Debian Configuration :: Flash Disk And CDs After Complied New Kernel

May 18, 2011

im am new in compiling kernel, i had kernel 2.6.32-5 on debian 6 , so i compiled kernel 2.6.38.6 , my system can boot and up but i have a problem with flash disk and CDs and DVDs , now i cant mount these cases, in compiling i select CD-ROM /dvd filesystem and Dos/fat/NTFs filesystem too

View 1 Replies


ADVERTISEMENT

Debian Configuration :: Extremely Slow Transfer Rate On Flash Disk ?

Jul 12, 2011

Same computer and flash. Two results on different OS:

Write speed under debian: 0.4 MB/s

Write speed under Windows: 6.6 MB/s

From what i've been reading on the net I guess it's something to do with the mount - sync option.

I've notice that there are couple of workarounds but all of them are pretty tedious.

Is there any simple (GUI - one/two clicks) tool that allow to mount/unmount flash disk easily using the correct options?

I'm using Squeeze 6.0.2 (Kernel 2.6.32-5-amd64), gnome 2.30.2

View 2 Replies View Related

Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?

Jan 24, 2010

I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?

View 12 Replies View Related

Debian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel

May 13, 2011

I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".

View 1 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Way To Set Up Flash On Firefox?

Feb 9, 2011

I got firefox on my debian machine following the following steps- getting the necessary packages with apt-get update && apt-get install xorg iceweasel bzip2 libdbus-glib-1-2- downloading the latest version of Firefox on http://getfirefox.com- extract the firefox-3.6.13.tar.bz2 in the /usr/local/src folder- symlink the firefox folder that was created to /usr/local/bin withln -s /usr/local/src/firefox/firefox /usr/local/binNow, as I was looking for an easy way to have the latest version of flash running on firefox, I found this site:
http://fixunix.com/ubuntu/239011-firefo ... pdate.htmland applied what was said on the last reply but it didn't workI also found this thread and gave it a try:viewtopic.php?f=6&t=42905&p=347986&hilit=flash+10+firefoxbut I got a 'command not found' whenever I try a update-flashplugin-nonfree --install

View 5 Replies View Related

Debian Configuration :: How To Automount Flash Disks

May 17, 2011

I have installed a minimal system with openbox window decorator. (without any window manager) when i insert a flash disk to my computer, system doesn't mount it automaticly. i must mount it to a folder to use it.

for example:

View 14 Replies View Related

Debian Hardware :: Extremely Slow Transfer Rate On Flash Disk

Jul 15, 2011

Same computer and flash. Two results on different OS:

Write speed under debian: 0.4 MB/s
Write speed under Windows: 6.6 MB/s

From what i've been reading on the net I guess it's something to do with the mount - sync option. I've notice that there are couple of workarounds but all of them are pretty tedious.

Is there any simple (GUI - one/two clicks) tool that allow to mount/unmount flash disk easily using the correct options?

I'm using Squeeze 6.0.2 (Kernel 2.6.32-5-amd64), gnome 2.30.2

View 10 Replies View Related

Debian Configuration :: Save To Install Kernel 2.6.35.2 On Debian Lenny 5.0.5 Or Stick With Automatic Updates

Aug 20, 2010

is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...

View 14 Replies View Related

Debian Configuration :: Hostap & Prism Firmware Flash?

May 27, 2010

I'm mad at my ignorance and hope some of you will be able to put me out of my misery I have an IBM X22 with Prism 2.5 Wavelan PCI chip with old firmware, which I want to renew in an attempt to get the Wifi working. Here the output of hostap_diag <wlan interface>:

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.0.5
STAID: id=0x001f v1.3.3 (station firmware)

View 2 Replies View Related

Debian Configuration :: Swiftfox - Flash And Java Don't Work

Jan 8, 2011

I enabled java and flash in Iceweasel 3.5.16 via the related/required packages in the repository so flash-nonfree (or whatever it is) and the related java one. I didn't install either flash or java manually so no plugins that way. Flash and java works in Iceweasel. If I wanted to try Swiftfox, what do I do? I have it installed but both flash and java don't work.

I assume that one has to do the manual installs for both so go to both Flash and Java official sites and install the related Linux package. Will this conflict with my Iceweasel-based java/flash packages? Or do they go in separate directories and files? I don't want a conflict or interference and thus, don't want to break what's working.

View 7 Replies View Related

Server :: Installing Complied Apache Using Yum In RHEL 5?

Feb 20, 2010

I am using RHEL 5.4 Here is my requirement.

- The ultimate aim is to install LAMP using yum.

- The Apache Spec (httpd.spec) is customized, like the location of the apache installation is /usr/local/apache2 rather than /usr. So I need to compile apache source code using this customized apache spec.

- I need to then install this apache using YUM.

So my understanding is I need to compile apache , then add into yum repository or something like that, so that yum can be used to install apache.

View 4 Replies View Related

Debian Configuration :: Obtain Adobe's Version Of The Flash Player?

May 18, 2011

They have broken something in their download site and it is no longer possible to get the latest flash player in a .deb package by direct download. The FTP site is years out of date. And there is no way to get through the "help' system to contact the people running the web site.

So does some third party offer the latest flash player in a .deb package for download?

View 14 Replies View Related

Debian Configuration :: Installing Wireless From Disk?

Dec 17, 2010

How can I load packages from the cd? I installed from cd1 which I burned on a desktop, then installed Lenny onto a laptop. Works great, no problems except I have no way of connecting the laptop other than wireless.
I've found the network manager package on the cd, but don't have a clue how to install it. I really need to get the wireless working so I can install package manager, wi-fi radar and some other things. I tried putting the disk back in and thought rescue mode might bring me back to where I could select the individual packages I need, but that didn't work, it just wanted to go through another install. Thought there was a way to select individual packages and add them to the installation.

View 4 Replies View Related

Debian Configuration :: Hibernate To Disk Not Restoring

Mar 9, 2011

I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it). (has worked in ubuntu 10.10)I can hibernate, but when I switch on the system cold boots (it does not restore previous session).Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each block of suspend suspend a block of resume suspend, but hibernate hibernate is not followed by resume hibernate ( I assume that is what is expected.)

View 7 Replies View Related

Debian Configuration :: In Grub Disk Changed From Hd0 To Hd1?

Apr 26, 2011

We had a server failure this morning because grub was throwing error 15 (file not found). We discovered that the disk had changed names from hd0,0 to hd1,0. Making the appropriate replacements in menu.lst fixed the problem, but I'm still wondering what could have caused the spontaneous name change.

here are some other possibly related tidbits: * the server had been down because of a power loss, but it is behind a UPS so i doubt there is any electrical damage * eth0 also temporarily failed but the system failed over to eth1

My current theory is that when the bios was configuring the hardware the loss of eth0 shuffled around the addresses of the remaining hardware on the pci bus, which somehow caused the hd0/hd1 confusion. The problem is that everything i've read [URL] says that the drive assignment should be based on the way the disk is connected to the motherboard (which in this case didn't change)

View 2 Replies View Related

Debian Configuration :: /var Disk Space Is Completely Out?

Jul 11, 2011

I have deb6 installed in VMWARE ,i am posting my fstab config file

/dev/mapper/debian-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=0e7bc1e7-4f8c-4dee-a6e9-ae6d0669755e /boot ext2 defaults $
/dev/mapper/debian-home /home ext4 defaults 0 2

[code]....

View 14 Replies View Related

Debian Configuration :: Need Kernel Between 2.6.26 And 2.6.32

Dec 7, 2010

On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?

View 5 Replies View Related

Debian Configuration :: Fastest Partition Scheme Filesystem For Flash Media?

Nov 11, 2010

I thought this might interest someone out there:[URL].. I used SD cards with MBR formatted as ext2 for backup. After I read these articles, I reformatted my cards with GUID Partition Table and ext4 format. Now I make my backup in half the time!

View 2 Replies View Related

Debian Configuration :: LTSP : No Sound With Iceweasel And Flash Plugin On Clients?

Aug 24, 2011

i set up an ltsp server on debian squeeze. after a standard installation, sound doesn't work on clients.

[code]...

when i start iceweasel normally (executed on server side), i get sound on the client. when i start ltsp-localapps iceweasel, i get no sound on flash sites and videos videos.what's wrong ? with local apps, is it possible that the flashplugin-nonfree doesn't talk to alsa ?

View 1 Replies View Related

Debian Configuration :: Hard Disk Won't Stop Spinning Up / Down

Feb 11, 2015

I've bought a new notebook. The hard drive won't stop spinning down and then spinning up again during load. I don't want HD power saving, so I disabled it within

1. /etc/hdparm.conf
Code: Select all# -B apm setting
apm = 255
# -B apm setting when on battery
apm_battery = 255

It didn't work. I can still hear the HD spin up. It's annoying in a video game because things just suddenly stop for a second.

2. /etc/udev/rules.d/50-hdparm.rules

Code: Select allACTION=="add", SUBSYSTEM=="block", KERNEL=="sda", RUN+="/usr/bin/hdparm -B 255 -S 0 /dev/sda"

This was also every tip I could find during RTFM.

Other specs:

Acer Aspire E5-521G-88A8 Notebook
AMD A8-6410 APU
4 GB RAM
AMD Radeon R5 2 GB VRAM
hdparm model number: ST1000LM024 HN-M101MBB

Debian Jessie

View 8 Replies View Related

Debian Configuration :: Jessie WD Disk Mount Fail

Aug 20, 2015

A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.I tried to do it manually in a format that worked on debian 7..Manual mount fails too.

umount My passport
fdisk -l (to see device name)
mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4
dmesg | tail
[ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found
[ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through

[code]....

View 2 Replies View Related

Debian Configuration :: Creating LUKS Encrypted USB Disk

Jan 15, 2016

Is it better to install LUKS to raw disk (/dev/sdb) or disk partition (/dev/sdb1)? What are best LUKS options?

"cryptsetup benchmark" output
Code: Select allPBKDF2-sha1      1310720 iterations per second
PBKDF2-sha256     862315 iterations per second
PBKDF2-sha512     590414 iterations per second

[Code] ....

Is slow hash better or how to choose it? It is clear that aes-xts is best choise. Is 265 bit key good?

View 3 Replies View Related

Debian Configuration :: Data Pool - ZFS Disk Labeling

Jan 31, 2016

I created my data pool using /dev/disk/by-id and things went well. a recent view of zpool status however showed /dev/sdb and /dev/sdc being used instead. how can I be sure a rearrangement of my disks wont cause error?

View 2 Replies View Related

Debian Configuration :: How To Get A Virtual RAID Image Disk

Feb 20, 2016

How can i get a RAID virtual image disk?

What i need is to mount several directories from any other partiton (or file system) as a new merge file system that can grow or decrease depending on the free space. As if it was a dinamic RAID,so i can work with huge files distributed over the partitions mounted.

Ejemp: /mnt/sda1/dir_raid1 + /home/dir_raid2 + /mnt/sda3/dir_raid3 ---> /mnt/RAID/

mhddfs and unionfs <---- are not the solution im searching (cant use huge files)

View 0 Replies View Related

Debian Configuration :: Missing Disk Space / Get It Back?

Feb 19, 2010

I seem to have a major discrepancy between what df reports and what du reports. df tells me that I am using 20G, but I am only able to find 9.5G using du. What follows are the ls -l of root, a df of my system, and the du for every directory in root that is not a symbolic link, mnt, or proc. I would appreciate any suggestions on where to look for the remaining 10.5G that seems to have disappeared.
I am running under VM Player code...

View 3 Replies View Related

Debian Configuration :: Use A Whole Disk Or A Partition In RAID Array?

Aug 31, 2010

concerning Linux, mdadm, and creating RAID Array's in Debian. I've done a lot of reading and research on RAID both on this board and elsewhere (The Linux Documentation Project's Software-RAID HOWTO is especially good), but I've run across something that no one seems to explain, and I'm not sure why. I'm instructed to create partitions on the drives I wish to add to my array. These partitions inevitably take up the whole disk, and are always have their system IDs set to "Linux raid autodetect". What I don't understand is why, after creating these partitions, some guides then go on to create an array (say a RAID5 one) with just the disks themselves as members, while others go on to create the RAID5 array with the previously created partitions as members. E.g.,

mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda /dev/sdb /dev/sdc /dev/sdd
vs.
mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1

What's the advantage of using one over the other?

View 3 Replies View Related

Debian Configuration :: Add New AMD PCI-IDs To Kernel Module

Jul 9, 2015

I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.

Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h

From the 4.1rc1 kernel I know what to patch and where.

Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?

View 6 Replies View Related

Debian Configuration :: Kernel Not Updating To 3.16

Jul 26, 2015

Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.

Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23

What have I missed?

Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)

[Code] .....

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved