Debian :: Tool For Squid Reports (not SARG) - Generate Less Amount Of Files - Optimal Is To Save Reports To The Database
May 9, 2011
I got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
View 1 Replies
ADVERTISEMENT
May 6, 2010
I work for a not for profit research organisation that works in the clinical sector. Currently I create summary reports for each of our studies that are then made available through our website. These reports are generated from data that is stored in a MYSQL database residing on a RHL Enterprise server. The data analysis however is performed using Microsoft Excel and then I use excel to create the final report pages, which are finally PDF'd.
This approach has served me well however I am currently working to port the data analysis to R and have the analysis performed on the server side. Now I have to consider how to generate reports. Here is my question. Could anyone recommend software that I could use to prepare and review reports generated directly from the data residing in the MYSQL database? I have no experience with this area as my background is in microbiology.
View 1 Replies
View Related
Apr 7, 2011
how to report the sarg with host name??
View 1 Replies
View Related
Jul 21, 2009
SARG seems ok but it is not generating any reports.... "Now generating Sarg report from Squid log file /var/log/squid/access.log squid and all rotated versions .... Sarg finished, but no report was generated. See the output above for details. There is also no view generated reports too.
View 1 Replies
View Related
Jun 9, 2010
how can i exclude specific ip frm sarg reports? i have done with exclude_hosts but still it is not working, any one have solution on this?
View 1 Replies
View Related
Jul 23, 2010
I would like to ask if there's a program that can archive all emails from my employees to a certain server and can generate reports. specifically all types of emails incoming and outgoing. My employees are aware of my policy due to many confidential files within our office.
View 1 Replies
View Related
Mar 4, 2010
I have squid running perfectly and I added MySQL Squid Access Report 2.1.4 and the reports works just fine. The problem its when I add a dansguardian content filter, from that moment the only IP address that appears on the report its the box itself (I have all running on the same box).
IPtables forward requests to port 8080 Dansguardian listening on port 8080 forwards to squid on port 3128 Squid on port 3128 to internet (Here I review the logs with MySar).
I know it is because the actual http request for Squid came from Dansguardian's IP address (its the job of the proxy). how to have the real IP address on the reports.
View 1 Replies
View Related
Feb 6, 2010
I am having squid proxy server running on OpenSuSe 10.2 I noticed when I generate report it just shows me last date log file.Although /var/log/squid contains logs of all previous dates.I really cant remember which file to modify so that I can see all dates reports in html when I use following command Quote: cat access.log | /home/user/squint-0.3.10/squint.pl /home/user/report<date>
View 9 Replies
View Related
Nov 30, 2010
i have just install Sarg-2.2.3.1.tar.gz but When finished compiled i cannot see sarg.conf (in directory /etc/.. or /etc/httpd/conf.d). May i know where is it.?? I'm not sure compiler which it's work good or not good. Some logs show in here:
Quote:
[root@proxy sarg-2.2.3.1]# make install
cp sarg /usr/bin/sarg
chmod 755 /usr/bin/sarg
cp sarg.1 /usr/local/man/man1/sarg.1
chmod 755 /usr/local/man/man1/sarg.1
[Code]...
View 2 Replies
View Related
May 26, 2010
In my fstab I have this entry to connect to my NAS box:
Code:
//192.168.0.1/share /mnt/share cifs username=user,password=******,auto 0 0.For a while it was connecting on startup with no problem (it connects via wifi). But now when I navigate to the directory there is nothing there. However if I run mount it reports this:
[Code]...
View 1 Replies
View Related
Apr 23, 2015
I'm using debian wheezy and i managed to install libreoffice 4.3.3.2 from debian wheezy backports.
The LO program works fine, except that i can't use reports in LO Base. When I'm trying to use a report file that already exists in a base file, i'm getting the message "loading component library <file:///usr/lib/libreoffice/program/librptlo.so> failed.
What should i do to make reports work;
View 1 Replies
View Related
Jun 16, 2011
I just installed AMD catalyst 11.6 version and in the Catalyst Control Center in the Information tab says it's 11.5 (the previous version). What's more weird is that I had to completely uninstall the 11.5 version (with --force option) because the installer complained that something changed to the previous installation and it couldn't proceed automatically. It should therefor not be any remains from 11.5 version installed at all to mess up the new installation. So what version of the driver do I have? (I use the run script from the official AMD site if that is relevant)
View 4 Replies
View Related
Jan 19, 2010
I try using xine to play AVI files, but it reports a codec missing while mplayer plays it just fine. I use F11 with all the latest updates.
View 4 Replies
View Related
May 3, 2011
Mounted second hard disk still report 0 bytes even when files are already deleted in rhel5 . I already checked the lost+found and trash . It only happen that disk space on deleted files cannot be recovered after the disk reach full capacity , but if it does not reach yet its full capacity , deleting files will recover the disk space . The format of the disk I have mounted is ext3 also have tried ntfs using fuse but the same problem , once allowed to reach 0 bytes I can no longer recover space with deleting files and had to reformat and restore the backup
View 4 Replies
View Related
Dec 9, 2010
I´m pretty new to linux and debian and I have a problem with my disk setup. I have a rocketRAID hardware card installed for RAID setup. In addition I have a separate HDD for linux and use the RAID-setup for server purposes. Now, when I boot the system, grub boots /dev/sda1. This does not work and I have to change to /dev/sdb1 for it to find the system files. (although sometimes it works, but in these cases the system does not find the RAID-disks. That´s for another time thou).
The strange thing about this, to me in any case, is that "fdisk" reports correctly, with sda and sdb but "df" reports all disks as sda and none as sdb. It also misses a partition of the RAID-disks which fdisk reports. here´s a screengrab from "fdisk -l" and "df -h"
[Code]...
View 2 Replies
View Related
Nov 14, 2015
I am running Wheezy 7.9 (32 bit) and using Gnome Classic desktop. I have recently had several issues with system "crashes" and such, see some of my recent posts, and for now things seem to be working okay. As part of my attempts to "fix" the problems I looked at the hard drive using the SMART disk utility, and also ran "smartctl". The SMART utility reports that there are 3 bad sectors on the drive. When I run fsck, from a live CD, it does not report finding bad sectors. So why would fsck not find something that is reported by smartctl? Which one should I believe?
As a precaution I am now making daily backups of my /home directory and purchased a new HD just in case. Have not yet installed the new HD but at least I am prepared.
View 10 Replies
View Related
Jul 29, 2010
I am having issues trying to compile the alsa-linuxtant module and I am getting errors about not being able to find some files and the source needing to be reconfigured. Anyway the developers told me to try compiling on a pristine source to see if I could compile that way. When I went looking at kernel.org I did not find a 2.6.32-5 version. So I did some checking and to see just what version I have.
$ uname -r
2.6.32-5-amd64
$ dpkg --list | grep linux-image
ii linux-image-2.6-amd 64 2.6.32+27 Linux 2.6 for 64-bit PCs (meta-package)
ii linux-image-2.6.26-2-amd64 2.6.26-24 Linux 2.6.26 image on AMD64
ii linux-image-2.6.32-5-amd64 2.6.32-15 Linux 2.6.32 for 64-bit PCs
So the actual package that is installed is 2.6.32-15 but uname -r reports 2.6.32-5 as the kernel version.
View 11 Replies
View Related
Feb 4, 2016
I am having a rather odd issue, this week I installed Debian latest on to an old Acer Aspire 3810TZ; everything runs smoothly enough and I spent a good number of hours using the laptop on battery (about two or three, the battery is checked and in good enough condition given its age) then as the desktop widget reported the battery as being 22% or so full I decided to plug in the charger at which point the os reported the battery as being 0% and issued an immediate hibernation.
I have done a fair bit of searching for others whom have had the same problem, as I am sure its not a new one. But the majority of what I have read revolves around batteries not charging and mine certainly does, I just have to have the laptop switched off while I do so (unless its booted into windows, in which case its fine.)
Below is the output of acpi and upower.
Code: Select allsimon@DLC:~$ acpi -b
Battery 0: Discharging, 96%, 05:47:01 remaining
simon@DLC:~$ upower -d
Device: /org/freedesktop/UPower/devices/line_power_ADP1
 native-path:     ADP1
 power supply:     yes
[Code] ....
I am using the Cinnamon desktop environment ...
View 0 Replies
View Related
Jul 23, 2010
I am getting an error when i generat a report with squid's report generator ( sarg )is there a tool or way that i can find where in the log file the error is, the log file is 61442 lines, and it's gonna take me forever to find the error,
View 1 Replies
View Related
Feb 13, 2011
I love to submit all bugs as I know the importance that this can play for further development. When I click on Bugzilla it allows me to write information etc and I even sign in with my forum id (I know it is not necessarily correct) but I didn't know what else to do and thought it would work. When I sign in it does not reject me until the very final step of the bu reporting process.My question to anyone is how can I get my bug reports to be accepted or how can I sign in to this area of Fedora if required?
View 2 Replies
View Related
Mar 8, 2010
How to configure SARG to monitor SQUID?
View 1 Replies
View Related
Oct 6, 2010
i have a Archlinux PC working Squid like proxy server and SARG for read the access log from Squid. The Squid log only show me 192.168.0.0 making http request, i need show the local IP from each PC on my network. I read in other page i need rebuid squid with follow_x_forwarded option, how i can do that? exist other way ti do that?
View 1 Replies
View Related
Feb 13, 2011
I've mounted /home on its own 26 GB partition. I have 2.6 GB of files in /home/chris/. The only other thing in /home is /home/lost+found/ which appears to be empty. Nautilus reports that there is 1.7 GB free. Where is the rest of my disc?
View 4 Replies
View Related
Mar 24, 2011
I'm trying to install pg_config so I can get some simple reports regarding my PostgreSQL 8.4.7 installation.
I downloaded pg_config and its dependencies and tried to install them with the package installer, but it wouldn't go because it seems like something may be wrong with the libkrb5-3 and libkrb5support0 packages - they won't install and the package installer just zips through without reporting missing dependencies or anything. The MD5, SHA1, and SHA256 checksums all match, but they just won't install.
I downloaded all the packages from the ubuntu [security] repository.
Because my Ubuntu 10.04 (Lucid) machine is not connected to the internet, I download packages to my Windows 7 machine, transfer them across my network to a shared folder on my Ubuntu machine and double-click the package to install.
I've successfully installed postgresql-8.4, apache-2.2.14, php-5.3.2, drupal-6.16, and several other packages and all their dependencies this way without any problems before.
To make sure I wasn't having some new problem, I then tried installing libk5crypto3 - it installed fine.
I sent an email to frank@lichtenheld.de , the repository maintainer, but haven't heard back from him yet.
View 1 Replies
View Related
Apr 10, 2010
I've installed Logwatch 7.3.6 via the rpm on my CentOS 5.4 server. The issue is I'm getting basically empty reports from logwatch. The only two sections which have any information are samba and diskspace.
The only default options in the config file I've modified are: Code: print = No output = html I'm suspecting the issue has to do with the fact that the as-logged host name doesn't match my current host name. However, I've tried manually changing this on a few entries so they match but they didn't show up in the report. According to the config file, the default for option HostLimit is "No" -- so Logwatch should not care what hostname it sees in a log file, right?
View 1 Replies
View Related
Apr 16, 2010
I have one laptop running under Windows and another under Linux. I can access and surf the internet on both computers. But the Linux laptop is painfully slow.
If I ping my gateway the Windows lappy does in in 1 ms but the Linux in 20ms. iwconfig reports errors under Rx invalid crypt, tx excessive retries and huge numbers under invalid misc, and nothing on the rest.
The router is encrypted with WEP and iwconfig reports the correct key.
View 8 Replies
View Related
Oct 23, 2010
I'm trying to install the dependency, webkit, for Handbrake. It gave me this error:
[Code]...
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GLIB_CFLAGS and GLIB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. So I downloaded and installed glib 2.26.0. I ran ldconfig manually, tried rebooting the computer. I tried uninstalling and reinstalling glib, but it still gives me this error above.
View 1 Replies
View Related
Aug 31, 2010
When I installed Cent before I got my logwatch messages sent to me. for somreason this new server I built I am not getting them. can mail off the server and there is no mail in the Q or in root. I also put in a .forward file in my root to mail to my external account and it works fine. I get mail from fail2ban and denyhosts but not the logwatch.Thoughts on what I could be missing? I check the link and the files are all there. I changed the config file to give me a High level of detail. Thats about it. If I use the command line for logwatch it sends mail fine. logwatch --detail high --logfile messages --mailto yourname@domain.com
View 6 Replies
View Related
Sep 19, 2010
I recently had three problems with SELinux: httpd_unify - SELinux prevented my web server from having write access. ftp_home_dir - SELinux prevented my virtual users from connecting to their home directory. textrel_shlib_t - SELinux prevented two separate Unreal Tournament 2.5 mods from running. The troubleshooter did not notify me of any of these problems. I finally figured out how to fix them on my own and did. CentOS had a very concise, albeit excessive SELinux troubleshooter that involved notifying you of every single problem on your server multiple times. Still, I would rather be spammed with notifications than receive none at all.
If I had not switched from a CentOS box, I would not know the chcon command to set textrel_shlib_t to my mods, as I cannot do it in the SELinux Administration without making it global. How do I fix the troubleshooter to report?
View 4 Replies
View Related
Nov 5, 2010
File create archive etc etc
OR
R-Click Add
OR
R-Click Convert
All operation result in a seperate window displaying the progress of the compression but with an error.
Error 127, cannot execute requested operation.
Then when the progress bar reaches full it resets and then resets again continuing the same loop with it becoming slower with every repetition. There is no information posted in the report log of the window. Except that the task has started.
I'm trying to simply archive a file and password protect it. This shouldent be such a difficult task.
P7zip also gives me its own set of errors when archiving.
View 1 Replies
View Related
