CentOS 5 Hardware :: Detecting & Installing In 5.3 But Unable To Find Anything

Sep 8, 2009

Whats the best way to detect & install new hardware in CentOS5.3 when you don't have a working network connection. I've tried to search the wiki & forums on this site as well as the supplied help files for help in detecting & installing new hardware but wasn't able to find anything

View 3 Replies


ADVERTISEMENT

General :: Installing Gcc In RHEL5 - Unable To Find Any Rpm

Dec 5, 2010

I currently dont have the cd/dvd of RHEL 5. But i need to install gcc. I have been searching all day but wasnt able to find any rpm that is related to RHEL5. I download the following file

gcc-3.0.4.tar.gz

and extracted it, Then i run the following command

[root@WAN-Admin gcc-3.0.4]# ./configure
Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /root/new/gcc-3.0.4 using "mt-frag"
/tmp/cNf11430/cNf11430.pos: line 7: cc: command not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.

Now i am really hanged as what to do now. I added rpmfusion as my yum repo, i searched rpmpbone.net for gcc file for RHEL5 but it seems its not there for this version.

[Code]....

View 11 Replies View Related

CentOS 5 :: Unable To Boot Windows After Installing CENTOS 5.4

Nov 18, 2009

I've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..

View 1 Replies View Related

CentOS 5 :: Installing RPM - Cannot Find Source Code

Jun 27, 2011

I am trying to install an rpm and when I run rpm -ivvh "package" I get this output
Quote:
Expected size: 29111 = lead(96)+sigs(180)+pad(4)+data(28831) D:
Actual size: 29111 D: ldipmi-8.50.0.i386.rpm: Header SHA1 digest: OK (d3665fbf1c1a418ac1bf17befe92870b95c1a446) D: added binary package [0] D: ============== /root /root: not an rpm package (or package manifest): Is a directory D: found 0 source and 1 binary packages

View 5 Replies View Related

Ubuntu :: Error While Installing 9,10 (unable To Find Medium Containing Live File System)

May 21, 2010

I am trying to install Ubunto 9.10 on my windows XP. I try to run it from the live cd. but every time i try to do this.. I get an error "Unable to find a medium containging live file system" I tried it from different cds too... so it's not an error in the cd.

View 2 Replies View Related

CentOS 5 :: Unable To Find Rpm Tool

May 12, 2009

I wanna uninstall ipp 6.0 and reinstall ipp 5.3 under linux centos 5.3. I'm not able to uninstall ipp 6.0 and I'm getting this error: ERROR: ERROR: Unable to find rpm tool, add its location to your PATH and restart uninstallation

Also, I'm not able to install ipp5.3 and I'm getting the same error ERROR: ERROR: Unable to find rpm tool, please add its location to your PATH and restart installation

View 19 Replies View Related

CentOS 5 :: Unable To Find An Answer To Yum Segfaulting?

May 15, 2010

I have been looking for a while and I am unable to find an answer to yum segfaulting.

I have tried:
yum clean all
rm -f /var/lib/rpm/__*
rpm --rebuilddb

I tried upgrading yum and rpm to the newest versions in 5.5 and I still run into the same problem.

fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741826, len=510}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
access("/var/cache/yum/base/primary.xml.gz.sqlite-journal", F_OK) = -1 ENOENT (No such file or directory)
fstat64(6, {st_mode=S_IFREG|0644, st_size=20480, ...}) = 0

[Code]...

View 9 Replies View Related

CentOS 5 Networking :: ASUS NX1101 And CentOS - Not Detecting

Sep 16, 2009

I have inserted ASUS NX1101 in CentOS. But it not detecting. Card is a new one. What to do?

View 19 Replies View Related

CentOS 5 :: Apache - Unable To Find The Correct Layout?

Mar 21, 2009

What I really want to do is compile an apache version that uses the same layout as the version included with CentOS. I can not however find the correct layout.conf file. The one from the Apache Source doesn't have a REHL or CentOS option.

View 10 Replies View Related

CentOS 5 :: Unable To Find Persistent Overlay Using Temporary

Feb 13, 2010

I am trying to create a LiveUSB with persistent overlay. Here is what I am doing ...

1. I create my own LiveCD image.

# LANG=C livecd-creator --config=centos-livecd-desktop.ks --fslabel=CentOS-5.4-<arch>-LiveCD

2. Insert and format the USB (I'd tested FAT and EXT).

3. Create the filesystem on the USB.

# livecd-iso-to-disk --overlay-size-mb 2500 CentOS-5.4-i686-LiveCD.iso /dev/sda1

4. Test it.

# umount /dev/sda1
# sudo kvm -hda /dev/sda1 -m 256 -vga std

The process seems to be fine but when I boot I receive the message: "Unable to find persistent overlay using temporary" complaining about failing mount /overlay.

If I watch inside LiveOS/ I can find the overlay file: overlay-jimezam_lab-d9d04988-3b00-4a2d-8207-43007ac71ef1.

View 1 Replies View Related

CentOS 5 Hardware :: Why CentOS Not Detecting VMX Extension ?

Dec 22, 2010

I've got brand new Dell Optiplex 380 (Intel E8400 chipset) that I wanted to use to test new KVM virtual environment, after installing Centos 5.5 - (64bit) I'm not getting any further than "egrep '(vmx|svm)'color= always /proc/cpuinfo" as it is not showing that CPU is capable of VMX. Now this URL... says that it is perfectly up to what I want from it. I specifically installed W2k3 server R2 on the same box previously to run these apps, just to be sure URL...everything was nice and green and according Windows and those apps perfectly VMX-capable, but still CentOS isn't recognizing VMX capabilities.BIOS settings are all enabled...

View 4 Replies View Related

Red Hat / Fedora :: Unable To Find /etc/resolve.conf On Centos Machine

Mar 7, 2010

I am not able to find /etc/resolve.conf on my centos machine.it says no such file or dir .with out this file i am not able to connect to internet.when i ping my localhost and my machines ip address i am getting a reply.but when i ping some domain(eg - google.com) i get no reply.i tried manually entering the dns nameserver from system->adminstration->network->dns tab.i dono what ip to enter there..

View 2 Replies View Related

CentOS 5 :: VMWare Unable To Find Kernel Header Modules

Mar 7, 2009

I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages

C header files matching your running kernel were not found

Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel

Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE

Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..

View 6 Replies View Related

CentOS 5 :: Unable To Find The Folder To Install The Support Driver?

Jul 25, 2009

When i put the command: /etc/init.d/vboxdrv setup for install it it say this:

Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
[root@server ~]#
and
the log:
Makefile:185: *** Unable to find the folder to install the support driver to. Stop.

View 4 Replies View Related

CentOS 5 :: Unable To Find Php-pear-Date-Holidays For Horde Web

Nov 18, 2009

I was following these instructions[url] and it asks to have this installed yet I am unable to find the file/package.

yum install -y php-pear-Date-Holidays <-- (for now, this package is available in the EPEL repo)

I have followed the instructions on this link [url]

To install ELRepo for RHEL5, CentOS-5 or SL5:

And

How to get the package iinstall and/or recommended steps for horde

View 1 Replies View Related

CentOS 5 :: Grubby Fatal Error: Unable To Find A Suitable Template

Oct 13, 2009

so I was trying to do sheduled updates on server, which is doing xen virtualization
doing kernel update (to 2.6.18-164.el5xen) i got the following error:

Running Transaction
Installing : kernel-xen [1/1]
grubby fatal error: unable to find a suitable template

and of course new kernel doesn't appears in grub.conf and don't know what is cause of this problem last kernel i was updateting in August and as i remember everything went just fine:

current kernel:
2.6.18-128.4.1.el5xen #1 SMP Tue Aug 4 21:33:24 EDT 2009 i686 i686 i386 GNU/Linux
#cat /boot/grub/grub.conf
# grub.conf generated by anaconda

[code]....

also could it be because running kernel is removed?also could it be because of LABEL entry, not /dev/... ( as i found out it was such bug, some years time ago)

View 1 Replies View Related

Networking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?

Jun 26, 2011

I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.

I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.

I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.

NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7

When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .

View 4 Replies View Related

Debian Installation :: Installing Stretch Stops At Detecting Network Devices

Oct 11, 2015

Installing stretch stops at detecting network devices. This is an attempt to install stretch over the top of Windows 10 on a Toshiba Radius 15 with 2 each USB2 ports and 2 each USB3 ports, and no RJ-45. Its wireless is based upon the Intel 7265. Just before the presentation of the wireless list, the system reports the need to install non-free:

iwlwifi-7265D-9
iwlwifi-7265D-10
iwlwifi-7265D-11
iwlwifi-7265D-12

and asks for media. Whether I respond yes or no, the driver selection screen comes up. [I have not been able to find those four specific files on the Internet.The network card screen comes up, I select the Intel recommended firmware iwlsifi, but the page just recreates itself and waits for a new selection. If I select either 'none' or 'not listed', the installation fails saying there is no network card.I have obtained from Intel their suggestion as of Aug 2015: iwlwifi-7265-ucode-25.30.14.0.tgz.I placed this on a USB stick in a subdirectory labeled 'firmware'. This was built from Windows 7 on a FAT32 file system.

There is also a Dynadock docking station that connects to the Toshiba via a USB3 cable. Besides video, USB,and audio, this has an Ethernet port. I have tried this connected to the laptop but it also requires a driver. I have placed that driver on the firmware directory of the USB also.

Are the four files listed above somehow inside the iwlwifi driver tgz?Is there a way to get the docking station drive to load so I can use its Ethernet port?

I have used Rufus to build the stretch USB from Windows. I do have a a Linux box I built with the same USB. I would use it but so far, I only have a command line on it and I have not figured out how to access debian.org to download the installation files nor how to put that on the stick.

View 14 Replies View Related

CentOS 5 :: Computer Not Detecting New Installation

Sep 23, 2009

I try to install CentOS 5.3 for the first time. The installation of system is completed successfully, but the computer isn't detected the installation of CentOS after rebooting and I have an error Non-System Disk or Disk Error Replace and strike any Key When Ready on starting. Does the hard disk have error and it should replace it? If the hard disk have errors, how the system CentOS could take hold?

View 4 Replies View Related

CentOS 5 Networking :: NIC Card No Detecting / What To Do?

Dec 18, 2010

I have loded centos 5 on vertual machine, my host machine is windows xp and has two NIC cards working perfectly well

1) realtek RTL 8139 family PCI fast eathernet NIC
2) realtek 8169/8110 family gigabite ethernet NIC ( ONBOARD)

but both of them are not getting detected by CENTOS

View 1 Replies View Related

CentOS 5 Server :: Amavisd Not Detecting Viruses?

Feb 8, 2010

I have postfix setup with amavisd and I tried to send myself an email with the eicar file however it lets the email go through to my inbox. When I restart the amavisd service, there are no errors in the log and it finds all the decoders for different file types and I also see this come up:

Feb 8 14:45:44 Mailgate amavis[3116]: Using primary internal av scanner code for ClamAV-clamd
Feb 8 14:45:44 Mailgate amavis[3116]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan

Everything seems to work but it doesn't scan the file for viruses. Also, I've double and triple checked and my amavisd.conf file doesn't have the option enabled to bypass virus scanning.

View 5 Replies View Related

CentOS 5 :: Detecting And Mounting Serial Mouse/trackball?

May 7, 2009

I am attempting to use a serial trackball in CentOS 5.3 and have run out of ideas. The mouse is connected to COM2 (/dev/ttyS1). I have tried to configure it through xorg.conf using every protocol I could find including "auto" and tried the same again using "inputattach". The mouse communicates at 1200 baud, so I've tried using stty to set the port to that baud rate and still no luck. Is there a test tool that can be used to see if the serial connection is functioning? If not, are there any other ideas?

View 1 Replies View Related

CentOS 5 Networking :: 5.3 64bit, ASUS NX1101 Ethernet Not Detecting?

Oct 15, 2009

Cent Os 5.3 64bit dosen't recognise the network card ASUS NX110113f0:1023 (rev41)here are some details about the system,

# lspci | grep ther
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)

[code]....

View 6 Replies View Related

Fedora :: GNOME3 - Unable To Initialize Clutter: Unable To Find Suitable Fbconfig For The GLX Context

Jun 27, 2011

The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:

[Code]....

View 3 Replies View Related

Ubuntu Installation :: Unable To Install Kubuntu 10.4 - Unable To Find A Medium Containing A Live File System

Aug 15, 2010

I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:

BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.

He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:

OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation

[code]....

View 8 Replies View Related

CentOS 5 :: Centos 5.2 Installed On /dev/hda3, Won't Boot, Cant Find Grub Stage 2?

Nov 10, 2009

I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.

I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?

View 2 Replies View Related

CentOS 5 Server :: Cannot Find Mysqld, Safe_mysqld, Mysql_install_db In CentOS 5.1

Apr 2, 2009

I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.

[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql

However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.

[Code]...

View 3 Replies View Related

CentOS 5 Hardware :: Error Installing CentOS 5.2 On ICH7R With 4 SATA HDDs RAID 5?

Feb 15, 2009

The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.

View 3 Replies View Related

Software :: List / Find / Compare The Program Versions On A Centos System Against Redhat / Centos Errata / Security / Bug Lists?

Mar 30, 2011

Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:

[Code]...

View 2 Replies View Related

CentOS 5 Networking :: Find Whether Firmware Is Installed In CentOS 5.4?

Jan 19, 2010

I am trying to get the wireless enabled in my laptop. Following is the dmesg log I get:

ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection

[code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved