I am using CentOS 5 and have Jasper Reports installed and working with Apache ANT and Java JDK. Everything is building/running successfully, but when I do an "ant pdf" on one of the sample reports, it says "pdf BUILD SUCCESSFUL", but I can't find where it outputted to! I have tried the find command on everything under my /home/ directory.
View 1 RepliesToday i download cheops source code and when i type ./configure returns me this error :
Quote:
checking for gnome-config... no checking for gnomeConf.sh file in /usr/local/lib... not found configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install Is there any way to install cheops in KDE ? Do you know any solution for this problem ?
I'm trying to dynamically write command section stubs with a pre-script to be included via %include. The simplest of these contains the disk partitioning commands. Following the canonical examples,[URL].. for one, of this found in every source of documentation for RHEL/Fedora variants does not work. Anaconda attempts to prompt for interaction to get the partitioning scheme and a cmdline install stops with "In interactive mode parttype, can't continue". I've stripped things down to the following two cases:
%pre
cp /mnt/source/disks-ks.cfg /tmp/
%include /tmp/disks-ks.cfg
%post
[Code]...
I am using awstats for my website report . but last 3 days i am not using awstats . now i check awstats,, when i give updatenow then it only shows todays report , we cant find last 3 days report.
View 1 Replies View RelatedHow to solve this conlifts, only pass in x86_64 and fedora 11?
--> jasper-libs conflicts with jasper
Error: jasper-libs conflicts with jasper
I got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
I have an rsync server and am now setting up cwrsync on my windows machine. I want to be able to run cwrsync over ssh with public private keys. I followed a tutorial over here to set this up. It, however, still prompts me for server password and works only if I provide the password. For some reason the public/private key process is not working.
- I generated a key using the command: ssh-keygen -t rsa -N '' (I verified the key gets generated on my Windows machine)
- I uploaded the generated file id_rsa.pub to server /root/.ssh/authorized_keys
I am also prompted for a password if from command prompt I run this command to log into server: ssh -i c:docume~1user.sshid_rsa root@<server_ip_address> On server I have changed the configuration file (/etc/ssh/ssh_config) to say:
RSAAuthentication yes
PubkeyAuthentication yes
I then restarted the sshd service, however, to no avail.
I occasionally see messages in my logwatch report then cannot find the actual log entry. Is there any way I can have logwatch give a clearer report?an example:
vsftpd:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=a-specific-user
[code]....
When I installed Cent before I got my logwatch messages sent to me. for somreason this new server I built I am not getting them. can mail off the server and there is no mail in the Q or in root. I also put in a .forward file in my root to mail to my external account and it works fine. I get mail from fail2ban and denyhosts but not the logwatch.Thoughts on what I could be missing? I check the link and the files are all there. I changed the config file to give me a High level of detail. Thats about it. If I use the command line for logwatch it sends mail fine. logwatch --detail high --logfile messages --mailto yourname@domain.com
View 6 Replies View RelatedFirefox 3.1 beta 3 won't load. When I open the application, the little bouncy icon bounces, and the task manager shows "Firefox Web Browser", but this only stays this way for about 15 seconds then just goes away. No error or anything.
I've had this identical problem when I try to open certain programs with Wine too. Is there some place I can find a detailed error report on these failures?
I've got an odd one, running the CentOS 5.3 kernel, I'm experiencing lost packets on one of the two NICs when tested with ping. In this particular case, it's the internal NIC that causes the problem, pings from the CentOS machine to the public network over the external NIC never loses packets.(internet)<-->CentOS<--> (LAN) <--> desktop
- CentOS can ping the internet with no packet loss
- CentOS loses packets when pinging the desktop(s)
- Desktops lose packets when pinging the CentOS box
- Taking the LAN switch out of the equation still results in lost packets
- When the LAN NIC on the CentOS box "acts up", all desktops start losing packets
I've swapped out the NIC a few times for different makes/models, and I'm still getting lost packets to/from the internal network. So, I'm thinking that there's something squirrely going on higher up in the network stack. But evidently, not enough to log anything to the console or into the log files.At the moment, I'm leaning towards it being an issue with the nForce 750a SLI chipset. But it's odd that it only affects the LAN card and not the WAN card. I've even swapped the positions of the two NICs, and the problem persists on the LAN card.The other possibility is that iptables is eating packets silently, but in a random fashion.
Every time I selected addons and Mysql i got a notice of a bug report. So i gave in and only selected server and it is installing. I hope i can read enough to get it installed..
View 1 Replies View RelatedI am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies View RelatedI set up a DNS server, and it works fine when being queried from other hosts.But if I query it from localhost (by using nslookup), it reports error:
======================================
** server can't find www.example.com: NXDOMAIN
======================================
[code]....
I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
I am trying to get the wireless enabled in my laptop. Following is the dmesg log I get:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[code]....
Where can I find a bunch of GDM theme RPM's for CentOS 5.4? All my efforts at Googling only results in Ubuntu (.deb) themes.
View 4 Replies View RelatedWhen I build my software with rpmbuild command, the rpms are not gettinggenerated in the directory specified in rpmmacros file(%_rpmdir)This is what I am doing..
rpmbuild -bb -vv --buildroot <build root path> --target=x86_64 --rcfile /tmp/rpmrc /tmp/mySpecfile.spec
# cat /tmp/rpmrc
[code]....
I am sitting here at my computer at 2:30am on a saturday morning with no idea what the hell im doing. But here's my goal I have a KML File for Google Earth. This file is generated with the GPS locations of certain sites.
I have a text file with extra information about certain sites. What i'm trying to figure out how to do is by using perl I want to open the text file grab the first location on line one and search for it in the KML file. When that line is found I want to edit the Description field in that KML file and add something to the description and change the placemark from Yellow to Blue.
Can anyone give me advice on the best way to handle this and where I can start. I can understand if nobody wants to give me the answer directly but I would like to be pointed in the right direction
I wanted to get the ORACLE_HOME of the listener's running on the server.I have been using the following to get the reult. /opt/oracle/admin/PHYPE/bdump> ps -ef|grep /bin/tnslsnr|grep -v grep|awk '{print $9}'
Result is as follows
/opt/oracle/product/10.2/bin/tnslsnr
/opt/oracle/product/9.2.0/bin/tnslsnr
/opt/oracle/product/10.2/bin/tnslsnr
/opt/oracle/product/10.2/bin/tnslsnr
/opt/oracle/product/9.2.0/bin/tnslsnr
/opt/oracle/product/10.2/bin/tnslsnr
Now i wanted to cut the /bin/tnslsnr part and the remaining should write to the file.
I write my courses with Latex and I used Kdvi to read them. Since there is Okular the rendreing is very bad and I have to use back xdvi which works perfectly but is less friendly. I have no problem with pdf files. Did somebody exprience the same thing? How is it possible to solve it? I forgot to say that the problem occurs with opensuse 11.2, 11.2 and I've updated to the last version of Okular
View 6 Replies View RelatedI configured SuSEfirewall2 with no open ports on a openSUSE 11.1 box.
When I list firewall rules (iptables -L -n) the first rules in the INPUT chain are
Code:
2nd and 3rd rules are ok, allowing outbound requests. But how about the first rule? To me it looks like it accepts anything incoming hands down. I can't believe it, do I read this right? In such case the first rule short-circuits all subsequent rules on this chain.
My requirement was to direct certain traffic from various ports down different Internet connections. Basically, for locally generated packets, the OUTPUT chain in the mangle tables is used. You can MARK packets in this chain for ip rule processing.Now the "clear as mud" part. There must be a valid routing decision made without the fwmark, selecting the right source address, even if the gateway ip is invalid.
View 2 Replies View RelatedI am running redhat ent linux 3.0 with oracle database . Recently , I got a problem,perhaps some temporary files are created automatically and occupied my HDD . But I cannot find which files are created autamatically . Is there any way or any os related log file so that I can find that which files are generated automatically OR how can I trace it from OS perspective? I have to check oracle related tmp,trace and log file in every folder.
View 1 Replies View Relatedwhile loading the generated lib file to tcl module i got following as belowi know it is searching for "Tcl_DecrRefCount()" method please tell me the library name where above method is defined..!orif anything bad in my program
[root@localhost swig]# tclsh
% load ./example.so example
couldn't load file "./example.so": ./example.so: undefined symbol: Tcl_DecrRefCount
[code]....
I want to write a program in C which will generate a maze randomly and find the solution for it ..
The idea behind is in [url]
How the 16 bit integer is stored in a variable...Earlier I wrote a program on trees and displayed it using dotty...Is there any such tool to display a maze...I am using ubuntu 10.04
And it was under Slackware64 13.0 and 13.1.Due to other issues with the 13.1 to 13.37 upgrade, I ended up performing a clean install so I don't think that this is due to leftover cruft.
View 4 Replies View RelatedI have been receiving K3b burning problems for the last two weeks. When I burn a m3u playlist generated from Banshee I receive an error about not having permission, but I believe I've enabled all the permissions I know how. Just now I attempted to burn a downloaded ISO and received an error even though I think the filesystem may have built correctly:
Code: cdrecord returned an unknown error (code 254). Sometimes using TAO writing mode solves this issue.
here's my debug report: SUSE Paste