CentOS 5 Hardware :: Error Installing CentOS 5.2 On ICH7R With 4 SATA HDDs RAID 5?
Feb 15, 2009
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
I'm working on a new server and it has an Nvidia SATA array controller with 2 250Gb SATA drives configured in a hardware array. When the first screen comes up I'm entering the option Linux DD for it to prompt me for the drivers but nothing ever happens. The screen says that it's loading a SATA driver for about 15 minutes and then the screen clears and has a plus sign cursor on a black screen. What am I doing wrong? The only driver that came with the HP server are for Redhat 4 and 5 and SUSE, will any of those actually work?
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
I need your help urgently. I will shortly install Centos 5 on a HP DL380R05 E5420 Server with two HP 146GB 10k 2.5 SAS HP SP hard disks running hardware RAID-1. I am a newbie on CentOS, please advise me:
1. Do I need a Centos RAID device driver for hardware RAID-1 on the HP DL380R05 E5420 Server? 2. Should I use Centos i386 or Centos x86_64 in this case? Which one: CentOS 5.2 or CentOS 5.3? 3. Does Centos support Embedded NC373i Multifunction Gigabit network cards?
The following is my server's hardware configuration:
HP DL380R05 E5420 2GB Base AP Server(1) Quad-Core Intel Xeon Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C14 Cord RPS Kit
I forced my workplace to forgo windows and opt for linux for web and mail server. I'm setting up Centos 5.4 on it and I ran into a problem. The server machine is a HP Proliant DL120 G5 (quad core processor, 4GB Ram, two SATA drives, 150GB each attached to the hardware RAID Controller on board). RAID is enabled in the BIOS.I pop in the Centos disk and go through the installation process.
When I get to the stage where I partition my hard drive,it is showing one hard drive, not as traditional sda.but as mapper/ddf1_4035305a86a354a45.I looked around and figured that I need to give Centos the raid drivers. I downloaded it from:
[URL]
I follow the instructions and download the aarahci-1.4.17015-1.rhel5.i686.dd.gz file and unzipped it using gunzip. Then on another nix system, i do this:
dd if=aarahci-1.4.17015-1.rhel5.i686.dd of=/dev/sdb bs=1440k Note that I am using a usb floppy drive, hence the sdb. After that, during centos setup, i type: linux updates dd
It asks me where the driver is located. I tell it and the installation continues in the graphical mode. But I still get mapper/ddf1_4035305a86.a354a45 as my drive. I tried to continue to install centos on it. It was successfull but when i do a "df -h" it gives me /dev/mapper/ddf1_4035305a86......a354a45p1 as /boot
/dev/mapper/ddf1_4035305a86......a354a45p2 as / /dev/mapper/ddf1_4035305a86......a354a45p3 as /var /dev/mapper/ddf1_4035305a86......a354a45p4 as /external /dev/mapper/ddf1_4035305a86......a354a45p5 as /swap /dev/mapper/ddf1_4035305a86......a354a45p6 as /home
Well i know why it's giving these, because i set it up that way, but i was hoping it would somehow change to the normal /dev/sda, /dev/sdb. That means that the driver i provided did not work. I have another IBM server (5U) with raid scsi drive and it shows the usual /dev/sda. It also has hardware raid. So i know that there is something wrong with the /dev/mapper/ddf1_4035305a86......a354a45p1 format.
First, is there any way that I can put the aarahci-1.4.17015-1.rhel5.i686.dd (floppy image) on a CD?. I really need to set this up with raid. I know i could simply disable raid in bios and then i would get two normal hard drives sda and sdb. But it has to be a raid setup. Any way to slipstream the driver into the centos dvd? The hp link i provided above, under installation instructions, there are some instructions titled "Important". But I couldn't get it to work.
I tried install Centos 5.2 (i386) on Dell PowerEge 2950 server with SAS RAID disk (RAID 5 on PERC 6/i created from six HDD, 1 TB each). I never installed Centos on a disk over 2 TB. I find out that i need use gpt instead mbr. I tried use rescue mode + parted but after rebooting I got message "Can't boot from from GPT partition" whet tried install. But when the space is partitioned by installer, I can't boot up.I got msg PBR not found. My ask is: "Can I boot directly from GPT partition? If yes how do it?" Or even better "How to install centos 5.2 on disk bigger than 2 TB?"
What are the things that i need to do to be able to install CentOS 5.3 on RAID 1 drive.I have tried to install other OS like Ubuntu 9.10 and lower and they all work fine.Problem is that, during the initial installation, it could not find any drive therefore i could not proceed with the installation.
I'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
Our server is a CybertronPC I2XV9080 Imperium Tower. It is equipped with a supermicro X7DVL-I Motherboard and Quad 750 GB SATA2 RAID edition hard drives in a raid 5 array. We tried to install Centos on the Raid5 array with Device-Mapper as the LVM. In the BIOS SATA Raid was enabled and the ICH RAID code base option was set to [Intel].
Intel Matrix Storage Manager Option ROM V5.6.4.1002 ESB2 RAID ID Name Level Strip Size Status Bootable 0 Raid5 Raid 5 64KB 80GB Normal Yes 1 Raid_5 Raid 5 64kB 2000GB Normal Yes[code].....
Can I have multiple level raids across the same array or would that lead to problems as above? Is the root cause of my problem the fact that intel raid5 is not supported for Linux as based on the following link http:[url]....
Am installing Fedora 10 on an old but good server that used to be a windows box. It has 2 sata disk raid level 1 on adaptec 2410SA card. Disks are clean no info even did a low level format and recreated RAID.. twice DVD boots and installs os on raid array and reports success. new volume appears under computer icon but cannot be mounted after reboot attempt reports Reading physical volumes. This may take a while... (it doesn't)
Volume group "VolGroup00" not found Unable to acces resume device (/dev/VolGroup00/LogVol01) mount: error mounting /dev/root on /ysroot as ext3: No such file or directory input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
and then a blinking cursor with keyboard echo but its just copying reboot with install DVD does not show previous (unmountable) disk image and repeat of above process increases operator need for alcohol have "disable write cache for drives" as I found that is a post but after fedora install.I do not know what grub is for instance but once linux is booted (on other computers) I can muddle through ok in terminal mode.
I am having problems seeing SAS drives using Supermicro AOC-SAS2LP-H8IR adapter. The operation system is CentOS 5.6 64bit version. The operation system is installed on a SATA drive and the motherboard is an Intel Board "Classic Series" "Rockfish" G43 - Socket LGA775. From the OS I cannot see the drives. BIOS does see the PCI card and it ends there.
Currently, I installed CentOS 5.4 into 2 HDDs in my PC. I have bought a larger capacity HDD and would like to clone/image everything over and retain my settings and preferences. How can I do it?
I'm having an issue with formatting the HDDs during the CentOS 5.5 installation.I've set up a hardware RAID1 with 2TB HDDs using FastTrack TX4650 (http:url... as a RAID controller.Then I tried to install CentOS 5.5 32-bit version using this configuration. I preloaded the required RAID drivers for the CentOS and started the installation. Everything went fine until the part where the CentOS formats the HDD - it took 12 hours and the process still goes on. I cannot determine whether the install process is stuck or the HDD is still being formatted.how long the formatting should take considering the above mentioned configuration?
I have just configure RAID 1 on my IBM X3400 Server in CENTOS 5 ..Partition information is md0 boot , md1 swap and md2 is root ....but after resyn when i run cat /proc/mdstat I realize that md0 and md1 is ok and present with [UU] status. BUT the md2 is showing on one [U_].. that means my root partition is not properly in RAID 1.. how can i make it active in both drive. Or i need to reinstall complete system again. Screen shot attached [URL]
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
I'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
I've installed debian squeezy recently and for some reason I have problems with mounting /home partition during startup.
There's an error:Mounting local filesystems...mount: special device /dev/mapper/isw_bbfedcffgi_Volume0p6 does not exist. failed
I've tried using fsck - no result the file system is healthy, I've tried formatting it once again (fresh copy, no user data) and it's not working. What is more mounting the partition manually goes well - I can read the data and write to it. All other partitions are ok.
I have no idea what's going on and why mounting /home fails. I've written this post on Polish debian users forum, but no response - only to give more info, so I'll put it here also:
ls -al /dev/mapper
crw------- 1 root root 10, 59 Nov 9 19:34 control lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume0 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume01 -> ../dm-2 lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume05 -> ../dm-3 lrwxrwxrwx 1 root root 7 Nov 9 19:34 isw_bbfedcffgi_Volume06 -> ../dm-4 code....
I have DELL R310 server with PERC 200H controller and RAID 5 configured already.This is my first time I want to install CentOS and seems like a new challenge for me I've read some articles on Wiki and posts on this forum and didn't find any information how to install CentOS on RAID 5.I only noticed that if there is fake or software RAID1 it should be switched off and made by OS configuration.I think PERC 200H is separate controller so RAID 5 is hardware RAID, is there anybody who can confirm ?My problem is that when I try to install CentOS it doesn't see any hard disks ... I looked for drivers on DELL web site and there is driver for Red Hat 6. I tried to install it using linux dd command but it doesn't recognize. Is there anybody else who met such problem ?
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
im new in cent desktop i wanna install a powerfull mediaplayer like VLC i search for installing guide but the all told about RPMFusion i wanna install it but i see an error Missing Dependency: system-release >= 11 is needed by package rpmfusion-free-release-11-2.noarch (/home/Arash/Desktop/rpmfusion-free-release-stable.noarch.rpm)
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
I was trying to install Munin on my CentOS VPS via yum, but it showed a few "Missing Dependency" errors which prevented the installation to work. I'm pretty sure all the required Perl packages listed on this page are installed on my server(went through the list one by one using cpan), couldn't figure out what's the issue.
I was trying installing teamviewer on a CentOS 5.5 machine and received the following error:
# rpm -ivh teamviewer_linux.rpm error: Failed dependencies: libasound.so.2 is needed by teamviewer6-6.0.9224-1.i386 libc.so.6 is needed by teamviewer6-6.0.9224-1.i386 libc.so.6(GLIBC_2.0) is needed by teamviewer6-6.0.9224-1.i386 libc.so.6(GLIBC_2.1) is needed by teamviewer6-6.0.9224-1.i386 libc.so.6(GLIBC_2.1.2) is needed by teamviewer6-6.0.9224-1.i386 libc.so.6(GLIBC_2.1.3) is needed by teamviewer6-6.0.9224-1.i386 libc.so.6(GLIBC_2.2) is needed by teamviewer6-6.0.9224-1.i386 .....
