When I installed CentOS on a 64 bit machine, I selected the 64 bit option. However, for some reason it installed many i386 packages - these were exact duplicates of installed x86_64 packages.Is this typical? How do I prevent this on future installs? If I left them installed, could this have caused a problem in the future? Due to my fastidious nature, I used yum extender to uncheck every duplicate i386 package and uninstalled them. This took some time. I am still not proficient with yum directly so I am wondering if there is a command to uninstall all i386 packages quickly.
Installing f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.
The output of package-cleanup --dupes is not very helpful:
Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:
Code:
Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386
I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
I have a PXE/kickstart installation system running ok. I would like to build a custom installation x86_64 .iso with the i386 .rpms removed. Currently I install from the standard x86_64 iso, then go and remove the i386 rpm's with all the attendant problems and impact on docs etc. Has anybody tried this? Is it as simple as just deleting *i386.rpm and then building another .iso from the resultant installation tree?
I have a centos server x86_64 arch installed - i am getting some issues where i want to update rpms but because there is a equivliant i386 package installed i get dependency errors.Is it safe to run this command to remove all i386 packages - will my system still boot after this yum remove *.i?86
I keep getting a notice that "Updates Available" for the package syslinux-3.86-3.i386 updates syslinux-3.11-4.i386. But when I try to do that I am met with a dependency for perl-Crypt-PasswdMD5-1.3-1.2.1 which is followed by the error: Public key for syslinux-3.86-3.i386.rpm is not installed
I am having issues installing nagios-plugins using yum. Been using Suse don't have much experience with CentOS (CentOS release 5.2 (Final), ) Linux hoster 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 athlon i386 GNU/Linux It says
"Error: Missing Dependency: perl(Net::SNMP) is needed by package nagios-plugins" Whereas net-snmp-perl.i386 is already installed. yum deplist nagios-plugins Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile
Maybe this should be asked on the hplip website somewhere but I will ask it here. I am running CentOS 5.3 x86_64. The latest rpm version of hplip which I can find, and which is installed, is 1.67 but I need at least version 2.84 of hplip for my printer, an OfficeJet j6480.
Has anyone installed hplip version 2.84 or later for an x86_64 system ? Do either the hplip-2.8.4.run or hplip-2.8.4.tar.gz installation methods install hplip 2.84 for an x86_64 system, as opposed to just an x86 system ? Has anyone produced on he web somewhere a 2.84 or later hplip rpm for x86_64 that I can use rather try to figure out how to do it myself ?
i`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
I want to build deb packages for two versions of same product that can be installed on the machine simultaneously. The source folder structure for both the packages have a common folder needed by both the versions. So i need to keep the common folder till both the versions are removed from the machine.My problem is that i can't install both the versions at the same time, i.e i have to uninstall the installed version and then install the other version. After installing one version, if i try to install another version, an overwrite error comes up. is there any option in dpkg for overwrite? Or is there any way to partially uninstall a deb package?
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386 -libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
I plan to install Fedora on my laptop. But I just confuse which one is right for me. My laptop is Dell Latitude E6420 (ODM CTO) Intel(R) Core(TM) i7-2620M (2.7GHz, 4M cache) with Turbo Boost Technology With 6 GB Ram
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
When configure packages bundled with CentOS, I have difficulty locating the installed directories. Anyway to locate those? I first worked on MySQL and now Firefox. They are not at the standard locations (or the ones refered in the manuals).
How can I figure out where the files are installed? I am currently trying figure out where the mysql include / header files are. I need to install a package and I need to pass parameter --with-mysql=/directory/to/includes
i am sort of a n00b at *nix, and i wanted to install KSB26 on my centos 5.3 install.I downloaded the file. and extracted it.I modified the install.sh in the file to point to /usr/src/kernels/.I run the installation, but it shows many errors telling me to run make oldconfig and make prepare on the src.I run that but i still get the same error and installtion does not occur.Do i need any special packages installed?
I would like to know what packages are currently installed in my linux machine. My machine is running CentOS 5.4. There is no GUI. All I have is command line interface.
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
I am trying to use the ksctp on CentOS 5 newly installed machine. However, I am not able to find some files (/usr/include/netinet/sctp/h, libsctp.so etc.,) that are required for compiling my application.
Ok so I am doing a fresh install of 5.3 .... At the begning of the install after i get into it a get a screen that says "What type of media contais the packages to be installed?" with options... Local CDROM, HD, NFS Imahes, FTP, HTTP.I have a LG GH22NP20 that installed 5.2 fine on the system..... And can load the cd....?>
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
I just installed VMware server 2.02 on a CentOS 5.4 machine. I tried to run 'vmware': it starts via my web browser (firefox) with xdg-open. Then, firefox displays this:
Connection Interrupted
The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. try again.
OS : Oracle Enter Prise Linux 6 (equivalent to RedHat)
I am in process to install oracle 10g on said OS.My process fails and after digging up , I came to know that some of the oracle libraries are compiled on 32-bit architecture and it require glibc-32 bit . also it require for gcc-32 bit.
Now i have downloaded all the required rpm for gcc-32bit . when I try to install glibc and its dependencies , it gives me error that newer version already exist.
How can I install , Gcc-32bit(libgc, libstd-i386 etc) in parallel or standalone?
