CentOS 5 Hardware :: Hp P3005 Laser Printer Gives Me 49FF04 And Fuser Error
Aug 11, 2010
Hp P3005 Laser printer gives 49FF04 error message and 50.2 fuser unit problems. I open my printer, It doesn't receive tray paper. If you give this issue information about my broken piece, on fuser film is torn inside,deformed lower sleeved roller Worn bushing. I will buy a company this spare part on I want to fix my own printer.(Please understand my english is not very good show ) Bilberk Printer-Service-Spare parts [Moderator edited to remove advertising link.]
View 1 Replies
ADVERTISEMENT
Mar 16, 2011
I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies
View Related
Oct 29, 2010
When I check socket on my box (Centos 5.5) I notice a strange behavior:
fuser 80/tcp
fuser -4 80/tcp
fuser -6 80/tcp
don't give me any result. But apache is running!
tcp 0 0 :::80 :::* LISTEN 25960/httpd
View 2 Replies
View Related
Oct 16, 2010
I would like to know how to network a HP P1005 Laser Printer that is connect to my desktop with Windows XP SP3 Home, & as well network files & folders to watch it on Ubuntu on my laptop?
View 4 Replies
View Related
May 16, 2010
I'm looking for a low cost mono laser printer that just works under Ubuntu. I know that a general 'rule of thumb' is go with HP, but that doesn't seem to be the case with their low-end mono printers, as they use the XQX Stream Protocol instead of Postscript. The more expensive HP printers appear to work because they use Postscript.
View 3 Replies
View Related
Sep 24, 2010
I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
View 1 Replies
View Related
Jun 13, 2011
I am using slackware 13 and cups is working OK. i installed the printer HP laser jet 1018 USB printer through localhost:631. it seems installed correctly but when i send test print there is no output.2nd thing i want to share that printer to some other windows machine on network so they can also use that printer
View 2 Replies
View Related
Jan 8, 2010
I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies
View Related
Mar 8, 2011
i am getting problems in order to install my HP laser jet p1006 printer for FC14.
View 15 Replies
View Related
Jan 4, 2010
Can anyone recommend a reliable network laser printer for a small office (it will be used quite often)Actually, it doesn't have to be laser - what's more efficient?Obviously it has to work well with linux.
View 2 Replies
View Related
Oct 18, 2010
Using ubuntu 10.04 a dell 1320 colour laser printer. I have been using a xerox driver for this but it will only printer from the single sheet feeder and no the paper tray. It works fine with XP and windows driver. I know that there is not a dedicated driver for linux but is there one which will work correctly and how do I install it?
View 1 Replies
View Related
Oct 20, 2009
I have Fedora 11 and am trying to install Brother HL-2170W Wireless laser printer. I installed it and used CPUS but cannot print. SELinux is enabled. On Brothers site there is an FAQ about SELinux and CUPS. [URL] I followed these instructions but still cannot print. Jobs get queued. Under Printer properties -> Policies, there is an Enabled checked. For some reason when I check this Enabled box and click Apply, the changes do not take effect. Then Enabled checkbox gets uncheck again.
I cannot even print a test page as its status shows Pending.
View 12 Replies
View Related
Jun 17, 2011
Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.
View 5 Replies
View Related
Dec 4, 2010
LaserJet Pro CP1525NW. HP website mentions that it is compatible with Linux. However, this particular model cannot be found at Linux Foundation's OpenPrinting Database. As you can see here, there is no mention of HP LaserJet Pro CP1525N which makes me worried. Also, the printer is not listed in HP Linux imaging and printing.
What are your thoughts and do you have experience with this printer? What other Color Laser printer do you recommend? The fact that the that printer's specification on HP website says that it is compatible with Linux, yet it is not listed on HPLIP nor in Openprinting makes me nervious.
View 9 Replies
View Related
Feb 4, 2010
Just purchased new del 1320cn printer and unfortunatly ubuntu doesn't see it. I tried the Foomatic system as well, which does see the printer and identifies it but does not show the model number in the list.
Any help would be really good. My other Del 1110 mono laser worked first time!
If any terminal commands reqd, please could you be kind enough to list them as I get confused using terminal.
distro: ubuntu 9.10
Printer: Del 1320cn Colour Laser Printer
View 9 Replies
View Related
Jul 5, 2010
I have a recently purchased Brother HL-3040CN printer that I had been using under Windows XP. I'm hoping to use it on openSUSE 11.2 64-bit. Having consulted SDB:Installing a Printer - openSUSE I ran lpinfo -l -m | grep HL-3040CN as su... evidently this model is not supported.The Brother site Brother Solutions Center : Brother Driver for Linux Distributions seems to suggest maybe there is hope. I am relatively new to Linux.
View 3 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
Mar 31, 2015
I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (
It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)
My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2
The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1
-> ls -R
.:
brcupsconfig Copying filter PPD
[Code] ....
How do I compile and install it on my computer ? ( Or get the printer working ? )
View 7 Replies
View Related
Jun 5, 2010
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies
View Related
Dec 12, 2010
I have tried to mount an HP laser printer on my home network through a VPN IPSES connection from my laptop, but I cannot manage to see the printer or make it accept commands.
View 1 Replies
View Related
Dec 24, 2010
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
View 4 Replies
View Related
Jul 19, 2010
the basic usage of lsof and fuser command in linux
View 1 Replies
View Related
Sep 18, 2009
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
View 3 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Jun 23, 2011
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Mar 7, 2009
I'm looking for a PDF Printer for centos 5.2. I found something on a way to use CUPS for a PDF Printer for linux, but so far only ones I see out there are the (my version centos 5.2, i386) 4.3 i386. Dose any one know a different way to get a PDF Printer for centos. My uses for it is just to turn a website page into a PDF format for offline viewing.
View 7 Replies
View Related
Aug 8, 2009
I did a net install for 5.3 x86_64 and for some reason it seems as though I don't have CUPS installed.
Computer: Dell AMD Server
Version: CentOS 5.3 x86_64 (net install) server
Primary Issue: There is no way to install a printer (seems as though CUPS is not installed) so System> Administration> and there is not Print or Printer option there
Secondary Issue: After figuring out the printer issue, I need to install Apache, and SQLite3
View 4 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
