Ubuntu Multimedia :: Does Not Burn ISO Disc Image To CD

Jan 4, 2011

I am having trouble burning an iso disc image that I downloaded of the Windows Vista Recovery disc for a friend who cannot boot her computer anymore. I downloaded the iso disc image and it mounts on my computer just fine, so it should be able to be burned as the disc image to a CD no problem. However, each time I right click on the iso file, and go down to Write to Disc, and then the menu comes up and I make sure that the destination drive is my CD/DVD burner drive with a blank CD-R in the drive, it burns the disc, but it always ends up being a CD with the file of the iso on the disc...!! It doesn't burn the image, it burns a copy of the image as a file! I uninstalled the CD/DVD burning software that was on my computer and installed CD/DVD Creator instead from the Ubuntu Software Center.

I tried following the steps on [URL] which tells how to burn a disc image from an ISO file. I follow it exactly, but I still get the same results: I get a disc that is not the image, but has the image on the disc. Now, I can mount the image on the disc on my computer, but that won't do my friend any good who needs to BOOT off this disc to fix her computer running Windows Vista. But ever since I wiped out my computer and went Ubuntu, I haven't been able to write an iso disc image to a CD or DVD properly. Does it matter if it is a CD or a DVD that is used? Like, if I put a DVD in, would the disc iso image burn to the DVD rather than a CD because of the way the image was made? For some reason I never thought it mattered, but does it?

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Burn Mpg To Dvd - Disc Error

Apr 25, 2011

I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.

View 9 Replies View Related

Ubuntu Multimedia :: Video Converter - Convert AVI Into DVD Format To Burn A Disc

Jun 3, 2010

I am looking for a video converter that will convert AVI into DVD format to burn a disc. I had a program called convert X for windows 7 and with that I was able to make menu's for the DVD and when it finished converting, it would burn it to a disc.

View 2 Replies View Related

Ubuntu Multimedia :: How To Burn An UDF Image

Feb 12, 2010

Ubuntu 9.10 here.

I'm trying to preserve my DVD collection, so I want to use DVD backups instead of the originals. I did the following:

Code:
$ dd if=/dev/sr0 of=FightClub.iso bs=2048 conv=notrunc
$ ls -l FightClub.iso
-rw-r--r-- 1 rdl rdl 8039299072 2010-02-10 09:55 FightClub.iso

[Code]....

I tried brasero and k3b, but, after burning, I cannot read the disks on my PC or DVD player...

View 2 Replies View Related

Ubuntu Multimedia :: Convert DMG Into Disc Image Compatible With AcetoneISO?

Apr 27, 2011

I have a DMG that I need to convert into a disc image compatible with AcetoneISO. It is compatible with ISO, BIN, NRG, MDF, AND IMG.

View 3 Replies View Related

Ubuntu Multimedia :: DVDStyler Crashes On Burn Or Make ISO Image?

Mar 27, 2010

I'm trying to create a DVD, I'm using DVDStyler 1.7.2 on Jaunty. The problem I'm having is that whenever I try to burn or make an ISO image, it crashes. Usually at the "Create menu mpeg" line on the Generate DVD dialog.

View 8 Replies View Related

Ubuntu :: K8.04 K3b Broken - Can't Burn 10.04 Disc

Apr 29, 2010

CD-R/W+DVD-R/W drive works fine for reading.

The last time I used it to burn was about a year ago. New discs are detected and I am offered to burn in K3b but K3b asks for media to be inserted (it already is).

Searched on some of these errors and this is a problem for others with indifferent solutions. Username is in cdrom group and /dev/scd0 is group cdrom rw. Latest updates and reboot changed nothing. Plus I am getting the k3b locale error even though I have LC_ALL="en_US.UTF-8" in my /etc/default/locale.

K3b runs after the warning but the Burn CD Image dialog always displays Burn Medium: Please insert an empty CD-R(W) medium... even though there is a CD-R in the drive.

So, I have a 10.04 ISO and no way to burn it.

Code:
$ wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
0 dev='/dev/scd0' rwrw-- : '_NEC' 'DVD+RW ND-5100A'
-------------------------------------------------------------------------

[Code]....

View 5 Replies View Related

Ubuntu :: Any Way To Burn A Disc From .mdx File

Jun 24, 2010

Is there any way to burn a disc from .mdx file or convert it to more popular format?

View 1 Replies View Related

Ubuntu :: Burn A Blu Ray Disc In System?

Feb 4, 2011

I was wondering if someone could tell me how I can burn my data files onto a blu ray disc. I have the blue ray discs, I have the blu ray reader/writer. CD/DVD Creator and Brasero failed me.

View 3 Replies View Related

Ubuntu :: Burn A Windows 7 Iso To A Blank Disc

Nov 21, 2010

I've been trying to burn a windows 7 iso to a blank disc in ubuntu.

I've tried right click-write to disk, it writes it but the disc won't boot and when I look inside the disc there's no files present.

I tried doing it with cd creator and it gives me some messages like.

"Do you want to create a disc from the contents of the image or with the image file inside?"

"There is only one selected file

("xxxxxx.iso") It is the image of a disc and its contents can be burnt."

I click "burn as file"

Then I get a message saying "Do you really want to add "xxxxxx.iso to the selection and use the version of ISO9660 standard to support it"?

"the size of the file is over 2gb. Files larger than 2gb are not supported by iso9660 standard in its first and second versions. it is recommended to use the third version of iso9660 standard which is supported by most operating systems including linux and all versions of windows."

I click add file.

Then it starts "estimating the file size" It says please wait untill this operation is completed, but it never does, I left it for 2 hours.

I also tried burning with infra record in windows and get some error messages, and I also tried brasero in ubuntu with no success.

View 9 Replies View Related

Applications :: Burn 2 Disc In The Same Time With K3b?

Sep 23, 2010

Can i burn 2 disc in the same time with k3b ?

View 4 Replies View Related

Software :: Have 2 Iso's That Are Movies That Need To Burn Into 1 Disc ?

Sep 16, 2010

I have 2 iso's that are movies that i need to burn into 1 disc. what can use to accomplish this? i try to use brasero but i can only do one.

View 5 Replies View Related

Ubuntu Installation :: Active ISO Burner And It Can Not Burn The Disc?

May 6, 2010

I've downloaded the ISO file but not sure if we need an 800 MB because i am trying with active ISO burner and it can not burn the disc.

Please tell me, this is the first time i am planning to use linux. I am a windows user.

View 5 Replies View Related

Ubuntu :: Burn An ISO To A Blank DVD With Brasero Disc Burner?

Jul 10, 2011

I have been trying to burn an ISO to a blank DVD with Brasero Disc Burner, but every time I try, it gets at around 93% done, then gives me:

"The disc could not be ejected, though it needs to be removed for the current operation to continue"

I have attached a screenshot of the error. And this is not my error screenshot, I have a different DVD Drive. I just attached this one because I didn't want to wait for it to give me an error again so I could take my own screenshot.

Does anybody know why this happens? Or a way to fix it? Or a different software to burn ISO to DVD that is as simple as this one.

View 4 Replies View Related

Hardware :: Burn An ISO And Making A Multisession Disc

Dec 3, 2009

Say I have an Ubuntu Remix that's only 300 MB.

Normally when i burn it to a 700MB CD-R the extra 400 MB is wasted.

Is there a way I can burn a multisession disc from an ISO?

I tried using this command once but it didn't work.

cdrecord dev=0,0 -v -eject speed=16 fs=16m -multi clonezilla-live-1.2.2-31.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 3 = CD-ROM XA mode 2
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

View 3 Replies View Related

OpenSUSE Hardware :: Can't Burn To DVD-R Disc With Plextor PX-716SA?

Apr 14, 2010

I am unable to burn to DVD-R media using a Plextor PX-716SA SATA drive. I have tried using K3b, Brasero, and Nero Linux. What happens is that the first 5 to 6 MB (possibly just lead-in) of the data is burned before the burner gives up and remains locked. I cannot remove the disc, the burning software remains frozen (no response after hitting software 'cancel recording' button), and the software process stays "uninterruptible" and thus unable to kill. The only way to remove the disc is by rebooting the PC.

The behavior also occurs if I run a test/simulated mode with the aformentioned software, but nevertheless I've been using Taiyo Yuden 8x DVD-R media. Successful burns and simulations have occurred with DVD+RW media, CD-R, and CD-RW; I don't have any DVD+R nor DVD-RW discs to test. Burning on DVD-R has worked excellent in Windows Vista with many software programs. The latest Plextor firmware has been installed on the drive, which is version 1.11. I am currently running openSUSE 11.2 with kernel version 2.6.31.13.

To investigate this further, I've tried burning from the command line using the actual programs the front-ends use to obtain specific error messages, including growisofs, cdrecord (wodim), and cdrskin. No succesful burns. For the following tests, the source data has been an ISO image of openSUSE 11.2. Nonetheless, custom data compilations have also failed, along with other DVD images showing similar error messages.

[Code]...

I have searched plenty of forums with no fixes to this problem. There have been several issues posted involving Linux and Plextor drives but these posts are old with old kernel versions. As far as SATA is concerned, this Linux installation is on a 250GB SATA drive that has not exhibited problems of any kind.

View 8 Replies View Related

General :: Directly Burn A List Of Files To A CDROM Or DVD Disc?

Jun 23, 2011

"List.lst" is my file containing my files. How may I burn them onto my blank disc with either growisofs or cdrecord? Usually it is based on a copy of a folder to a temp folder, and burn this folder. but I would like to use a file as input. man growisofs is not so widely full of explanations.. .

View 4 Replies View Related

Fedora :: F12 K3b Error - Can't Burn Any Kind Of Disc Using Internal Sata Burner (sr0)

Mar 3, 2010

It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...

[Code]....

View 5 Replies View Related

Ubuntu :: K3b Won't Burn Image - Get Empty Dvd

Jun 26, 2010

Why can't I burn image with k3b After I' ve tried to burn it it says: "Completed succesfully". But when I then check my DVD, there's absolutely NOTHING on it... and there it says:"0 Objects"It seems like it has only got a new label.And burning an image should else be one of the most easy things in life...And it SEEMS very easy when reading a tutorial.

View 2 Replies View Related

Ubuntu :: Can't Burn ISO Image, Error After 3%?

Jul 21, 2011

I created a ISO under DeVeeDee and went to burn it with Brasero (also tried with K3B) and they both came up with error messages.k3b comes up with "Internal error. Short read! Please report" and stops at around 3% and 3-4 minutes into burning. The same error happens under Brasero, it'll stop after a few minutes.

View 1 Replies View Related

Ubuntu :: Burn An Iso Image That Downloaded?

Jan 14, 2010

Am trying to burn an iso image that i downloaded. When using Brasero (even on the slowest burn) and at the end i get an error message. Have also tried XfBurn, but when i choose the file the image is in and click to open it appears on the very top of the panel and i can't get into it.

View 11 Replies View Related

Ubuntu :: How To Burn Current Image To DVD?

Apr 20, 2010

If I have ubuntu installed on some machine, how can I burn the ubuntu image that is on that machine onto a DVD so I can install that exact image onto a new machine?

View 2 Replies View Related

General :: Burn An Iso Image To DVD?

Jan 4, 2011

Can you please let me know how to burn and iso image in my home directory to a DVD?

View 5 Replies View Related

OpenSUSE Install :: Dd Won't Burn Iso Image?

Jan 30, 2010

I downloaded a live cd iso image from factory but can't get it to burn.

Code:
laptop:/downloads # dd if=./openSUSE-KDE-LiveCD-x86_64-Build0416-Media.iso of=/dev/sr0 bs=4K
dd: opening `/dev/sr0': Read-only file system

[code]....

View 9 Replies View Related

Debian :: How To Download ISO Image And Burn It Into CD

Sep 20, 2010

I am new to Linux currently using Lubuntu , Puppy etc . What I did with Lubuntu I downloaded iso image burnt it into a CD and boot from that CD thats it. Apparently Debian has no iso download link. It is asking me to install with jigdo (I am not familiar with it). I dont want to use a CD with minimal install (because of slow internet speed) How to download an iso CD image

View 2 Replies View Related

General :: How To Burn Slackware 13.37 DVD Iso Image

May 12, 2011

I have download Slackware 13.37 DVD via bit torrent.But it contain several files in addition to ISO image.I try to burn that folder which contain all this files as image.But it detect only the ISO image. Do i need to burn all this files to DVD or if i burn only the ISO image file will it work.Can i burn them in data format to a DVD.

View 1 Replies View Related

CentOS 5 :: 5.5 X86_64 DVD ISO Image Burn In 1 DVD And 1 CD?

Jan 28, 2011

Just finished downloading the CentOS5.5 x86_64 DVD images (2 ISO's), and realize that I have almost run out of DVD-R's. First ISO is a perfect fit for the 4.7GB DVD, the second only is ~400MB. Wondering if there may be any issue if I burn the second one to a CD (which I have plenty). I guess it should be okay, but wanted to double-check.

View 2 Replies View Related

Software :: Command To Write DVD (Disc Image)

Feb 25, 2010

Will Brasero do DVDs? Or if it doesn't, what's the growisofs commands to write a DVD?

View 2 Replies View Related

Fedora Installation :: F7 Software To Burn Iso Image To CD

Jun 13, 2009

I read in the F11 install guide that you can download a install iso image and then do an internet install. Since my F11 DVD hasn't arrived yet; I downloaded that ISO ; and figured it'd be a quicker install anyway, since that way I'd avoid having to download all the updates after the DVD install.I have a USB CD-RW drive attached to my laptop, currently running F7. Almost all of the instructions I see for burning a CD image are for Win users and Win software. I did download Brasero and it's acting flaky; it seems to want to unmount my CDRW drive, even when I'm logged in as root; so it doesn't give me that option to burn to that disk.

I found K3B, but that's for KDE and I'm using Gnome -- is there any good CD burning software (with a link please?) I can use?

View 3 Replies View Related

General :: Burn ISO Image To DVD Using Red Hat System Server?

Jul 3, 2011

Im still a newbie in Linux. I would like to know how to burn an ISO image to DVD using RHLServer.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved