

Sep 15, 2009

I want to add a new IDE controller, to the one I already have on board (I have only one). I disable the on board controller in order to boot the same disk using the new IDE controller.

The problem is that when I get to Grub it does not know where to boot from.
The system should boot from hd0,0 but it can't find it. I tried hd1, hd2 and hd3. None of them worked.

Do I need to edit Grub before installing the extra IDE controller?

View 10 Replies View Related

CentOS 5 :: How To Configure Domain Controller

Sep 11, 2009

How to configure centos 5.4 as a domain controller?

View 2 Replies View Related

Ubuntu :: Proper Analog Controller With Joypad/controller Mupen64plus?

Sep 15, 2010

Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.

I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?

View 4 Replies View Related

CentOS 5 :: Installing The SATA RAID Controller?

Mar 19, 2009

I'm working on a new server and it has an Nvidia SATA array controller with 2 250Gb SATA drives configured in a hardware array. When the first screen comes up I'm entering the option Linux DD for it to prompt me for the drivers but nothing ever happens. The screen says that it's loading a SATA driver for about 15 minutes and then the screen clears and has a plus sign cursor on a black screen. What am I doing wrong? The only driver that came with the HP server are for Redhat 4 and 5 and SUSE, will any of those actually work?

View 7 Replies View Related

CentOS 5 :: Setting Up As Primary Domain Controller

Aug 24, 2009

I have setup Ubuntu servers as LAMP machines but that's pretty much it.

I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:

1) A user should be able to login to the server from any of the workstations and then see their server stored documents

2) The clients will be a mixed bag of Linux, Windows and Mac machines

I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.

View 4 Replies View Related

Red Hat :: Adaptec Embedded SATA HostRAID Controller 7e On CentOS

Jan 10, 2010

I have been trying for a few days to install CentOS 5.4 on an IBM x306 and I cannot get it to properly handle the Adaptec Embedded SATA HostRAID Controller. I have been working with Linux for a few years, but this is new territory for me. I typically use Debian-based distros, but I did some research on the IBM site and found out that RHEL is a supported OS for this machine. So, I decided to give Cent a try. I have some experience with Fedora, so it's not totally foreign to me.

Anyway, I'm a bit confused. Using the IBM RAID utility, I set up a mirrored pair of 1GB SATA HDDs. When I run the Cent installer, it sees the pair as a single array. I am able to partition the array and complete the install, but when I boot into the OS, it sees the drives as 2 separate devices, sda and sdb. I can pull either one of the drives and boot with a single disk, but it doesn't seem to behave as a mirrored pair. If I make changes on sda, they are not replicated to sdb. Also, I can't use the cli or GParted to format the existing space on the array. I get an error either way. I believe this is because Cent doesn't have a driver for the RAID controller, but I don't see why it would work in the installer, but not the installed OS.

My next approach was to start over and attempt to run "linux dd" at the start of the installation. I tried to find the driver for the controller on the IBM site so I could load it when prompted, but couldn't find a newer version than RHEL 4 Update 3 (I'm assuming this would coordinate with CentOS 4.3). I tried it anyway, but when I select the floppy during the setup, it tells me it's not for this version of CentOS. I read several times that there are .img files that might help me in the 'Images' directory of disk one, but I only see diskboot.img, minstg2.img, and stage2.img. I don't think any of these are what I'm looking for. I thought there was supposed to be a drvblock.img or driverdisk.img.

View 3 Replies View Related

CentOS 5 Hardware :: Intel 82598EB 10G Ethernet Controller

Mar 12, 2010

Does centos 5.4 support this?

product code: E10G41AT2

[url]

View 1 Replies View Related

CentOS 5 Hardware :: Controller Supported By The Kernell, Plug And Store?

Jan 10, 2009

i am looking to buy a new sata controller to add more disk space (ever not enougth) to my home server. My os is a CentOS 5.2 X86_64 with the xen kernel. I want a controller supported by the kernell, plug and store.I found two boards looking interesting with a cheap price:- Dawicontrol DC-4320 with a SiliconImage Sil3124-2.- Promise FastTrak TX2300.The DC-4320 is better because has 4 sata ports Vs 2 ports for the TX2300, but this is not a big problem for me because i only can add two more disk on my box.I, am planing to buy a 1,5 Tb seagate disk (ST31500341AS), dont know if it may be a problem with the size.

View 6 Replies View Related

CentOS 5 Hardware :: Marvell 88SE6121 SATA II / PATA Controller

Sep 29, 2009

On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.

It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:

scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY

It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?

View 12 Replies View Related

CentOS 5 Hardware :: Install With Dell Poweredge Expandable Raid Controller?

Oct 4, 2010

I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.

The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?

View 2 Replies View Related

CentOS 5 Hardware :: 5.5 - Does Currently Not Support Oxford's OXPCIe952-F Serial Controller Chip

Jan 27, 2011

Is it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:

Quote:

root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[code]....

View 14 Replies View Related

CentOS 5 Hardware :: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller ?

Mar 31, 2011

I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.

I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:

View 5 Replies View Related

CentOS 5 Networking :: CentOS 5.2 And NVIDIA NForce Networking Controller

Jan 18, 2009

I'm having trouble to get connected to the internet on CentOS 5.2 . I have an NVIDIA nForce Networking Controller onboard. And I've been trying to find a driver for this, but I was unsuccesful so far. And if I have a driver, how do I install it? Could anyone please help me to get this working. I'm just a beginner with CentOS and Linux, so I don't have much experience yet. Oh, and I forget to say that Centos 5.2 on VMware does have internet, but I stopped using vmware because it became very laggy on my Vista OS, so I started to use dualboot.

View 19 Replies View Related

Hardware :: Give Centos Drivers For Embedded SATA Raid Controller On HP Proliant?

Feb 5, 2010

I forced my workplace to forgo windows and opt for linux for web and mail server. I'm setting up Centos 5.4 on it and I ran into a problem. The server machine is a HP Proliant DL120 G5 (quad core processor, 4GB Ram, two SATA drives, 150GB each attached to the hardware RAID Controller on board). RAID is enabled in the BIOS.I pop in the Centos disk and go through the installation process.

When I get to the stage where I partition my hard drive,it is showing one hard drive, not as traditional sda.but as mapper/ddf1_4035305a86a354a45.I looked around and figured that I need to give Centos the raid drivers. I downloaded it from:

[URL]

I follow the instructions and download the aarahci-1.4.17015-1.rhel5.i686.dd.gz file and unzipped it using gunzip. Then on another nix system, i do this:

dd if=aarahci-1.4.17015-1.rhel5.i686.dd of=/dev/sdb bs=1440k Note that I am using a usb floppy drive, hence the sdb. After that, during centos setup, i type: linux updates dd

It asks me where the driver is located. I tell it and the installation continues in the graphical mode. But I still get mapper/ddf1_4035305a86.a354a45 as my drive. I tried to continue to install centos on it. It was successfull but when i do a "df -h" it gives me /dev/mapper/ddf1_4035305a86......a354a45p1 as /boot

/dev/mapper/ddf1_4035305a86......a354a45p2 as /
/dev/mapper/ddf1_4035305a86......a354a45p3 as /var
/dev/mapper/ddf1_4035305a86......a354a45p4 as /external
/dev/mapper/ddf1_4035305a86......a354a45p5 as /swap
/dev/mapper/ddf1_4035305a86......a354a45p6 as /home

Well i know why it's giving these, because i set it up that way, but i was hoping it would somehow change to the normal /dev/sda, /dev/sdb. That means that the driver i provided did not work. I have another IBM server (5U) with raid scsi drive and it shows the usual /dev/sda. It also has hardware raid. So i know that there is something wrong with the /dev/mapper/ddf1_4035305a86......a354a45p1 format.

First, is there any way that I can put the aarahci-1.4.17015-1.rhel5.i686.dd (floppy image) on a CD?. I really need to set this up with raid. I know i could simply disable raid in bios and then i would get two normal hard drives sda and sdb. But it has to be a raid setup. Any way to slipstream the driver into the centos dvd? The hp link i provided above, under installation instructions, there are some instructions titled "Important". But I couldn't get it to work.

View 2 Replies View Related

Networking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?

Jun 26, 2011

I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.

I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.

I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.

NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7

When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .

View 4 Replies View Related

CentOS 5 Networking :: Filter Access Server Through The Net Only To Authenticated Users From Domain Controller (Win2k)?

Jul 17, 2009

Filter access server through the net only to authenticated users from domain controller (Win2k). Server (Centos)(Firewall with 2 nic), which makes access to the net, with only 196MB RAM (PIII500Mhz), so I do not want a solution based on proxy or what resources it uses large I want a solution with a script that runs at login on windows this check series HDD and to communicate with Linux server that's open accessor another simple solutionNow just use only MAC filtering on

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved