Just finished downloading the CentOS5.5 x86_64 DVD images (2 ISO's), and realize that I have almost run out of DVD-R's. First ISO is a perfect fit for the 4.7GB DVD, the second only is ~400MB. Wondering if there may be any issue if I burn the second one to a CD (which I have plenty). I guess it should be okay, but wanted to double-check.
View 2 RepliesCan you please let me know how to burn and iso image in my home directory to a DVD?
View 5 Replies View RelatedI downloaded a live cd iso image from factory but can't get it to burn.
Code:
laptop:/downloads # dd if=./openSUSE-KDE-LiveCD-x86_64-Build0416-Media.iso of=/dev/sr0 bs=4K
dd: opening `/dev/sr0': Read-only file system
[code]....
Ubuntu 9.10 here.
I'm trying to preserve my DVD collection, so I want to use DVD backups instead of the originals. I did the following:
Code:
$ dd if=/dev/sr0 of=FightClub.iso bs=2048 conv=notrunc
$ ls -l FightClub.iso
-rw-r--r-- 1 rdl rdl 8039299072 2010-02-10 09:55 FightClub.iso
[Code]....
I tried brasero and k3b, but, after burning, I cannot read the disks on my PC or DVD player...
Why can't I burn image with k3b After I' ve tried to burn it it says: "Completed succesfully". But when I then check my DVD, there's absolutely NOTHING on it... and there it says:"0 Objects"It seems like it has only got a new label.And burning an image should else be one of the most easy things in life...And it SEEMS very easy when reading a tutorial.
View 2 Replies View RelatedI created a ISO under DeVeeDee and went to burn it with Brasero (also tried with K3B) and they both came up with error messages.k3b comes up with "Internal error. Short read! Please report" and stops at around 3% and 3-4 minutes into burning. The same error happens under Brasero, it'll stop after a few minutes.
View 1 Replies View RelatedI am new to Linux currently using Lubuntu , Puppy etc . What I did with Lubuntu I downloaded iso image burnt it into a CD and boot from that CD thats it. Apparently Debian has no iso download link. It is asking me to install with jigdo (I am not familiar with it). I dont want to use a CD with minimal install (because of slow internet speed) How to download an iso CD image
View 2 Replies View RelatedAm trying to burn an iso image that i downloaded. When using Brasero (even on the slowest burn) and at the end i get an error message. Have also tried XfBurn, but when i choose the file the image is in and click to open it appears on the very top of the panel and i can't get into it.
View 11 Replies View RelatedI have download Slackware 13.37 DVD via bit torrent.But it contain several files in addition to ISO image.I try to burn that folder which contain all this files as image.But it detect only the ISO image. Do i need to burn all this files to DVD or if i burn only the ISO image file will it work.Can i burn them in data format to a DVD.
View 1 Replies View RelatedIf I have ubuntu installed on some machine, how can I burn the ubuntu image that is on that machine onto a DVD so I can install that exact image onto a new machine?
View 2 Replies View RelatedI read in the F11 install guide that you can download a install iso image and then do an internet install. Since my F11 DVD hasn't arrived yet; I downloaded that ISO ; and figured it'd be a quicker install anyway, since that way I'd avoid having to download all the updates after the DVD install.I have a USB CD-RW drive attached to my laptop, currently running F7. Almost all of the instructions I see for burning a CD image are for Win users and Win software. I did download Brasero and it's acting flaky; it seems to want to unmount my CDRW drive, even when I'm logged in as root; so it doesn't give me that option to burn to that disk.
I found K3B, but that's for KDE and I'm using Gnome -- is there any good CD burning software (with a link please?) I can use?
I am having trouble burning an iso disc image that I downloaded of the Windows Vista Recovery disc for a friend who cannot boot her computer anymore. I downloaded the iso disc image and it mounts on my computer just fine, so it should be able to be burned as the disc image to a CD no problem. However, each time I right click on the iso file, and go down to Write to Disc, and then the menu comes up and I make sure that the destination drive is my CD/DVD burner drive with a blank CD-R in the drive, it burns the disc, but it always ends up being a CD with the file of the iso on the disc...!! It doesn't burn the image, it burns a copy of the image as a file! I uninstalled the CD/DVD burning software that was on my computer and installed CD/DVD Creator instead from the Ubuntu Software Center.
I tried following the steps on [URL] which tells how to burn a disc image from an ISO file. I follow it exactly, but I still get the same results: I get a disc that is not the image, but has the image on the disc. Now, I can mount the image on the disc on my computer, but that won't do my friend any good who needs to BOOT off this disc to fix her computer running Windows Vista. But ever since I wiped out my computer and went Ubuntu, I haven't been able to write an iso disc image to a CD or DVD properly. Does it matter if it is a CD or a DVD that is used? Like, if I put a DVD in, would the disc iso image burn to the DVD rather than a CD because of the way the image was made? For some reason I never thought it mattered, but does it?
Im still a newbie in Linux. I would like to know how to burn an ISO image to DVD using RHLServer.
View 4 Replies View RelatedI am using Oracle Enterprise Linux version 4 update 7. I would like to create and burn iso images via the terminal. Assume I have a folder called movies in directory /root/Desktop.I would like to create a movie.iso image ans burn it using mkisofs and cdrecord.
View 3 Replies View RelatedI've been tring to burn an iso image to a DVDRW using K3B and the progress has been setting a 99% for almost an hour. the iso image is only 2GIGS. why is it taking so long?
View 8 Replies View RelatedI'm trying to create a DVD, I'm using DVDStyler 1.7.2 on Jaunty. The problem I'm having is that whenever I try to burn or make an ISO image, it crashes. Usually at the "Create menu mpeg" line on the Generate DVD dialog.
View 8 Replies View RelatedI am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies View RelatedI've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedI'm trying to get a Digi Edgeport/8 working under x86_64 CentOS 5.3. This is a USB to serial conversion box that takes a single USB port and breaks it out into 8 DB-9 serial ports. We're running the 2.6.18-128.el5 x86_64.
This box has worked fine on many systems for us from RedHat 7.3 to Fedora Core 5 from everything back to the 2.4.20 kernel up to 2.6.16.16. On the CentOS box, in /boot/config-2.6.18-125.elf, the following is set:
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
Which is all we've ever had to do in the past and plugging the box in to the system, it will auto-configure.
what I need to do to get this working in the CentOS 5.3 64-bit world??? Time is critical for this to get fixed!
i like to use my DVB-C Card KNC-One on Centos 5.5 x86_64. But i cant get it to work. on a 32 Bit Centos this is working like a charm. I tryed several different kernels together with the video4linux-kmdl
At the moment i am using this kernel: 2.6.18-194.3.1.el5.centos.plus
[Code]....
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
In the system-config-display the system sees the video card but when you look in the Configuration tab it is running on the vesa - generic driver.I downloaded the latest driver from ATI for x86_64 Linux and after I ran it there was an error that it could not find X-server:
[root@coopers ATI-4770]# chmod +x ati-driver-installer-10-5-x86.x86_64.run
[root@coopers ATI-4770]# ./ati-driver-installer-10-5-x86.x86_64.run
Created directory fglrx-install.ob5679
[code]....
I recently tried to burn an ISO image to a DVD. Everything seemed to be going fine except Brasero froze at "Finalizing". It stayed there for about 10 minutes before I gave up. When I hit cancel nothing happened. When I tried to eject the drive nothing happened. Not until I shut the computer down and restarted was I able to open my DVD drive. Upon trying to read the disc no computer shows that it has anything on it.
View 13 Replies View RelatedThere is a command that you can type into the terminal that would "burn" an iso image to a storage device (usb). In ubuntu, this command would be <dd if=(path leading to iso) of=(device to be "burned" to)> Is this the same in Fedora, or is it a different command?
View 6 Replies View RelatedI have downloaded all files from [URL]... and burnt a DVD. How can I now install centOS 5.3 on my server/computer ?
View 4 Replies View RelatedI need to upgrade from xen-3.0.3-64.el5_2.9 which includes xen 3.1 to something that includes >= xen 3.2
1. what happened to xen-3.0.3-64.el5_2.9 and
2. where I can get an rpm for a x86_64 box with a xen version >= 3.2?
I am trying to install the ATI 10-11-x86.x86_64 But I have problems attached the installation log file
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[Code]...